Jobs in the United States

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added just now
Radiography Technologist - Per Diem - Flex - JDCH
Joe DiMaggio Children's Hospital
United States
Must possess an active Radiography Certificate from the State of Florida and must take the ARRT(R) examination Required and
Added just now
MS
Executive Chef
Mexican Sugar
Dallas, TX
- $75,000 to $95,000 USD / year
Food Manager certification required
Added just now
Advanced Quality Engineer
Re:Build Manufacturing
Kalamazoo, MI
…migrate to increasingly sophisticated program development and production, as well as the generation of our own products. Our unique set of capabilities lend themselves to highly complex…
Added just now
SL
Production Batching Controller (1st or 2nd shift)
Suja Life
Oceanside, CA
- $20 to $22 USD / hour
Must have strong verbal and written communication skills in English
Added 1 min ago
GP
Solar Technician
Geronimo Power, LLC
EDDY, TX
- $30 to $38 USD / hour
Operate and maintain equipment, including HV equipment, combiner systems, Inverters, pad mount transformers, control panels, MET stations, tracker systems, etc.
Added 1 min ago
GP
Solar Technician
Geronimo Power, LLC
Bloomington, MN
- $32 to $42 USD / hour
Operate and maintain equipment, including HV equipment, combiner systems, Inverters, pad mount transformers, control panels, MET stations, tracker systems, etc.
Added 1 min ago
Line Cook - Neon Fork -Steady Extra
Boyd Gaming
Las Vegas
Must have a minimum of six (6) months of experience as a cook
Added 1 min ago
Dietary Cook & Aide - Behavioral Hospital
Perimeter Healthcare
Arlington, TX
Prepare meals and beverages according to approved menus, recipes, and production schedules.
Added 2 mins ago
Quality Control Supervisor, Aerospace - 2nd shift
PPG
Huntsville, AL
PPG's Aerospace Business is looking for a Quality Control Supervisor to join our team in Huntsville, AL! As the Quality Control Supervisor, you will be responsible for the daily execution…
Added 2 mins ago
VP Corporate Services
GuideWell
Jacksonville, FL
Direct end-to-end event planning and execution, including venue selection, hospitality, catering, audiovisual production, transportation, logistics, security coordination, and service…
Added 2 mins ago
R
Information Systems Security Manager
RIVIDIUM
Saint Louis, MO
- $135,000 to $145,000 USD / year
Manage threat or target analysis of cyber defense information and production of threat information within the enterprise.
Added 2 mins ago
Mechanical Engineer
Intuitive
Sunnyvale, CA
The Senior Mechanical Engineer works in and/or leads cross-functional teams to maintain and improve the design, production, and service of the da Vinci® Surgical System. They will determine…
Added 3 mins ago
Senior Machine Learning Engineer
Atlassian
Remote, United States
…or a combination of the two. That way, Atlassians have more control over supporting their family, personal goals, and other priorities. We can hire people in any country where we have a…
Added 3 mins ago
Director of Product Management
RED CAT HOLDINGS
SLC, UT
…developing regional manufacturing localization and partner co-production whilst driving revenue growth across defense and commercial…
Added 3 mins ago
AVP, IT Enterprise Applications and Architecture
Realty Income Corporation
San Diego, CA
…ownership, roadmaps, operating standards, service expectations, and control accountability across Salesforce, ServiceNow, finance and treasury platforms, Microsoft 365 data and…
Added 4 mins ago
Shipping Material Handler - 1st Shift
Whirley-Drinkworks
Warren, PA
Checks Decoration and Assembly Department production cells for status of orders being produced.
Added 4 mins ago
Assembly Auditor Lead - Weekend Nights (Sat-Mon 5pm-5am)
US Conec, Ltd.
Fort Worth, TX
US Conec is seeking a detail-oriented Assembly Auditor Lead to join our weekend night shift team in Fort Worth, TX
Added 4 mins ago
X
Warehouse Reach Truck Operator
Xylem
Morton Grove, IL
- $23.09 to $28.86 USD / hour
Deliver raw materials, parts, and components to production areas as required.
Added 4 mins ago
Field Service Engineer IV
Xylem Services USA LLC
Groveport, OH · Columbus, OH
This role involves Control Panel experience and a combination of troubleshooting, maintenance on "Electrical and Instrumentation" systems, and altering/ navigating controls programming.…
Added 4 mins ago
CNC Machinist II
TECOMET
Lansing, MI
The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and…
Added 4 mins ago
CNC Machinist II
TECOMET
Lansing, MI
The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and…
Added 4 mins ago
Core Senior .NET Software Engineer
Evolent
Pierre, SD
Troubleshoot and resolve production issues, working to ensure high availability and reliability of services.
Added 4 mins ago
SNR. DIRECTOR DINING SERVICES - Georgia
Compass Group, North America
Pierre, SD
Two to four years of direct foodservice operational management experience with inventory and purchasing knowledge and control
Added 5 mins ago
Plant Director
SunOpta
Omak, WA
Develops and executes the plant’s strategic and operational plans to achieve production, cost, quality, safety, and environmental targets, influencing both direct reports and dotted-line…
Added 5 mins ago
Cook
Gateway Villas and Gateway Gardens
Marble Falls, TX
Experience with production methods, portion control and food handling safety required.

Williams International

Mechanical Engineering Technician - CNC Process Optimization

Ogden, UT, United States

Apply on recruiting.ultipro.com About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Oct 23, 2026

Original job description

Williams International has an exciting opportunity for a Mechanical Engineering Technician - CNC Process Optimization at our facility located at 3450 Sam Williams Dr., Ogden, UT 84401. Working within a team environment, the Mechanical Engineering Technician - CNC Process Optimization shall provide technical support to mechanical engineers for the development, optimization, validation, and implementation of CNC machining processes used to manufacture small gas-turbine engine components. Review and modify multi-axis CNC programs, setup parameters, production routings, tooling configurations, and inspection requirements; analyzes production variances; and collaborates with engineering, quality, and manufacturing personnel to improve process capability, dimensional conformance, product quality, and cycle time. Perform these duties under the direction of and in support of mechanical engineering personnel.

SPECIFIC DUTIES:

Manufacturing Process & Program Optimization: Review, modify, and optimize multi-axis CNC program toolpaths and operational code to eliminate manufacturing vulnerabilities on small turbine engine parts. Restructure tool sequences and program logic, such as relocating finishing steps and drilling sequences, to eliminate tool fracture risks and safeguard high-value aerospace components from structural damage and provide technical recommendations to mechanical engineers.
Technical Setup & Engineering Parameter Support: Prepare, audit, and update manufacturing setup documentation and technical instruction sheets for turbine component production. Evaluate operational parameters, including hydraulic and pneumatic chuck pressure settings, and recommend adjustments to mechanical engineers to eliminate component slippage, prevent tool stripping, and maintain part stability during machining.
Engineering Inspection & Quality Systems Coordination: Prepare and integrate quality checkpoints into production routing layouts. Coordinate implementation of Tooling Modification Instructions (TMI) and audit logs, ensuring production documentation identifies first-piece inspection criteria and quality verification steps prior to subassembly advancement.
Tooling Configuration & Cycle-Time Support: Analyze machining layouts to optimize tool placement and station positioning for gas-turbine component turning operations. Recommend tooling and turret configuration changes to mechanical engineers to reduce non-cutting movement, minimize unused indexing positions, and improve production cycle time.
Blueprint Review & Geometric Dimensioning: Interpret engineering drawings and dimensional requirements to identify inconsistencies between physical setups and approved specifications. Recommend fixture, support-point, or setup modifications to mechanical engineers to reduce distortion and protect critical component features during machining.
Technical Problem Solving & System Testing: Diagnose operational variances and execution discrepancies on the production floor. Evaluate system inputs, including air pressure limits, coordinate shifts, and gauge setup configurations, and provide technical recommendations to mechanical engineers to preserve the strict tolerances required for small gas turbine engine components.
Cross-Departmental Technical Support: Review engineering updates, project instructions, and component change requests to maintain alignment between the engineering department and production floor. Maintain technical records documenting manufacturing changes and engineering revisions to support compliance with aerospace quality standards.

This position is 100% onsite; no remote or hybrid option is available at this time.

M-F 40 hrs./wk. 8:00 am – 5:00 pm.

MINIMUM REQUIREMENTS:

High school diploma or equivalent.
Two or more years of experience supporting the manufacture of aerospace turbine engine components.
Two or more years of experience with CNC programming and setup for aerospace turbine engine components.
Two or more years of experience using and calibrating precision measuring gages in accordance with approved engineering and manufacturing procedures.

Please send your resume to Spencer Tibbets at stibbets@williams-int.com or mail your resume with cover letter to Human Resources at Williams International Co, LLC, 3450 Sam Williams Dr., Ogden, UT 84401 if interested in this position.

Apply on recruiting.ultipro.com About employer

More about this job

Skills

Mechanical engineering
CNC
Technical support
CNC machining
Manufacturing processes
Engine components
Documentation
Machining
Inspection
Quality control systems
Read engineering drawings
Problem solving
Coordinate shifts
Regulatory compliance

Report this job

Work requirements

Jobs in the United States