Summary About the Position: Serves as a Civil Engineer that performs levee design work; reviews and coordinates work of other engineers; and, assists a Contracting Officer Representative (COR) on designated projects.
Management may select at any of the grade levels announced with non-competitive promotion potential to target grade (GS-12). Non-competitive promotion potential to the target grade will be based on time-in-grade requirements and demonstrated ability to perform the higher graded duties. Duties Develops design details required for major and extraordinarily difficult levee projects. | Reviews permits for structures to determine their effect on existing or proposed levee work. | Oversees the implementation of work assigned to the team. | Visits project sites to determine details of treatment for potential or actual problem areas; and, inspects proposed construction sites and work in progress to insure compliance with project requirements.
Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
- Current Department of Army Civilian Employees
- Interagency Career Transition Assistance Plan
- Land Management Workforce Flexibility Act
- Military Spouses, under Executive Order (E.O.) 13473
- Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
- Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
- Priority Placement Program, DoD Retained Grade Preference Eligible
- Veterans Employment Opportunity Act (VEOA) of 1998
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
- Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
- Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
GS-11 Specialized Experience: One year of specialized experience which includes:
- Assisting in the development of design details for civil engineering projects, such as levees or flood control structures.
- Visiting project sites to assess conditions, identify potential problems, and inspect work in progress to ensure it meets project requirements.
- Participating in team activities, providing input on technical matters, and coordinating with other teams and stakeholders to support project goals.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. (Note: You must attach a copy of your transcripts.)
GS-12 Specialized Experience: One year of specialized experience which includes:
- Coordinating all engineering input to ensure projects are delivered on time, within budget, and to quality standards.
- Planning and managing a team's daily activities, providing technical and administrative leadership, and being accountable for the team's performance.
- Representing the organization in technical committees, meetings with customers and partners, and providing expert advice on complex engineering matters.
- Preparing scopes of work for A-E contracts and serving as the primary technical contact with A-E firms.
. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted for GS-12.
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09 and/or GS-11).
You will be evaluated on the basis of your level of competency in the following areas:
- Civil Engineering Specialty
- Decision Making
- Quality Management
Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.How you will be evaluated As part of the assessment process, your resume will be evaluated using a competency-based method. This structured evaluation measures your qualifications, experience, and skills against the core competencies required for the position. Final scores will determine whether you are referred to the Hiring Manager for further consideration.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.
You may claim Military Spouse preference.
Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.
You may claim Priority Placement Program (PPP) preference.
DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.How to apply To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section below.
The complete application package must be submitted by 11:59 PM (EST) on 11/16/2026 to receive consideration.
- To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application (https://apply.usastaffing.gov/ViewQuestionnaire/13105919).
- Follow the prompts to select your resume and/or other supporting documents to be included with your application package. As a reminder, your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. For additional information, refer to the 'Required Documents' section.
- You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
- After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
- You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. Your resume selected in USAJOBS will be included, but you must re-select other documents from your USAJOBS account or your application may be incomplete.
- It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan.
- Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center.
To verify the status of your application, log into your USAJOBS account (https://www.usajobs.gov/applicant/profile/dashboard/), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://help.usajobs.gov/how-to/application/status. Other information
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
- Direct deposit of pay is required.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- All qualifications requirements must be met by the closing date of this announcement.
- Nepotism: Under the provisions of 5 USC 3110, an individual may not be appointed into a position if the position is under the supervisory chain of command of a relative.
- This position is Exempt from the Fair Labor Standards Act.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
- This is a(n) Engineers and Scientists Career Program position aligned under the Construction, Analysis, Science, Infrastructure & Engineers (CASIE) Career Management Directorate.
- Multiple positions may be filled from this announcement.
- Salary includes applicable locality pay or Local Market Supplement.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
