Jobs in the United States

25+ jobs

Save this search

Added 2 mins ago
Senior Development Engineer - Innovation Center
Elevate Textiles
Greenville, SC
The company is looking for Senior Development Engineer to work as part of its Innovation Center in Greenville, SC supporting the Burlington and Safety Component brands.
Added 7 mins ago
UO
Senior/Principal Electrical Engineer - Spacecraft and Instruments
University of Colorado Denver
Boulder, CO
- $34,986 USD / year
Design, analyze, build, and test the electronics behind space science missions.
Added 7 mins ago
UO
Flight Software Simulation Engineer
University of Colorado Denver
Boulder, CO
- $34,986 USD / year
LASP is looking for a Flight Software Simulation Engineer to join the spacecraft simulator team for a deep space mission that will tour the inner solar system and explore the main asteroid…
Added 12 mins ago
W
(USA) Senior, Software Engineer
Walmart
SUNNYVALE, CA
- $117,000 to $234,000 USD / year
Write clean, efficient, and maintainable code across multiple languages, driving full software development lifecycle including CI/CD and automated testing.
Added 39 mins ago
Air Proprietary Senior Tooling Engineer
The Boeing Company
Berkeley, MO
Refer to The Boeing Defense, Space & Security (BDS) team is seeking a motivated Senior Tooling Engineer located in Berkeley, MO .
Added 1 hour ago
Track Supervisor 106246
Canadian Pacific
Meridian, MS
Added 1 hour ago
ENGINEER TEST 1 - ALIGNMENT SPECIALIST
HII
Pascagoula, MS
The Engineer Test (Alignment Specialist) supports alignment, measurement, and verification activities for radar and gun foundations within the Test & Trials organization. This role requires…
Added 1 hour ago
UO
CIRES/NOAA Global Monitoring Laboratory, Research Engineer in Support of Atmosph
University of Colorado Denver
Boulder, CO
- $60,724 to $90,535 USD / year
The Cooperative Institute for Research in Environmental Sciences (CIRES) is seeking a research engineer to support the NOAA Global Monitoring Laboratory's (GML) Technology Transitions,…
Added 1 hour ago
UO
Senior FPGA Development Engineer
University of Colorado Denver
Boulder, CO
- $34,986 USD / year
The Laboratory for Atmospheric and Space Physics (LASP) is seeking an FPGA Design Engineer IV to serve as a senior technical leader for flight digital logic used in spaceflight science…
Added 1 hour ago
UO
Temporary Support Engineer
University of Colorado Denver
Boulder, CO
- $34,986 USD / year
…collaborative space where students can imagine, design, build, and test products and solutions to meet a range of societal and customer needs. The space includes Design Center Colorado and…
Added 1 hour ago
Release Train Engineer
Amentum
Springfield, VA
The Geospatial Enterprise Open Data Store (GEODS) contract provides integration, design, development, and sustainment for data services in support of the Federal Government.
Added 1 hour ago
Product Manager, Data Management
Amentum
Merrifield, VA
The Product Manager is responsible for overseeing the development of products from development to operational deployment, guiding Scrum Masters and developers through the requirements…
Added 1 hour ago
Quality Engineer
Better Impact
Remote, United States
Build the automation layer. API and end-to-end test coverage, integrated into each platform's delivery pipeline, with agentic and AI-driven tooling brought in deliberately so coverage…
Added 1 hour ago
Senior Materials and Process Engineer
ColdQuanta
Louisville, CO
We are seeking a Senior Materials and Process Engineer to own materials and manufacturing process development for the Quantum Gravity Gradiometer (QGG) program. This hands-on role turns…
Added 1 hour ago
Electrical Engineer- Tooling
NLIGHT Inc
Longmont, CO
Added 1 hour ago
Electrical Engineer - Tooling
NLIGHT Inc
Longmont, CO
Added 1 hour ago
Mechanical Engineer – Vacuum Opto Mechanical Assembly - 822
Quantinuum
Broomfield, CO
Added 1 hour ago
Civil Engineer
Western Area Power Administration
Lakewood, CO
Summary As a Civil Engineer, you'll will serve as engineering support in the functional areas of structural engineering, geotechnical engineering, cost estimating, or site development. This…
Added 1 hour ago
Civil Engineer
Bureau of Reclamation
Lakewood, CO
Added 1 hour ago
MI
Senior Cloud Systems Administrator
Maxar Intelligence I
Westminster, CO
- $109,000 to $167,000 USD / year
Added 1 hour ago
Software QA Engineer
Maxar Intelligence I
Colorado Springs, CO
Added 1 hour ago
Networks Systems Engineer III
Auria (Boecore LLC)
Colorado Springs, CO
Auria is looking to hire a Networks Systems Engineer III to support the Command, Control, Battle Management, and Communications(C2BMC) program. This role is onsite in Colorado Springs, CO.…
Added 1 hour ago
Software QA Engineer
Maxar Intelligence I
Colorado Springs, CO
Added 1 hour ago
IR Plume M&S System Engineer
deciBel Research, Inc.
Colorado Springs, CO
Added 1 hour ago
Software Engineer
deciBel Research, Inc.
Huntsville, AL

WARN INDUSTRIES INC

Design Engineer II

Clackamas, OR, United States

Apply About employer

Applications open in a new tab.

Job details

Working hours: 40 hours/week
Posting language: English

Original job description

Design Engineer II - Productivity and Sustainability

At WARN Industries, engineering is not just about designing a product. It is about figuring out how to build it better. We’re looking for a Design Engineer - Productivity and Sustainability who can turn engineering expertise into real, measurable improvements across our products and manufacturing operations. This role is focused on driving productivity, manufacturability, cost, quality, and sustainability through smart engineering solutions, process optimization, waste reduction, and responsible use of materials and resources. If you’re the kind of engineer who looks at a product or process and immediately starts thinking, “There’s a better way to do this,” this could be your kind of role.

What You'll Do

Drive improvements in productivity, manufacturability, cost, quality, and sustainability through effective engineering solutions.
Identify and implement opportunities to improve manufacturing productivity through process optimization, automation, tooling, equipment, workflow improvements, and elimination of non-value-added activities.
Develop and support measurable improvements in manufacturing capacity, labor efficiency, equipment utilization, material utilization, and process performance.
Apply continuous-improvement and data-driven problem-solving methods to establish baselines, identify opportunities, quantify improvements, and verify results.
Evaluate engineering solutions to reduce material usage, scrap, rework, energy consumption, and other forms of waste while maintaining product safety, quality, performance, and customer requirements.
Incorporate manufacturability, productivity, sustainability, total cost, and long-term operational impact into product and production-process design decisions.
Design and implement new or modified tooling, fixtures, machinery, manufacturing processes, and technologies.
Identify root causes of engineering and manufacturing problems and develop effective corrective actions.
Research, test, and evaluate products for design, performance, and failure modes.
Collaborate with engineering teams, manufacturing, suppliers, customers, and other WARN functional groups to bring improvements from concept to the shop floor.
Support multiple engineering projects and priorities in a fast-moving manufacturing environment.

What You'll Bring

Ability to identify, evaluate, and implement engineering solutions that improve productivity, manufacturing efficiency, and cost effectiveness.
Strong understanding of continuous improvement, waste reduction, process optimization, manufacturability, and data-driven problem solving.
Ability to incorporate practical sustainability considerations into engineering decisions, including material utilization, scrap reduction, energy/resource efficiency, manufacturability, and product lifecycle considerations.
Product design and development experience, preferably with high-volume consumer products.
Working knowledge of CAD, preferably NX and/or SolidWorks.
Working knowledge of engineering and quality tools including SPC, GD&T, FMEA, and DFA/M.
Working knowledge of FEA is preferred.
Familiarity with rapid prototyping techniques is preferred.
Strong analytical and problem-solving skills with the ability to take an improvement from an idea to a measurable result.
Ability to work both independently and collaboratively in an environment where engineering gets hands-on with manufacturing.

Required Education and Experience

Bachelor of Science in Mechanical Engineering, Manufacturing Engineering, or a related engineering discipline required.
Two or more years of professional experience.
Two or more years of hands-on engineering or product design experience required.
Two or more years of experience in a high-volume manufacturing environment preferred.

WHAT’S IN IT FOR ME (WIFM)?

Here’s what you can expect:

3 weeks Paid Time Off (PTO) – Because work-life balance matters.
Medical, Dental & Vision Insurance – Comprehensive coverage for you and your family.
Short-Term & Long-Term Disability – Support when life throws you a curveball.
401(k) Retirement Plan – With company match to help you build for the future.
Employee Assistance Program (EAP) – Resources for mental health, financial guidance, legal services, and more.
Employee Discounts – Save on all Warn Group products and gear through our employee purchase program.
Career Growth & Training – Keep building your skills, knowledge, and career.
A Team That Gets It Done – Work alongside people who take pride in what they build and have each other’s backs.

EQUAL EMPLOYMENT OPPORTUNITY

Warn Industries is a division of the Warn Group, and is an Equal Opportunity Employer. As an Equal Opportunity Employer, The Warn Group is committed to providing FMLA and equal opportunities for all applicants. The Warn Group recruits, hires, trains, and promotes team members in all job classifications without regard to age, race, color, marital status, religion, sex, gender, sexual orientation, national origin, disability, veteran status or any other status protected by law. For more information on FMLA, EEO and EPPA regulations, you can check out our career page located at www.warn.com. The Warn Group hires U.S. citizens and persons lawfully authorized to work in the U.S. All new employees must complete an INS Employment Eligibility Verification Form (I-9) and be able to provide verification of their status as a Non-Foreign person as defined by International Traffic in Arms Regulations, Section 120.14- 120.16. The Warn Group uses E-Verify for eligibility verification to work in the U.S. For more information on E-verify, you can visit www.e-verify.com.

Monday to Friday HYBRID - 3 days onsite, 2 days remote after initial training period 40 hours/week

Apply About employer

More about this job

Skills

Workflow
Process improvement
Problem solving
Production processes
Manufacturing processes
Research
Siemens NX
Dassault Systemes SolidWorks
SPC
FEA
Mechanical engineering
Disability care
Mental health

Report this job