Job Description
Job Title: Peg by Hand Department Name: Finishing Effective Date: 11/04/2026
Reports to (title): Manufacturing Supervisor # of Direct Reports: 0 # Indirect Reports: 0
Individual Contributor: XXYes, No Full Time/Part Time: Full time # Hours Per Week: 40-55 hours
Average Work Schedule: Monday – Friday 6:00 a.m. – 2:30p.m.; Overtime and Saturday shifts may be required based on production needs. Location: 40 Walter Jones Blvd. El Paso, TX 79906
Job Summary:
The Hand Pegger secures the shank area of handcrafted western boots by driving wooden pegs or brass nails by hand through the outsole into insole. Working with an awl, peg hammer, wooden pegs or brass nails, the pegger places each peg in a consistent pattern, spacing and depth to give the waist of the boot strength, support and a long service life. This traditional step is done with care on every pair, without damaging the sole or the upper, so that each boot meets Lucchese quality and craftsmanship standards.
Scope of job:
The Hand Pegger owns the hand pegging of the shank area on every pair, from receiving the boot after sole attaching to a pegged, inspected pair handed to the next operation.
Duties/Responsibilities:
All responsibilities may be modified based on business needs.
- Drive wooden pegs or brass nails through the outsole into insole using an awl, peg hammer and pegging tools.
- Read work tickets to confirm style, size, width, peg pattern and number of rows for each order.
- Inspect boots before pegging for loose soles, misplaced shanks or other defects; set aside and report any issues.
- Mark and punch peg holes with consistent spacing, alignment and angle, following the specified pattern.
- Set pegs to the correct depth so they hold firmly without splitting the sole or breaking through the insole.
- Keep the peg pattern symmetrical on both boots of the pair.
- Trim or level peg ends flush with the sole and insole surfaces as required.
- Inspect pegged boots for loose, broken, missing or misaligned pegs; correct or set aside nonconforming pairs.
- Keep pairs together and correctly tagged; route them to the next operation.
- Record production counts, rework and defects on work tickets or in the shop system.
- Keep tools sharp, clean and in good condition; report worn or damaged tools promptly.
- Follow all safety procedures, including safe use of awls, hammers and hand tools and required PPE.
- Keep the work area clean, organized and free of peg scraps and debris.
- Support other bottoming operations as assigned by the supervisor.
- Assist in other areas as directed by management.
Required Skills/ Abilities
- Experience working with leather, footwear, boots, or similar materials is a plus.
- Strong attention to detail and manual dexterity.
- Good hand-eye coordination.
- Ability to read and interpret work orders, patterns, and production specifications.
- Basic mechanical aptitude and troubleshooting skills.
- Ability to work in a fast-paced, production-driven manufacturing environment.
- Strong commitment to quality, productivity, and workplace safety.
- Ability to work effectively both independently and as part of a team.
- Professional attitude and reliable attendance.
- Excellent verbal and written communication skills. Preferred bilingual in Spanish and English.
- Excellent people's skills.
- Ability to read and interpret detailed work orders.
- Basic mechanical aptitude and troubleshooting skills.
- Strong attention to detail and time management skills.
- Ability to work independently while contributing to team goals.
- Ability to work in a fast-paced, production-driven manufacturing environment.
- Passion and desire for excellence by consistently exceeding quality expectations.
- Strong analytical and critical thinking skills.
- Ability to prioritize tasks daily/weekly.
- Ability to function well in a fast-paced manufacturing environment.
- Analyze issues effectively.
- Identifies root causes of problems.
- Machine operation
- Teamwork
- Workplace safety awareness
- Demonstrates professionalism.
- Maintains organized work processes.
- Share information effectively.
- Listen actively to team concerns.
- Build trust and credibility.
- Experience operating industrial sewing machines, preferably in footwear, leather goods or upholstery.
- Strong attention to detail and hand-eye coordination.
- Ability to read work orders and follow style specifications.
- Able to work seated at a station for extended periods and perform repetitive tasks.
- Preferred: experience with western boots or leather.
Safety and Compliance:
- Comply with all company safety policies, procedures, and applicable federal, state, and local occupational safety regulations.
- Lead by example in promoting a culture of safety, accountability, and hazard awareness throughout the production team.
- Ensure team members consistently use required personal protective equipment (PPE) and follow safe work practices.
- Conduct routine safety observations, workplace inspections, and housekeeping activities to identify and address potential hazards.
- immediately report, investigate, and document workplace injuries, near misses, unsafe conditions, and safety incidents, implementing corrective and preventive actions as appropriate.
- Ensure employees receive required safety training and reinforce compliance with established safety procedures and safe operating practices.
- Support emergency preparedness activities, including evacuation procedures, emergency response protocols, and participation in safety drills.
- Stop or suspend work when an unsafe condition presents an immediate risk to employees, equipment, product quality, or the environment, and promptly notify management.
- Maintain a clean, organized, and hazard-free work area in accordance with 5S and housekeeping standards.
Quality & Process Excellence:
- Ensure all products meet Lucchese quality standards and customer expectations.
- Reinforce adherence to established Standard Operating Procedures (SOPs).
- Prevent unauthorized process changes and escalate improvement opportunities through the appropriate approval process.
- Partner with Quality and Manufacturing leadership to investigate root causes and implement corrective actions.
- Continuously identify opportunities to improve processes, workflow, and quality.
Physical Requirements:
- Ability to sit continuously for a minimum of eight – hour shifts.
- Frequent repetitive hand and finger movement.
- Ability to occasionally bend, stoop, kneel, crouch, climb stairs, and reach above shoulder level.
- Ability to frequently use hands and fingers to handle, grasp, operate tools, equipment, keyboards, and other production-related devices.
- Ability to visually inspect products, equipment, production processes, and workplace conditions, including close and distance.
- Ability to hear and respond to verbal instructions, alarms, and other workplace communications.
- Ability to occasionally lift, carry, push, or pull materials or equipment weighing up to 50 pounds and, with or without assistance or mechanical lifting devices, move heavier items as required.
- Ability to work in a manufacturing environment with exposure to machinery, moving equipment, varying temperatures, noise, dust, and other conditions typical of an industrial setting while wearing required personal protective equipment (PPE).
- Ability to maintain regular and reliable attendance and work the scheduled hours necessary to meet business and operational requirements.
- Ability to perform repetitive trimming tasks for extended periods.
- Ability to work in a fast-paced manufacturing environment.
Education, Experience, and/or Certifications:
- High School Diploma or GED equivalent required.
- 2-3 years of experience in leather goods or boot manufacturing environment preferred.
- 5S Workplace Organization and Visual Management Training.