Responsibilities:
The Cryogenic Division at SLAC National Accelerator Laboratory is seeking a Accelerator Technologist II – Cryogenics Plant Operator to support the operation of the Cryogenic Plant (2.0K Helium Refrigeration System) that is part of the LCLS Superconducting Linear Accelerator. You will work under general or intermittent supervision or under advisement from higher level Accelerator Technologists and perform task assignments of intermediate complexity in instrumentation & controls work and one or more technical areas of mechanical, refrigeration/vacuum, electrical/electronics, etc. all of which are part of the cryogenics plant operator skillsets. The Technologist II will conduct a block of work as instructed or assist as a portion of a larger and more diverse project, with strict adherence to site-specific safety as well as work planning and control (WPC). Given the nature of this position, SLAC will require onsite work.
Specific job duties include but are not limited to:
- Calibrate, test, and validate sensors (such as temperature, pressure, level, and flow transmitters) under cryogenic conditions.
- Perform preventive and corrective maintenance on cryogenic hardware, vacuum systems, transfer lines, and control loops.
- Diagnose and resolve electrical, signal, or mechanical issues in complex process and data acquisition systems.
- Specify, procure, and install new instrumentation and wiring into facility-wide control, safety interlock, and monitoring networks (e.g., PLCs, or SCADA).
- Ensure strict adherence to safety protocols for handling liquefied gases (like liquid nitrogen, helium, etc.) and working in hazardous or restricted environments.
- Perform tests and precision specification measurements on system components and multiple utility support systems.
- Utilize a wide variety of tools and equipment, such as specialized hand tools, portable electronic test equipment, and calibration/maintenance tools.
- Diligently maintain equipment operating records and daily log sheets to ensure compliance and traceability.
- Collaborate with experimenters, engineers, physicists, and other groups on the design, installation, modification, and performance of cryogenic systems.
- Become proficient and improve multiple operator skills sets; seek thorough understanding of Instrumentation & Controls, mechanical tech and electrical/electronics principles and hardware.
- Work on and around pressure systems, confined spaces, and elevation sometimes requiring fall protection.
- Work schedule may include overtime hours, off-shift, weekends & holiday schedules.
Note: Technologist II is expected to perform intermediate assignments in at least one discipline/skill in mechanical work, instrumentation & controls, refrigeration/vacuum, process control or electrical/electronic.
Qualifications:
- H.S./GED or vocational school apprenticeship, plus two years of laboratory or industrial mechanical/electrical experience can be substituted. College, Technical degree, or military training, preferred.
- Demonstrated electrical-mechanical aptitude and ability to perform intermediate complexity controls/instrumentation job duties.
- Ability to read and interpret instrumentation, piping, electrical and electronic drawings, and sketches.
- Understanding of basic principles of cryogenic engineering including properties of helium & nitrogen gases and Ohm’s Law; pressure & temperature, vacuum, cryogenic fluids, electrical/instrumentation.
- Demonstrated mechanical aptitude and/or practical understanding of laws of electricity
- The ability to learn to use a wide variety of hand & power tools.
- The candidate should be familiar with site environmental and safety rules, regulations, and requirements, and be trained to handle, store, and dispose of hazardous materials appropriately.
- Demonstrated use of solid math skills & computer proficiency.
- Demonstrated understanding and ability to control the helium cryogenic process.
- Demonstrated ability to install, maintain, calibrate, and diagnose pneumatic and electronic instruments and control loops: ability to read and understand PLC Ladder Logic
- Demonstrated knowledge and experience in multiple cryogenics technical operator skillsets such as Instrumentation & Controls, Gas Process, and electrical/electronic principles and hardware.
- Requires demonstrated ability to learn new skills, gain technical knowledge, and ability to work under supervision and written & verbal instruction.
- Able to effectively communicate technical issues with senior engineers, operators, tech support personnel, vendors, and others in a diverse multicultural environment.
- Knowledge of pressure systems including pressure vessels, piping and safe operation thereof.
- Ability to operate forklifts, overhead cranes, scissor lifts, boom lifts, and other industrial equipment.
- Must possess a valid driver’s license to drive vehicles on site.
SLAC Competencies:
- Effective Decisions: Uses job knowledge and solid judgment to make quality decisions in a timely manner.
- Self-Development: Pursues a variety of venues and opportunities to continue learning and developing.
- Dependability: Can be counted on to deliver results with a sense of personal responsibility for expected outcomes.
- Initiative: Pursues work and interactions proactively with optimism, positive energy, and motivation to move things forward.
- Adaptability: Flexes as needed when change occurs, maintains an open outlook while adjusting and accommodating changes.
- Communication: Ensures effective information flow to various audiences and creates and delivers clear, appropriately written, spoken, presented messages.
- Relationships: Builds relationships to foster trust, collaboration, and a positive climate to achieve common goals.
PHYSICAL REQUIREMENTS/ WORKING CONDITIONS:
- Consistent with its obligations under the law, the University will provide reasonable accommodation to any employee with a disability who requires accommodation to perform the essential functions of his or her job.
WORK STANDARDS:
- Interpersonal Skills: Demonstrates the ability to work well with Stanford colleagues and clients and with external organizations.
- Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for environment, safety and security; communicates related concerns; uses and promotes safe behaviors based on training and lessons learned. Meets the applicable roles and responsibilities as described in the ESH Manual, Chapter 1 General Policy and Responsibilities: http://www-group.slac.stanford.edu/esh/eshmanual/pdfs/ESHch01.pdf
Core Duties:
- Work on assignments requiring intermediate expertise in in one discipline or skill with some level of efficiency and minimum supervision while learning to maximize compliance with established work and planning procedures.
- Work on assignments at the component, module, or sub-system level.
- Follow explicit technical guidance for new or unfamiliar procedures.
- Recurring, routine technical work is reviewed generally for conformance to specifications.
- Perform assigned duties in compliance with site-specific requirements as determined by work planning and control (WPC) protocols.
- May perform any of the duties described in the Accelerator Technologist I specification or other duties as assigned.
- Adhere to safety rules.
Minimum Education and Experience Intermediate level proficiency and work experience on several different technical assignments or a combination of education and relevant work experience. Additional two years of applicable experience may substitute for formal education.
Knowledge, Skills and Abilities:
Accelerator Technologist II has all the qualifications described in the Accelerator Technologist I specification plus the following qualifications:
- Demonstrated proficiency and work experience on several different technical assignments such that working knowledge will include some breadth in areas such as layout, fabrication, trouble-shooting, test, repair and modification of technical equipment.
- Must have experience with the applicable test, assembly and fabrication tools.
- Must be able to perform all work in accordance with established safety and work planning and control procedures.
Certificates and Licenses Required Valid California Non-commercial Class C Driver's license.
SLAC National Accelerator Laboratory explores how the universe works at the biggest, smallest and fastest scales and invents powerful tools used by researchers around the globe. As world leaders in ultrafast science and bold explorers of the physics of the universe, we forge new ground in understanding our origins and building a healthier and more sustainable future. Our discovery and innovation help develop new materials and chemical processes and open unprecedented views of the cosmos and life’s most delicate machinery. Building on more than 60 years of visionary research, we help shape the future by advancing areas such as quantum technology, scientific computing and the development of next-generation accelerators.
SLAC is operated by Stanford University for the U.S. Department of Energy’s Office of Science. The Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time.
The job duties listed are typical examples of work performed by positions in this job classifications and are not designed to contain or be interpreted as a comprehensive inventory of all duties, tasks and responsibilities. Specific duties and responsibilities may vary depending on department or program needs without changing the general nature and scope of the job or level of responsibility. Employees may also perform other duties as assigned.
Consistent with its obligations under the law, the University will provide reasonable accommodation to any employee with a disability who requires accommodation to perform the essential functions of their job.
All employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, marital or family status, sexual orientation, gender identity, or genetic information. All staff at SLAC National Accelerator Laboratory must be able to demonstrate the legal right to work in the United States. SLAC is an E-Verify employer.
As a national laboratory, SLAC National Accelerator Laboratory is responsible for adhering to the Homeland Security Presidential Directive 12 (HSPD-12) and Department of Energy (DOE) Order 473.1A, which require employees to obtain and maintain a HSPD-12 Personal Identify Verification (PIV) Credential. To obtain this credential, employees must successfully complete the applicable tier of federal background investigation post hire and receive a favorable federal adjudication. The tier of federal background investigation will be determined by job duties and national security or public trust responsibilities associated with the job. All tiers of investigation include a declaration of illegal drug activities, including use, supply, possession, or manufacture within the last 1 to 7 years (depending on the applicable tier of investigation). Illegal drug activities include marijuana and cannabis derivatives, which are still considered illegal under federal law, regardless of state laws.
For foreign national candidates:
If you have not resided in the U.S. for three consecutive years, you are not eligible for the PIV credential and instead will need to obtain a favorable Local Site Specific Only (LSSO) Federal risk determination to maintain employment. Once you meet the three-year residency requirement, you will be required to obtain a PIV credential to maintain employment. The tier of federal background investigation required to obtain the PIV credential will be determined by job duties at the time you become eligible for the PIV credential.