Reports to | Company leadership (Project Principal) Supervises | FOE/FOD Field Inspector Location | Project site, Atlanta, GA metro area Employment type | Full-time, project-based, 8-week assignment (40 hours/week)
Position Summary
The FOE Program Lead owns the Company’s Foreign Object Elimination program on the project. This person builds the program, runs it day to day, and is the Company’s single point of contact with the Client and the trades. Every report, findings log and the final closeout package leaves the Company under this person’s review.
Key Responsibilities
Program setup (week 1)
- Review the contract scope, project specifications (Divisions 23, 26 and 01 91 13 Commissioning) and the current construction and commissioning schedule.
- Build an equipment register by equipment tag for all electrical and mechanical equipment in scope.
- Set up FOE zones and inspection points, tied to equipment setting, close-up and energization milestones.
- Write inspection checklists for each equipment type (switchgear, transformers, UPS, busway, panelboards, generators, AHUs, liquid-cooling equipment).
- Define a findings severity scale, photo standards and reporting templates: daily field report, findings log and weekly summary.
- Submit the FOE program plan to the Client and confirm how findings will be communicated before work starts.
Coordination
- Meet daily with the Client’s superintendent and QA/QC lead to set inspection priorities from the look-ahead schedule.
- Coordinate with the electrical and mechanical trades and the commissioning team so inspections happen before covers go on, equipment is closed up or energized.
- Report findings to the Client promptly enough for action before close-up or energization.
- Attend project coordination and commissioning meetings as requested by the Client.
- Give short FOE awareness briefings to trade crews when the Client requests them.
Field execution
- Perform FOE/FOD inspections alongside the Field Inspector, taking the critical and high-risk equipment.
- Re-inspect equipment to confirm reported findings were corrected, and record the closure.
- Escalate repeat findings, trends and any condition that could cause equipment damage at energization.
Documentation and quality review
- Review and approve every daily field report and findings log entry before it goes to the Client.
- Prepare and issue the weekly summary: inspections completed, findings opened and closed, trends and open risks.
- Build and deliver the final closeout package, organized by equipment tag, at the end of the assignment.
- Keep all reports, photos and supporting data organized to meet the 7-year record-retention requirement.
Safety, compliance and administration
- Make sure the team works under the Company’s safety program and the Client’s site safety rules, including NFPA 70E boundaries.
- Report any accident to the Client within 2 hours and in writing within 24 hours.
- Track hours for both positions, obtain the Client’s written approval before any overtime, and submit billing backup to the Company before the 20th of each month.
Qualifications Required
- 8+ years in mission-critical or data center construction QA/QC, commissioning or electrical testing.
- 3+ years leading an FOE/FOD, QA/QC or commissioning program on site.
- Working knowledge of NFPA 70E, NEC, NETA acceptance testing and commissioning levels (L1–L5).
- Able to read single-line diagrams, equipment drawings, submittals and P6 schedules.
- Clear technical writing: findings that are factual, photo-backed and tied to an equipment tag.
- Current OSHA 30 and NFPA 70E training.
- Able to pass a drug and alcohol test and a site background or badging check.
Preferred
- Hyperscale data center experience with a large general contractor.
- NETA Level III or IV certification, a commissioning credential, or a PE license.
- Degree in electrical or mechanical engineering or a related field.
- Experience with construction document platforms (PMWeb, Procore, ACC/BIM 360).
Working Conditions
- Active construction site: walking full shifts, climbing ladders, working at heights and in tight equipment spaces.
- Lift up to 50 lbs; wear required PPE all day, including arc-rated PPE where required.
- Noise, heat and dust typical of data center construction.
How Success Is Measured
- FOE program plan submitted to the Client by the end of week 1.
- Daily reports issued every working day, by end of shift.
- Every finding logged the same day with photos, location and equipment tag.
- Every finding closed out or formally handed to the Client by the end of week 8.
- Closeout package delivered on schedule, organized by equipment tag.
- Zero recordable safety incidents.
Conditions of Assignment
These conditions come from the client contract and apply to both positions. Include them in each offer letter or onboarding packet.
• Findings, not approvals. Company staff report findings and recommendations. They do not accept or reject work, direct trade crews, or change project specifications. Findings go through the Program Lead to the Client, and the Client decides the action.
• Confidential reports. Reports, logs and photos go only to the Client or to people the Client authorizes in writing. No project photos, client or owner names on social media, in marketing or in personal files.
• Safety. Follow the Company’s written safety program and the Client’s site safety rules at all times. Report accidents within 2 hours, with a written report within 24 hours.
• Screening. Each person needs a drug and alcohol test within 90 days of reporting to site (unless covered by a compliant program), and I-9 employment eligibility verification.
• Conduct. Follow the Client’s harassment-free workplace policy (zero tolerance) and its gift and anti-corruption policies. Do not give or accept gifts beyond nominal business courtesies.
• Hours. No overtime and no additional personnel without the Client’s prior written approval.
• Records. All reports and supporting data are retained by the Company for 7 years after the assignment ends.