Electrical engineer jobs in Dublin, CA and nearby (378 jobs)

Electrical engineer jobs within 25 miles of Dublin, CA. Nearby towns and cities are included. Distances are straight-line, not driving distances.

Counted Nov 8, 2026

Hiring at a glance

View jobs

Open jobs: 378
Employers: 169

Advertised starting pay

Average starting payUSD / year: $144,708Across 102 listings
Average starting payUSD / hour: $62.10Across 14 listings

Employer-advertised starting pay, not employee salaries. Currencies and pay periods stay separate.

Where work happens

Remote: 0%0 listings
Hybrid: 6%21 listings
On-site: 34%128 listings

Not specified: 61% (229 listings)

Employers hiring include Applied Materials (24), Lockheed Martin (18), KLA Corporation (14).

Sources & calculation notes

These figures describe the listings on this role page at the date shown, not the whole job market. Listings can change.

Employer-listed minimums from at least 10 listings per currency and pay period. These are advertised starting amounts, not employee salaries. Jobs without a minimum and unusual amounts are excluded.

Hybrid and on-site classifications may be inferred from descriptions. Check the original ad. How we count

Electrical engineer jobs in Dublin, CA and nearby

Within 25 miles

Save this search

Added 1 day ago
Sr MTS Electrical Engineer
Applied Materials, Inc
Santa Clara, CA
Added 1 day ago
Senior Electrical Engineer, Robot Controller Hardware
Dexmate
Fremont, CA
We are looking for a Senior Electrical Engineer to design the onboard controller hardware for Dexmate’s robot platforms. You will own multi-processor architectures integrating NVIDIA Je
Added 1 day ago
Sr MTS Electrical Engineer
Applied Materials
Santa Clara, CA
Added 1 day ago
FE
Electronics Test Engineer II
Form Energy, Inc
Berkeley, CA
- $97,221 to $121,518 USD / year
Added 1 day ago
TT
Electrical Engineer
True Talent Solutions Partners
Santa Clara, CA
- $160,000 to $180,000 USD / year
Added 1 day ago
Senior/Principal R&D Electronics Engineer - National Security Products Center, NM/CA, Onsite
Sandia National Laboratories
Livermore, CA
Added 1 day ago
Early Career R&D Electronics Engineer - National Security Products Center, NM/CA, Onsite
Sandia National Laboratories
Livermore, CA
Added 2 days ago
Senior Electrical Engineer
Ultima Genomics
Fremont, CA
Added 2 days ago
Electrical Engineer
Hill Minimal 112022
Livermore, CA
Hill International is seeking an Electrical Engineer in Livermore, California
Added 2 days ago
Automation Electrical and Instrumentation Engineer
Cargill
Newark, CA
Added 3 days ago
Principal Power Electrical Engineer
Oracle
Santa Clara, CA
Oracle's Hardware Development Organization seeks to add an experienced On-Board Power Engineer to work within our Server Development team in Santa Clara, California or in Burlington MA. As…
Added 3 days ago
Instrumentation Engineer
WinMax Systems Corporation
Santa Clara, CA
Added 3 days ago
Electrical Engineer- Aerospace Avionics Products
OLSA Resources, Inc.
Santa Clara, CA
Added 3 days ago
Electrical Design Engineer
CMTA
Lafayette, CA
Added 3 days ago
A
Electrical Engineer
Actalent
Sunnyvale, CA
- $105 USD / hour
Job Title: Electrical EngineerJob DescriptionThe primary role of an Electrical Engineer is to design, develop, test, and oversee the manufacturing and installation of electrical equipment,…
Added 3 days ago
Senior Control Systems Engineer (Instrumentation & Controls)
HDR
Walnut Creek, CA
Added 3 days ago
IG
Electrical Engineer (Sustaining / Validation)
Insight Global
San Mateo, CA
- From $58 USD / hour
Strong electrical validation, test, and failure analysis experience
Added 3 days ago
Electronics Engineer Intern
Lockheed Martin
Palo Alto, CA
Currently enrolled in a Bachelor’s (or Master’s) program in Electrical Engineering, Computer Engineering, Computer Science, Applied Physics, or a related field.
Added 4 days ago
Motor Drive & Power Electronics Engineer, Robotics
Dexmate
Fremont, CA
Added 4 days ago
Electrical Engineer
Applied Materials, Inc
Santa Clara, CA
Added 4 days ago
IC
Water Utility Electrical Engineer
Innovation Consulting
Oakland, CA
- $115,000 to $160,000 USD / year
This temporary Water Utility Electrical Engineer role handles electrical and controls engineering for the planning, design, and construction of water facilities, onsite in San Jose, CA.
Added 4 days ago
L
Staff Electrical Engineer, Avionics
Longshot
Alameda, CA
- $180,000 to $220,000 USD / year
We are hiring a Staff Electrical Engineer to own electrical engineering across Longshot,
Added 4 days ago
Electrical Engineer
Applied Materials
Santa Clara, CA
Added 5 days ago
Electrical Engineer - Fremont, CA
Express Employment Professionals
Fremont, CA
This is a fully onsite role. We are seeking a versatile Electrical Engineer to join its New Product Development team. This is a hands-on engineering role for someone who brings a blend of…
Added 5 days ago
A
Electrical Engineer
Actalent
Sunnyvale, CA
- $105 USD / hour
Job Title: Electrical EngineerJob DescriptionThe Electrical Engineer designs, develops, tests, and oversees the manufacturing and installation of electrical equipment, components, and…

Dexmate

Senior Electrical Engineer, Robot Controller Hardware

Fremont, CA, United States

Apply About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 6, 2026

Original job description

ABOUT DEXMATE

Dexmate is building robot platforms and a universal Physical AI OS to make robots easier to build and deploy. We combine hardware and software into a plug-and-play platform for developers, researchers and enterprises, with an open ecosystem that supports the development of physical AI.

THE ROLE

We are looking for a Senior Electrical Engineer to design the onboard controller hardware for Dexmate’s robot platforms. You will own multi-processor architectures integrating NVIDIA Jetson modules, x86 hosts, and supporting MCUs, along with the sensor interfaces, networking, synchronization, and power systems that connect them.

This is a hands-on board design role spanning architecture, schematics, PCB development, bring-up, validation, and production release. You will work closely with software, systems, mechanical, thermal, and manufacturing engineers to turn robot requirements into reliable controller hardware.

RESPONSIBILITIES

Define controller hardware requirements with software and systems teams, including processing needs, sensor connectivity, interface bandwidth, synchronization, power budgets, and environmental constraints.
Architect multi-processor controller platforms integrating Jetson modules, x86 hosts, and MCUs. Define processing boundaries, inter-processor communication, peripheral connections, and dependencies across power, clock, reset, and boot domains.
Design custom carrier boards for NVIDIA Jetson modules, including AGX Thor, following platform design requirements and validating implementation on physical hardware.
Evaluate compute platform options, including NVIDIA Jetson, Qualcomm robotics platforms, and x86 processors, against robot performance, power, thermal, packaging, and lifecycle requirements.
Own schematic design, component selection, and PCB development for controller motherboards, carrier boards, and associated interface electronics. Execute layout or provide detailed technical direction and review.
Design and validate high-speed interfaces such as PCIe, multi-gigabit Ethernet, USB, MIPI CSI-2, and camera SerDes links. Define stackups, impedance targets, routing constraints, grounding, and return paths.
Design onboard networking and hardware time synchronization between processors, cameras, and sensors, working with software engineers to verify system behavior.
Develop board-level power architectures, including DC-DC conversion, sequencing, transient response, protection, monitoring, and fault reporting.
Analyze signal and power integrity risks, correlate assumptions with bench measurements, and resolve interface instability and power-related failures.
Lead board bring-up with embedded software engineers, debugging boot, reset, clocking, processor communication, peripheral enumeration, and sensor connectivity.
Define and execute validation plans covering interface performance, sustained workloads, power cycling, temperature, supply variation, and fault recovery.
Partner with mechanical and thermal engineers on connectors, cables, cooling, and packaging; support EMI/EMC testing and corrective actions.
Work with manufacturing and test teams on DFM/DFT reviews, prototype builds, production test coverage, component substitutions, and production release.

MINIMUM QUALIFICATIONS

5+ years of electrical hardware design experience with embedded processor systems, high-speed digital electronics, or similarly complex products, including at least one board taken through bring-up and production release.
Hands-on design of at least one custom NVIDIA Jetson carrier board, taken through board bring-up.
Demonstrated ownership of processor-based motherboards, system-on-module carrier boards, or comparable complex multilayer PCBAs, from schematic design through validation.
Experience designing hardware interfaces between processors, compute modules, MCUs, and peripherals, including power, reset, clocking, and boot dependencies.
Strong schematic design skills and proficiency with Altium, Cadence, or equivalent tools, with experience defining and reviewing high-speed PCB layouts.
Practical experience designing and debugging multiple high-speed interfaces, such as PCIe, Ethernet, USB, MIPI, or camera SerDes.
Strong understanding of signal and power integrity, including transmission lines, impedance discontinuities, return paths, decoupling, and power distribution networks.
Experience designing processor or compute-module power supplies, including regulator selection, load transients, sequencing, and protection.
Strong bench debugging skills using oscilloscopes, appropriate probing techniques, logic or protocol analyzers, and programmable power supplies.
Experience working with embedded software engineers to diagnose hardware/software interface issues and verify fixes on physical hardware.

PREFERRED QUALIFICATIONS

Experience with NVIDIA Jetson AGX Thor or AGX Orin, including carrier-board implementation, platform bring-up, and power and thermal integration.
Experience integrating multiple processor families within one controller platform, such as ARM with x86, or application processors with real-time MCUs.
Experience with Qualcomm robotics platforms or chip-down designs using Qualcomm SoCs, PMICs, and LPDDR.
Experience designing controller hardware for robots, autonomous vehicles, drones, or other systems constrained by power, space, and operating environment.
Experience with discrete processor and DDR memory integration, including layout constraints and timing validation.
Experience integrating multiple cameras and sensors over GMSL, FPD-Link, or multi-gigabit Ethernet.
Experience implementing hardware time synchronization using IEEE 1588/PTP or gPTP.
Experience with HDI PCB design, dense BGA fanout, and signal or power integrity simulation using tools such as HyperLynx, Sigrity, or Ansys.
Familiarity with embedded Linux, JetPack, pinmux and device tree configuration, boot diagnostics, and scripting for hardware validation.
Experience with EMC pre-compliance testing, environmental qualification, production test development, and manufacturing ramp.

Apply About employer

More about this job

Skills

Communication skills
Robotics
Packaging
Printed circuit boards
Reporting
Debugging
EMI
DFT
Design hardware
Ansys
Linux
Regulatory compliance

Report this job