Summary/Objective
The CNC Lathe Operator (Level II) produces machined parts by setting up and operating CNC Lathe machines, bar feeding or bar pulling operations, verifying machine operation, maintain accuracy and tolerances, and update travelers and routings.
Essential Functions
Must have mastered all the requirements of the previous level and master the following Functions:
- Plans machining chuck parts by studying work orders, blueprints, materials, and specifications.
- Edits programs for lathers by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches, calculating requirements, including basic math, geometry, and trigonometry.
- Sets-up lathes by adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices.
- Perform proper set-up and calibration procedures for all equipment and accessories to be used on projects.
- Calculate machine speed and feed ratios, and the size and position cuts.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Other duties as assigned.
Work Environment
While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Refer to detailed Physical Requirements document.
Supervisory Responsibilities
This position has no supervisory responsibilities.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Equal Opportunity Employer Veterans/Disabled
All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, sex, gender identity, age, marital status, genetic information, sexual orientation, national origin, disability (including pregnancy), veteran status, or any other characteristic protected by state, federal, or local law.
Physical demands sometimes describe the customary method of achieving an essential function. Physical demands may, in some instances, be accomplished using other methods.
PHYSICAL DEMANDS
Never/Rarely
<1%
Occasional
1-33%
Frequent
34-66%
Continuous
67-100%
Lift/Carry
1 to 10 lbs.
X
11 to 20 lbs.
X
21 to 50 lbs.
X
51 to 75 lbs.
X
76 to 100 lbs.
X
Push/Pull
1 to 10 lbs.
X
11 to 20 lbs.
X
21 to 50 lbs.
X
51 to 75 lbs.
X
76 to 100 lbs.
X
Balancing
X
Bend/Stoop/Twist
X
Crouch/Squat
X
Kneel/Crawl
X
Reaching Front
X
Reach Above Shoulders
X
Reach Below Shoulders
X
Sitting
X
Standing
X
Twisting
X
Walking
X
Hearing
X
Speech
X
Vision
X
Repetitive Arm Use
X
Repetitive Wrist Use
X
Repetitive Hand Use
X
Grasping
X
Squeezing
X
Sensation/Touch
X
Head Movement
X
Climb Stairs/Ladder
X
EQUIPMENT USE & OPERATION
Never/Rarely
<1%
Occasional
1-33%
Frequent
34-66%
Continuous
67-100%
Motor Vehicle
X
Forklift
X
Lawn Equipment
X
Using Hand or Power Tools
X
Operate Foot Pedals
X
ENVIRONMENTAL CONDITIONS
Never/Rarely
<1%
Occasional
1-33%
Frequent
34-66%
Continuous
67-100%
Exposure to electrical hazards
X
Work in cramped spaces
X
Exposure to dust/smoke
X
Exposure to fumes/odors/grease/oil
X
Works in hot/cold temperatures
X
Travel required
X
Works inside
X
Works outside
X
Exposure to noise
X
Exposure to chemicals
X
Stand on concrete
X
Vibration
X
Exposure to toxic materials
X
Works at unprotected heights
X
Walk on uneven or slippery surface
X
Works in wet conditions
X
Works with others
X
Works alone
X
Works with moving machinery
X
MENTAL DEMANDS
Never/Rarely
<1%
Occasional
1-33%
Frequent
34-66%
Continuous
67-100%
Problem solving
X
Analytical ability
X
Communication – oral
X
Communication – written
X
Money handling
X
Organization
X
Interpersonal skills
X
Calculating
X
Concentration
X
Perception
X
Creativity
X
Work with interruptions
X
DEXTERITY REQUIREMENTS
Never/Rarely
<1%
Occasional
1-33%
Frequent
34-66%
Continuous
67-100%
Eye/hand coordination
X
Fine manipulation (keying, writing, picking, pinching)
X
Handling (holding, grasping)
X
Wrist motion (repetitive flexion/rotation)
X
Qualifications
Qualifications
- Must be authorized to work in the U.S. without sponsorship.
Educations and Experience
- High school diploma, GED and/or Technical School Graduate with concentration in CNC Lathe operations or industry recognized certification.
- 6-9 years’ experience required.
- Experience with Okuma and/or Fanuc preferred.
- G-Code/M-Code Preferred.
Skills and Competencies
- Must have basic math skills.
- Able to read, write, and have a working knowledge of English.
- A knowledge of technical drawings is required.
- Knowledge in the use of basic measuring instruments such as calipers, micrometers, and dial indicators.
- Conceptual skills.
- Verbal Communication.
- Functional and Technical skills.
- Attention to Detail.
- Tooling.
- Coordination.
- Team Player.