Jobs in the United States

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 1 min ago
Environmental Test Engineer
INSPYR Solutions
Long Beach, CA
Bachelor's degree in Electrical Engineering, Manufacturing Engineering, Aerospace Engineering, or a related field.
Added 1 min ago
Tooling Engineer
INSPYR Solutions
Long Beach, CA
Vast has multiple Tooling Engineer openings, reporting to the Senior Manager, Tooling, to support the development of the systems that will be required for the design and build of…
Added 4 mins ago
Principal/Sr Principal Facilities Electrical Engineer
SP - Propulsion Systems
United States
Northrop Grumman, Propulsion Systems, is currently seeking a Principal/Sr Principal Facilities Electrical Engineer to join our team. This position will be supporting the Propulsion Systems…
Added 4 mins ago
2027 Associate Electrical Engineer - Rocket Center WV
DS - MP - ABL - Rocket Center
United States
Be majoring in or having majored in Electrical Engineering
Added 4 mins ago
Mechanical Design Engineer / Principal Mechanical Design Engineer
CORP-Corporate Office
United States
Must have experience developing mechanical designs using tools such as CATIA V5, SolidWorks, NX, AutoCAD, or similar design software tools
Added 4 mins ago
Engineer Electronics – Manufacturing Engineering (RF) 2/3
CORP-Corporate Office
United States
Northrop Grumman Mission Systems is looking for you to join us as an Engineer Electronics – Manufacturing Engineering (RF) based on-site in Rolling Meadows, IL.
Added 4 mins ago
Systems Engineer / Principal Systems Engineer - Modeling & Simulation
CORP-Corporate Office
United States
Must have an active U.S
Added 4 mins ago
Modeling & Simulation Systems Engineer
CORP-Corporate Office
United States
BS degree in Mechanical, Electrical Engineering, Physics, or a STEM field with 2+ years of related experience, or MS degree or PhD in STEM field with 0 years of related experience
Added 4 mins ago
Principal/Sr. Principal Modeling & Simulation Systems Engineer
CORP-Corporate Office
United States
BS degree in Mechanical, Electrical Engineering, Physics, or a STEM field with 5+ years of related experience, MS degree in STEM field with 3+ years of related experience, or PhD in STEM…
Added 4 mins ago
Electronics Engineer - 3
SP - Launch Vehicles
United States
Bachelor’s Degree in electrical engineering or equivalent STEM discipline from an accredited university with 5 years of related test experience or an MS and 3 years experience.
Added 4 mins ago
2027 Associate Engineer Signature Management and Survivability / Engineer Signature Management and Survivability
Northrop Grumman
United States
Be majoring in or having majored in Aerospace Engineering, Materials Science and Engineering, Electrical Engineering, Mechanical Engineering, Applied Physics, or similar STEM degree.
Added 4 mins ago
Senior Software Engineer, AI Inference Asset Delivery Platform
Apple
Seattle, WA
Join the Apple Service Engineering (ASE) team and drive innovation that matters! The ASE team builds and provides systems and infrastructure that fuel Apple's services. As part of this…
Added 5 mins ago
Mechanical Engineer IV, Robotics
Applied Materials, Inc
Santa Clara, CA
As a Mechanical Engineer, you’ll leverage your strong foundation in physics, mathematics, and materials science to process and resolve mechanical problems, design and implement custom…
Added 5 mins ago
Technical Project/Program Management IV
Applied Materials, Inc
Santa Clara, CA
Technical Project/Program Management background for NPI semiconductor products or equipment (5 years of industry experience required)
Added 5 mins ago
New Product manufacturing Engineer II
Applied Materials, Inc
Austin, TX
Education: Bachelor's Degree in Electrical/Mechatronics Engineering
Added 5 mins ago
Junior Electrical Engineer
Amentum
McLean, VA
Must have the ability to obtain and maintain a Top Secret or higher U.S
Added 8 mins ago
A
Senior Systems Engineer
Actalent
Mukilteo, WA
- $135,000 to $160,000 USD / year
Job Title: Systems EngineerLocation: Mukilteo, WAJob DescriptionThe Systems Engineer provides program-level technical leadership to mature complex aerospace and defense products from…
Added 9 mins ago
GP
IGS Calibration Engineer
GE Precision Healthcare LLC
Remote, United States
- $60,000 to $90,000 USD / year
Must have and maintain a valid Driver's License
Added 14 mins ago
Applications Engineering, Sr Engineer
Synopsys
Sunnyvale, CA
Master's degree in Electrical Engineering or Computer Science, or Bachelor's degree in EE/CS with 2+ years of relevant experience as a circuit designer or CAD engineer
Added 14 mins ago
CC
Day Porter-Part time
CCSCO CCS Facility Services - Colorado, Inc.
Denver, CO
- Part-time
…the United States, providing expert janitorial and facility engineering services to thousands of commercial businesses with a deep bench of experienced cleaning and engineering…
Added 16 mins ago
Senior Quality Engineer
TS Conductor
Huntington Beach, CA
Bachelor’s degree in Quality, Mechanical, Industrial, Materials, or Electrical Engineering, or a related technical field
Added 19 mins ago
NA
Intern - Embedded Software Engineer (Spring 2027)
North Atlantic Industries, Inc
Bohemia, NY
- $17.5 to $27 USD / hour
Enrolled in a Computer Science, Software Engineering, Electrical Engineering, or related program.
Added 19 mins ago
H
Electrical Hardware Design Engineer for HP Workstations
HP
Fort Collins, CO
- $93,400 to $143,800 USD / year
…customer-focused organization seeking a motivated and talented electrical engineer with a passion for technology, teamwork, and creating the world’s most powerful Desktop Workstation…
Added 20 mins ago
Senior Mechanical Engineer
Houston, TX
The Senior Mechanical Engineer will lead the design, development, and optimization of mechanical systems and components to meet project requirements and industry standards. This role is…
Added 22 mins ago
Electrical Engineer III / IV – Spacecraft Programs
Quantum Space
CA · Denver, CO · Hawthorne, CA · 801 Thompson Ave. Suite 201 Rockville, MD
Engineer III: typically 7+ years of relevant spacecraft electrical engineering experience.

Skyeton Inc

RF Engineer

North Las Vegas, NV, United States

Apply on ats.rippling.com About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 12, 2026

Original job description

About Skyeton, Inc Skyeton is an aerospace and defense technology company focused on the design, production, and support of advanced unmanned aerial systems. At our growing Fayetteville, North Carolina operation, employees help establish and scale U.S.-based manufacturing capabilities that support demanding customer missions. Company Culture Skyeton combines the energy of a growing organization with the discipline required in aerospace manufacturing. We value teamwork, accountability, practical problem-solving, precise execution, and a willingness to improve. Our people make a difference, and every employee contributes directly to product quality, operational readiness, and customer success.

About the role The RF Engineer designs, integrates, tests, and supports radio-frequency systems for Skyeton unmanned aircraft systems (UAS), including airborne and ground-based communications, command and control, telemetry, and payload data links. The position translates mission requirements into reliable RF architectures, antenna installations, and verified system performance across intended operating environments. This role partners with Systems, Electrical, Embedded Software, Mechanical, Manufacturing, Quality, and Flight Operations teams throughout development, production, and sustainment. Success requires strong RF fundamentals, practical laboratory and field testing skills, disciplined documentation, and an understanding of how aircraft integration affects communication reliability. What you'll do · Develop RF system requirements, architectures, interface definitions, and verification plans for airborne radios, ground stations, antennas, and associated RF components. · Prepare and maintain link budgets addressing transmit power, receiver sensitivity, antenna gain and pattern, cable and connector losses, propagation, fade margin, interference, and mission geometry. · Select, evaluate, and integrate radios, modems, amplifiers, filters, low-noise amplifiers, duplexers, couplers, attenuators, RF switches, connectors, and coaxial cable assemblies. · Design and evaluate RF circuits or subsystems as assigned, including matching networks, filtering, gain distribution, impedance control, grounding, shielding, and power requirements. · Analyze antenna selection, placement, polarization, radiation patterns, isolation, and coverage; collaborate with Mechanical Engineering on mounting, radomes, routing, bonding, and environmental protection. · Evaluate RF coexistence and interference among aircraft radios, payloads, navigation equipment, electronics, and ground systems; identify desensitization, coupling, harmonics, and intermodulation issues. · Use RF simulation and analysis tools to assess circuit behavior, antenna performance, propagation, and integration tradeoffs; validate analytical results through measurement. · Perform laboratory characterization using spectrum analyzers, vector network analyzers, RF signal generators, power meters, oscilloscopes, and related equipment. · Measure and document parameters such as return loss, insertion loss, gain, noise figure, output power, occupied bandwidth, spurious emissions, receiver sensitivity, and applicable error-rate metrics. · Develop repeatable test procedures, fixtures, scripts, and acceptance criteria; maintain equipment calibration awareness and account for measurement uncertainty and test setup losses. · Plan and support ground and flight tests to evaluate range, coverage, link availability, latency, throughput, and system behavior under representative operating conditions. · Analyze RF logs and flight or field data; investigate intermittent link failures, interference, integration defects, and performance limitations using structured root-cause methods. · Coordinate with Software and Systems Engineering on radio configuration, diagnostics, network interfaces, data rates, and link monitoring or recovery behavior. · Support EMI/EMC and environmental qualification activities, including test planning, troubleshooting, corrective actions, and verification against applicable program requirements. · Coordinate with responsible compliance specialists on frequency use, spectrum authorization, equipment approvals, customer restrictions, and RF exposure controls before testing or deployment. · Create and maintain RF block diagrams, schematics where applicable, interface documents, bills of material, cable loss budgets, configurations, test reports, and engineering change records. · Partner with Manufacturing, Quality, and Supply Chain on supplier evaluation, incoming acceptance, production test methods, component substitutions, and field sustainment. · Participate in design and test-readiness reviews; communicate technical, schedule, cost, supply, and reliability risks with practical mitigation options. · Follow approved engineering, configuration control, safety, security, and information-protection processes; contribute lessons learned and perform other related duties as assigned.

Qualifications

· Bachelor’s degree in electrical engineering, RF engineering, telecommunications engineering, or a closely related technical discipline, or an equivalent combination of relevant technical education and experience. · Three or more years of relevant experience developing, integrating, or testing RF communications systems, antennas, radios, or related hardware. · Strong understanding of RF fundamentals, transmission lines, impedance matching, S-parameters, antennas, propagation, link budgets, noise, interference, and modulation concepts. · Hands-on experience using RF laboratory equipment and interpreting measurements to identify hardware and system performance issues. · Experience integrating RF components and antenna systems, including evaluation of cable losses, connector interfaces, grounding, shielding, and coexistence. · Ability to develop test plans, analyze results, document configurations, and communicate evidence-based technical recommendations. · Proficiency with relevant analysis or simulation tools and data analysis using MATLAB, Python, or comparable software. · Ability to read electrical schematics, RF block diagrams, mechanical installation drawings, and component specifications. · Strong communication, problem-solving, and collaboration skills, with the ability to manage priorities in a fast-moving engineering environment. · Ability to support laboratory, ground, and flight-test activities and travel to test sites, suppliers, or customer locations as required. Preferred Qualifications · Master’s degree in electrical engineering, electromagnetics, communications, or a related discipline. · Experience with UAS, avionics, airborne communications, telemetry, command and control, or long-range line-of-sight data links. · Experience with digital communications, software-defined radios, diversity techniques, mesh networks, or resilient communications in congested RF environments. · Experience with antenna simulation or RF circuit tools such as HFSS, CST, ADS, AWR, or comparable software. · Experience with RF PCB layout, impedance-controlled routing, RF connectors, RF front-end design, or radio module integration. · Experience supporting EMI/EMC or environmental testing using applicable DO-160, MIL-STD-461, or MIL-STD-810 requirements. · Experience with automated RF testing, antenna pattern measurements, over-the-air testing, or production RF acceptance testing. · Experience supporting aerospace or defense programs, export-controlled technical data, and formal engineering configuration management. Skills and Competencies RF system integration • Antennas and propagation • Link budget analysis • Laboratory measurement • Interference troubleshooting • Test data analysis • Technical documentation • Customer focus • Cross-functional collaboration

Benefits

· Competitive compensation commensurate with experience. · Paid Time Off (PTO) and a 401(k) plan with company match. · Company-paid employee medical coverage, plus dental and vision insurance, subject to plan terms. · Career growth opportunities within a growing aerospace organization supporting mission-critical unmanned aircraft systems. Work Environment Work is performed in office, electronics laboratory, manufacturing, hangar, ground-test, and flight-test environments as program needs require. Domestic and international travel may be required. Duties include computer work, detailed bench testing, handling electronic equipment, and working outdoors at test sites. Employees follow applicable ESD, FOD, RF exposure, electrical safety, aircraft safety, security, and PPE requirements. Essential functions may be performed with or without reasonable accommodation. Equal Opportunity Statement Skyeton is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other legally protected characteristic. Reasonable accommodations are available for qualified applicants and employees. This position may involve access to export-controlled items, technical data, or customer information. Employees must meet applicable access requirements. Any required background screening or customer or government clearance requirements will depend on the position’s assigned work.

Apply on ats.rippling.com About employer

Report this job

Work requirements

Jobs in the United States