Job Title: Lead Test Engineer, Power Distribution
Job Description
This is a new role at Trystar: you will set how Trystar proves each new power distribution product before it reaches customers. We are looking for a Lead Test Engineer, Power Distribution, to own the design verification and validation of our power distribution products and systems, from concept through certification and release to commercial-scale manufacturing. Our products include docking stations, transfer switches, loadbanks, distribution panels, switchboards, switchgear, and transformers, AC and DC, at low and medium voltage, and the integrated power distribution centers and e-houses that combine them for data centers and other critical power applications. You will develop the test methods, plans, and test setups that prove each design meets its requirements and the applicable UL, IEEE, and NEMA standards. You will also run type and pre-compliance tests, conduct and witness tests at Nationally Recognized Testing Laboratories (NRTLs) and high-power laboratories, and validate equipment at supplier factories, in integrated system tests, and at customer sites. You will work as a senior individual contributor with no direct reports, set up the verification and validation practices that design teams follow, and direct, on a project basis, the technicians and engineers who run tests with you.
Location: Houston, TX; Faribault, MN; Burnsville, MN; or Charlotte, NC, onsite. Travel within North America up to 30%.
What you will do:
- Own design verification by test and demonstration, and design validation, for assigned power distribution products and integrated systems, from concept through certification and release to commercial-scale manufacturing.
- Develop test methods, test plans, procedures, and acceptance criteria that trace to product requirements, design failure mode and effects analyses (DFMEAs), and applicable standards, and agree on the verification method for each requirement with technical leads and design engineers.
- Plan and run design verification and type tests, such as dielectric withstand, insulation resistance, temperature rise, short-circuit withstand and closing, endurance, and transformer ratio, impedance, and loss tests, and analyze the results.
- Plan reliability and accelerated life tests, and apply design of experiments where they reduce the risk of field failures.
- Verify enclosure performance to UL 50E and ANSI/NEMA 250, and to IEC 60529 where a customer specifies an IP rating, including rain, external icing, and corrosion-protection tests of NEMA Type 3R outdoor enclosures.
- Validate medium-voltage equipment, DC distribution equipment up to 1500 VDC, and AC and DC loadbanks, including their protection, controls, metering, and communications, and coordinate with power conversion test engineering where systems include rectifiers, converters, or solid-state transformers.
- Prepare products and samples for compliance testing, run pre-compliance tests, and conduct and witness listing tests at NRTLs and high-power laboratories, in coordination with the compliance team.
- Agree on factory test plans with suppliers of new components and subsystems, witness their factory acceptance tests, host customer witness tests of new products, and report results against the agreed acceptance criteria.
- Plan and run integrated system tests of first-of-a-kind power distribution centers and e-houses, and validation tests at pilot customer sites, in coordination with project, commissioning, and service teams.
- Design, build, and maintain test benches, fixtures, instrumentation, data acquisition, and interlocks, and keep test equipment calibrated with traceable records.
- Write and maintain energized test procedures with environmental, health, and safety staff under NFPA 70E, and direct technicians, electricians, and assemblers in safe test execution.
- Automate test sequences, data acquisition, and data analysis in Python, and maintain test records and test data.
- Record objective evidence for each verified requirement, write independent test reports, and present test status, anomalies, and residual risks at design reviews and verification of readiness reviews.
- Investigate test failures, support root-cause analysis with design and quality engineers, verify corrective actions by retest, and feed lessons learned into design guidelines and test standards across Trystar sites.
- Derive end-of-line test requirements for commercial-scale manufacturing from design verification results and hand them over to manufacturing at each release.
- Evaluate test equipment and methods, and specify laboratory capability investments as product voltage, current, and power ratings grow.
- Develop and maintain the product validation schedule, identify test dependencies and critical-path activities, and communicate test readiness, blockers, risks, and completion status to engineering and program leadership.
Qualifications
REQUIRED
- Bachelor’s degree in electrical engineering or a related technical field, with typically 7 or more years of relevant industrial experience in hands-on testing and validation of power distribution equipment.
- Experience with design verification and type testing of power distribution equipment, such as switchboards, switchgear, transfer switches, panelboards, transformers, or loadbanks, including test methods, plans, procedures, and reports traced to product requirements.
- Working knowledge of product and test standards for power distribution equipment, such as UL 891; UL 1558 and IEEE C37.20.1; IEEE C37.20.2 and C37.20.3; UL 1008; UL 67; UL 1640; UL 508 and UL 508A; UL 1561 and the IEEE C57.12 series; UL 50, UL 50E, ANSI/NEMA 250, and IEC 60529; and the National Electrical Code (NEC). Experience with every standard listed is not required.
- Experience preparing for and conducting or witnessing tests at NRTLs or high-power laboratories.
- Proficiency with most of the following: power analyzers, oscilloscopes, high-voltage and current probes, thermal data acquisition, hipot and insulation resistance testers, micro-ohmmeters, transformer turns ratio (TTR) testers, and current injection test sets.
- Proficiency with Python for test automation and data analysis.
- Experience planning and tracking test schedules, identifying dependencies, and communicating test readiness and risks to engineering and program leadership.
- Working knowledge of NFPA 70E and safe work practices for energized, high-voltage, and high-energy testing.
- Demonstrated experience leading test programs, influencing design teams, and directing technicians and engineers.
PREFERRED
- Master’s degree in electrical engineering, mechanical engineering, or a related technical field.
- Experience testing medium-voltage equipment, including lightning impulse (BIL), power-frequency withstand, partial discharge, and internal arcing tests to IEEE C37.20.7, and working knowledge of UL 1562 for medium-voltage dry-type transformers.
- Experience testing DC power distribution equipment up to 1500 VDC, including 800 VDC class systems, and validating loadbanks.
- Experience with factory and site acceptance testing of power distribution centers, e-houses, or similar integrated systems, including acceptance testing to ANSI/NETA standards.
- Experience testing controls and communications of power equipment, such as PLCs, transfer switch controllers, and Modbus, and working knowledge of UL 61010-1 and UL 61010-2-201.
- Experience with seismic, environmental, transport, vibration, structural, and lifting validation of electrical equipment and enclosures.
- Experience with test traceability, test data logging, and test data management systems.
- Experience with data center or other critical power applications.
- NETA Level 3 or Level 4 technician certification, NFPA Certified Electrical Safety Compliance Professional (CESCP), or Professional Engineer (PE) license.
Skills
- Analytical rigor and attention to detail in measurement, data analysis, and test documentation.
- Sound engineering judgment in balancing test coverage, risk, schedule, and safety, and independence and integrity in reporting results that constrain a design.
- Clear written and verbal communication of test results, anomalies, and limitations to technical and non-technical audiences.
- Collaborative technical leadership across electrical, mechanical, controls, compliance, quality, and manufacturing engineering, and with suppliers and customers.
- Disciplined planning, prioritization, and delivery of test campaigns against a development schedule.
Working Conditions You will work in laboratories, factories, and customer sites, including energized, high-voltage, and high-energy test areas, wearing the personal protective equipment that NFPA 70E and site rules require. The role requires standing, walking, climbing, kneeling, and reaching for extended periods, and lifting test equipment of up to 50 pounds, using mechanical aids where required. Travel within North America is up to 30%, including overnight stays at supplier factories, test laboratories, and customer sites. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.