Jobs in the United States

25+ jobs

Save this search

Added just now
Warehouse Lead Cleaner
ABM US
Dallas, TX
We are looking for a reliable and experienced Lead to ensure all facility operations follow policies and procedures. They coordinate daily operations by delegating job assignments and…
Added just now
Lead Janitorial Cleaner
ABM US
Conyers, GA · Covington, GA
We are looking for a reliable and experienced Lead to ensure all facility operations follow policies and procedures. They coordinate daily operations by delegating job assignments and…
Added just now
Rental Car Driver
ABM US
DFW Airport, TX
Report incidents or claims to Operations Manager or Shift Lead
Added just now
Intake Manager / Trainer
Tort Experts
Remote, United States
We are seeking a highly technically proficient Intake Manager / Trainer with legal mass tort intake experience to train and develop intake advocates, coach performance, and support daily…
Added just now
AL/MC Sales Manager
Casa De Las Campanas
Port Charlotte, FL
Answers and directs incoming phone calls and manages the lead distribution system
Added 1 min ago
Pharmacy Manager - Store 16492
CVS Rx Services, Inc.
Niles, IL
As a Pharmacy Manager, you will lead and develop a pharmacy team that provides exceptional patient care by promoting best practices and leading through change while identifying and…
Added 1 min ago
Retail Keyholder (Store 7858)
Gamestop
East Rutherford, NJ
Check shipments for discrepancies or shortages and record any discrepancies in the POS system. Report any discrepancies to the Store Manager / Store Manager 2 /Assistant Store Manager as…
Added 1 min ago
G
Full Time Assistant Store Manager (Store 7858)
Gamestop
East Rutherford, NJ
- Full-time
…for each store associate into Workday / HR service management system in partnership with the Store…
Added 2 mins ago
Senior Release Manager
Agility Robotics
Remote, United States
As a Senior Release Manager at Agility Robotics, you'll own the end-to-end release process for our robot platform, ensuring seamless coordination across software, firmware, hardware, and…
Added 2 mins ago
Principal Electrical Engineering Section Leader
RTX
United States
As the Land & Shipboard Effector Guidance Systems Lead, you will provide both technical guidance and supervision in meeting project commitments. In this role you will work with Raytheon…
Added 2 mins ago
Corrections Lieutenant: River North Correctional Center #00142
Dept of Corr - Central Admin
Grayson, VA
…shift. Contributes to administration of performance management system for staff. Conducts ongoing inspections to maintain, security, sanitation and good order of the institution. Interacts…
Added 3 mins ago
Graduate Rolling Stock Engineer -2027
Mott MacDonald
Seattle, WA
As a participant in Blueprint, our new graduate program, you will embark on a structured three-year development journey designed in collaboration with an award-winning learning provider.…
Added 4 mins ago
Supply Chain Collaboration (SCC) Manager, Solutions Enablement
Ethicon Inc. Legal Entity
Remote, United States
The SCC Manager, Solutions Enablement is accountable for managing the global template for the Supply Chain Collaboration capability and driving ongoing supplier enablement/onboarding of…
Added 4 mins ago
Executive Oncology Sales Specialist, Hematology (Upper Midwest District) – Johnson & Johnson Innovative Medicine
Janssen Biotech, Inc. Legal Entity
Minneapolis, MN · Eau Claire, WI · Rochester, MN · St. Paul, MN · St Cloud, MN
The Executive Oncology Sales Specialist (OSS) is a Field Based role reporting to a District Manager. As the OSS you will:
Added 5 mins ago
Restaurant Manager
Olde Mecklenburg Brewery LLC
Charlotte, NC
The Restaurant Manager leads day-to-day Front of House operations at OMB’s Ballantyne location - guest experience, steps of service, FOH team leadership, the bar and beverage program, and…
Added 6 mins ago
oneRTX Process & Systems Transformation, Jira Program Operations Lead (Remote)
RTX
Remote, United States
Manager, Jira Program Operations Lead, oneRTX PST (Remote)
Added 6 mins ago
Sr. Operations Manager (onsite)
RTX
United States
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Added 6 mins ago
Senior Manager, Trusted Components R&D
RTX
United States
Collins Applied Research & Technology seeks a Senior Engineering Manager of Trusted Components R&D to lead a multi-disciplinary department of software, systems, cyber, and firmware…
Added 6 mins ago
SO
IT System Administration - Senior/Specialist (ServiceNow System Administrator )
State of Washington
Olympia, WA
- $94,620 to $127,248 USD / year
…authority for the ServiceNow platform, a foundational enterprise system supporting IT service delivery, workflow automation, business operations, and organizational efficiency across the…
Added 6 mins ago
SO
Community Reentry Services Manager (WMS1) - Spokane or Wenatchee
State of Washington
Spokane, WA
- $82,397 to $102,996 USD / year
Job Title: Community Reentry Services Manager – WMS1
Added 6 mins ago
SO
Mainframe Technical Support (IT System Admin – Journey)
State of Washington
Lacey, WA
- $7,508 to $10,098 USD / month
WSDOT is seeking a skilled and dependable Mainframe Technical Support System Administrator to serve as a key technical member of the Mainframe Technical Support team. This position will…
Added 6 mins ago
SO
Workday Project Coordinator
State of Washington
Olympia, WA
- $7,083.33 to $9,166.67 USD / month
The Workday System will serve as the state’s repository for enterprise-wide financial, procurement, budgeting, and human resources information and will support related business processes…
Added 6 mins ago
DIRECTOR - INFORMATION TECHNOLOGY
Signicast
Hartford, WI
Lead the IT strategy for the company, aligning technology initiatives with business goals and operational requirements.
Added 7 mins ago
Manager, Global Mobility Compliance
US: Mastercard International Incor
O'Fallon, MO · Purchase, NY
Mastercard is seeking a Manager, Global Mobility Compliance to lead the compliance infrastructure supporting employees working across jurisdictional boundaries. The scope includes domestic…
Added 8 mins ago
Manager, People Ops & Automation
Coinbase
Madison, WI
Team/ Role Paragraph: We're looking for an AI-forward operator to lead how our People Operations function runs, including the systems, signals, and service model that power the entire…

Stellantis

Vehicle Systems Launch Manager

Auburn Hills, MI, United States

Apply About employer

Applications open in a new tab.

Job details

Experience: Minimum of 10 years of experience
Posting language: English

Original job description

The BIW / Closures Vehicle System Launch Manager will provide hands-on technical and cross-functional leadership for the BIW and Closures throughout the program.

The Launch Manager is accountable for leading the cross-functional team to meet program timing while continuously improving build quality. This includes ensuring engineering readiness, part availability, manufacturing process readiness, dimensional convergence, welding and adhesive quality, and rapid resolution of issues affecting vehicle builds.

This is an ownership role, not an issue-tracking role. The VSR is expected to identify risks early, establish priorities, drive technical decisions, remove roadblocks, and remain engaged until issues are permanently resolved and the required build quality is consistently demonstrated.

The Launch Manager will work closely with the VPE Dimensional Team to drive dimensional convergence, repeatability, measurement strategy, root-cause analysis, and continuous improvement throughout the BIW / Closures program.

Key Responsibilities:

BIW / Closures Lead Leadership

Lead the BIW / Closures BIW and Closures cross-functional team through program execution and vehicle builds.
Serve as the Vehicle Engineering technical leader for BIW and Closures build execution.
Establish clear cross-functional priorities and drive Engineering, Manufacturing, Supplier Quality, suppliers, Dimensional, and supporting teams toward common program objectives.
Own resolution of build issues affecting BIW, Closures, body geometry, joining, fit, function, appearance, or manufacturing execution.
Drive the team from issue identification through containment, root cause, corrective action, validation, implementation, and effectiveness verification.
Challenge technical conclusions when data does not demonstrate true root cause.
Remove roadblocks and escalate barriers preventing timely technical resolution.
Maintain ownership until the solution is implemented and proven effective.

Program Timing & Build Execution

Lead cross-functional execution to meet BIW / Closures program timing and vehicle build milestones while improving build quality.
Ensure engineering deliverables, parts, tooling, manufacturing processes, dimensional activities, joining processes, and validation plans are ready to support each build phase.
Identify risks to upcoming builds early and drive recovery plans before they impact program timing.
Establish clear owners, deliverables, and timing for critical actions.
Drive timely resolution of engineering and manufacturing issues that threaten vehicle build execution.
Balance program timing with engineering rigor, ensuring schedule pressure does not result in accepting unresolved or recurring quality conditions.
Use each program build to drive measurable improvement in product and process quality.
Ensure unresolved issues have robust containment and a clearly defined path to permanent corrective action.
Drive issues to closure rather than carrying known problems from one build phase to the next.

Part Availability & Build Readiness

Ensure BIW and Closures parts are available to support planned vehicle builds.
Identify risks associated with part shortages, late components, nonconforming material, engineering changes, supplier readiness, or tooling conditions.
Work cross-functionally to ensure components arrive at the appropriate design level, quality level, and timing to support the build.
Drive rapid containment when necessary to protect the build while ensuring permanent corrective actions follow.
Ensure engineering changes are properly communicated, incorporated, and validated.
Prevent part availability or configuration issues from becoming repeated build disruptions.

Bodyshop Process & Build Quality

Own the engineering quality of the BIW and Closures build.
Partner with Manufacturing to ensure bodyshop processes consistently deliver the intended engineering requirements.
Drive resolution of issues involving BIW assembly, Closures assembly, welding and joining, weld integrity, adhesives, hemming, sealing interfaces, fixtures, tooling, assembly sequence, part interfaces, body geometry, fit and function, and dimensional stability.
Ensure manufacturing processes produce repeatable quality rather than relying on manual adjustment, repair, or rework to achieve an acceptable vehicle.
Drive continuous reduction of build adjustments, dimensional corrections, repairs, and recurring defects.

Dimensional Control & Continuous Improvement

Partner closely with the VPE Dimensional Team to drive BIW and Closures dimensional convergence throughout the BIW / Closures program.
Drive vehicle-level dimensional problem solving and ensure the organization understands the true contributors to variation.
Use dimensional and measurement data to distinguish part variation, tooling conditions, fixture conditions, joining processes, assembly process, measurement variation, and product design conditions.
Drive effective short-loop problem solving between the bodyshop, Engineering, Manufacturing, suppliers, and dimensional/metrology teams.
Ensure critical product characteristics are identified, measured, understood, and controlled.
Drive improvements in dimensional repeatability and process capability, not simply achievement of nominal dimensional targets.
Support correlation between measurement systems, fixtures, tooling, parts, subassemblies, BIW, and complete vehicle results.
Drive corrective actions when data demonstrates instability, excessive variation, or dimensional drift.
Ensure dimensional lessons learned are incorporated into product, tooling, and manufacturing process improvements.

Welding, Adhesive & Joining Quality

Ensure welding and joining processes meet engineering and manufacturing requirements.
Drive resolution of weld-quality issues, including assessment of process conditions, tooling, equipment, material interfaces, and product design.
Ensure appropriate weld validation and verification are completed.
Drive resolution of adhesive-related concerns including application, bead location, coverage, material condition, process execution, and design interfaces.
Work cross-functionally with Engineering and Manufacturing to ensure joining processes are capable, repeatable, and robust.
Ensure corrective actions address the underlying failure mechanism rather than relying on additional inspection or repair.

Basic Qualifications:

Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Automotive Engineering, Welding Engineering, or a related technical discipline.
Minimum of 10 years of experience
Strong automotive engineering or manufacturing experience, preferably involving BIW, Closure Systems, bodyshop operations, dimensional engineering, or vehicle launch.
Strong working knowledge of bodyshop manufacturing processes and assembly sequencing.
Demonstrated technical knowledge of BIW construction and assembly, closure systems, dimensional control, GD&T, measurement systems, weld processes and validation, adhesive and joining processes, BIW tooling and fixtures, dimensional variation and repeatability, and structured root-cause analysis.
Demonstrated ability to lead cross-functional technical teams in a fast-paced vehicle launch environment.
Strong problem-solving and decision-making skills.
Strong communication and leadership capability with the ability to establish priorities, drive accountability, and escalate when necessary.

Preferred Qualifications:

Previous vehicle launch experience in a BIW, Closures, Dimensional, Manufacturing, or Vehicle Engineering role.
Hands-on experience working in or supporting an automotive bodyshop.
Experience with resistance spot welding and weld-quality validation.
Knowledge of structural adhesives, hemming, sealing, and body assembly processes.
Experience with dimensional measurement systems such as CMM, laser scanning, and inline vision/measurement systems.
Understanding of SPC, process capability, dimensional variation, datum strategies, fixture/tooling validation, and measurement correlation.
Experience applying structured problem-solving methods such as 8D, 5-Why, Ishikawa/Fishbone, DMAIC, DOE, and statistical analysis.
Six Sigma Green Belt or Black Belt is a plus.
Demonstrated experience leading multi-disciplinary engineering and manufacturing teams

Apply About employer

Report this job