2nd shift 4:00pm-3:30am $18-23 based on experience This is a temp to hire opportunity for a company located in Chesterfield, MI The purpose of the lathe or mill operator is to produce precision parts for our customers. Summary of duties: 1) Maintenance of the machine • Check fluid levels indicated by maintenance check sheet located at your station • Fill out maintenance log as required by check sheet 2) Run first piece to be inspected • Power up machine (if necessary) • Check fluid levels per instructions • Check with lead operator or supervisor to ensure that the program being used is the one needed to run your job • Check all tooling 1) any questions, contact a lead operator or supervisor • Run the first piece • 1) Dimensionally check part for correctness per instructions • 2) Take part to quality control for approval • Any necessary changes to be made, contact a lead operator or supervisor 3) Start days production run • Check with supervisor to find out number of pieces needed to run for this job • Run the job complete for your operation or until next shift arrives after first piece approval 4) Clean work area daily • The operator is to keep the work center free from trash and debris • Mop area if needed • Wipe machine down (as needed) 5) Other items as required by supervision • Supervision may require the operator to perform other duties outside of those listed above • When doing other work, perform those duties according to its job description 6) Goals • A lathe or mill operators goal should be to complete the matrix training for their advancement into a lead operator position Please start your application with us at www.resourcemfg.com 1108 Gratiot Blvd Marysville MI 810-937-5058 Rmfg-porthuronmi@resourcemfg.com