Jobs in the United States

25+ jobs

Save this search

Added just now
Clinical Laboratory Technician
Labcorp
Johnson City, TN
Perform and document preventative maintenance and quality control procedures
Added 3 mins ago
CC
FT User Support Supervisor
Cochise College
Sierra Vista, AZ
- $27.84 to $31.73 USD / hour
…programs leading to a variety of workforce certificates and associate degrees. The college is accredited by the Higher Learning Commission and is a designated Hispanic-Serving Institution…
Added 6 mins ago
Quality Inspector
Vetco Gray, LLC
United States
The Quality Control Inspector performs receiving, in-process, assembly, testing, and final inspections of serviced equipment and newly assembled products. The role verifies conformity to…
Added 7 mins ago
S
Quality Assurance Worker
Staffmark
Miamisburg, OH
- $17 USD / hour
Strong attention to detail with the ability to identify defects and document inspection results accurately.
Added 8 mins ago
CC
Security Police Officer
Chenega Corporation
Charleston, SC
- Up to $26.73 USD / hour
…property, and assets through law enforcement support, access control, patrol operations, emergency response, and armed security activities in support of mission-critical government…
Added 8 mins ago
CC
Security Police Officer
Chenega Corporation
Charleston, SC
- Up to $26.73 USD / hour
…property, and assets through law enforcement support, access control, patrol operations, emergency response, and armed security activities in support of mission-critical government…
Added 10 mins ago
Data Center Safety Coordinator
Milestone Technologies, Inc.
Hubbard, TX, TX
As the dedicated safety coordinator, this role is expected to proactively identify and control hazards, lead pre-task safety planning, develop and reinforce job hazard analysis (JHA) and…
Added 12 mins ago
UB
Quality Control Associate I - Bioassay
USLA BioLegend, Inc.
United States
- $20 to $27 USD / hour
…support the research community for legendary discoveries. Quality Control Associates will test products such as antibodies and proteins in the following application(s): flow cytometry,…
Added 13 mins ago
FU
Manufacturing Engineering Technician
FERROTEC USA CORPORATION
Livermore, CA
- $29 to $32 USD / hour
Coordinate approved change implementation with Manufacturing Engineering, Document Control, Quality, Production, Planning, Purchasing, Inventory, and other stakeholders.
Added 14 mins ago
Genesys Cloud Access Management
Humana
Concord, NH
…user lifecycle administration, and platform governance. The associate is responsible for provisioning and deprovisioning user accounts, managing roles, permissions, groups, queues, and…
Added 15 mins ago
Sr Quality Engineer I
Kite Pharma, Inc.
CA
Provide quality oversight for change control activities related to validated computer systems, ensuring technical and quality impact assessments are performed in a compliant manner and…
Added 18 mins ago
Loan Quality Control Specialist
MyPoint Credit Union
San Diego, CA
We are looking for a detail-oriented Loan Quality Control Specialist to join our Real Estate/Consumer Lending team.
Added 19 mins ago
ES
Special Education Educational Assistant - Chavez Elementary School
Eugene School District 4J (dba Lane County School District) (OR)
Eugene, OR
- $23.63 to $29.65 USD / hour
Obtaining an associate's or higher degree (attach diploma) OR
Added 22 mins ago
AF
Senior AI System Architect
Accenture Flex LLC Company
United States
- $50 to $60 USD / hour
…Knowledge Bases, RAG solutions, Agent Frameworks, MCP integrations, document intelligence, structured data intelligence, model orchestration, and platform modernization…
Added 23 mins ago
Vacuum Chamber Technician B - 2nd Shift
GKN Aerospace Careers
Garden Grove, CA
Execute safe first response, troubleshooting, restoration, and escalation for vacuum chambers and associated mechanical, electrical, heating, cooling, pneumatic, and control systems.
Added 25 mins ago
UO
Instrumentation & Controls Technician
University of Virginia
Charlottesville, VA
- $28 to $32 USD / hour
…Automation Systems (BAS) services, delivering 24/7 support for HVAC control system failures, BAS network faults, and system alarms across research, healthcare, academic, and other…
Added 29 mins ago
(C
Physical Therapist Assistant(PTA) Per Diem
(Willow Creek Healthcare Center) Willow Creek Post Acute, LLC
United States
- $46 to $47 USD / hour
Observe and document residents’ responses to treatment, progress toward goals, and changes in condition.
Added 29 mins ago
Activity Security Representative (ASR) II
GD Information Technology, Inc.
United States
Maintain various daily logs for a variety of administrative functions associated with document control.
Added 33 mins ago
Production Technician (Starlink/Akoustis)
SpaceX
Bastrop, TX
Input data and monitor SPC control charts for processes and equipment and be able to follow corrective actions when violations occur
Added 39 mins ago
KG
Registered Nurse, MDU, Full-time Days
KPC GLOBAL MEDICAL CENTERS INC.
Menifee, CA
- Full-time
Monitor patient progress and document findings accurately in electronic medical records.
Added 39 mins ago
KG
Registered Nurse, MDU. Full-Time Days
KPC GLOBAL MEDICAL CENTERS INC.
Menifee, CA
- Full-time
Monitor patient progress and document findings accurately in electronic medical records.
Added 39 mins ago
KG
Registered Nurse Sub-Acute Fulltime/Nights 12 hrs. shifts
KPC GLOBAL MEDICAL CENTERS INC.
Hemet, CA
- Full-time
Monitor patient progress and document findings accurately in electronic medical records.
Added 41 mins ago
Insurance Client Coordinator
Compeer Financial
Janesville, WI
Reviews documents submitted from Crop Insurance Sales Team for accuracy and quality control ensuring they are Risk Management Agency (RMA), Approved Insurance Provider (AIP) and Compeer…
Added 41 mins ago
Cass Specialist
NORTHERN JET MANAGEMENT INC
Orlando, FL
Initiate, document, issue, and track Corrective Action Requests (CARs) resulting from CASS surveillance, maintenance trends, internal findings, or identified deficiencies.
Added 43 mins ago
CO
Engineer Technician/Senior Engineer Technician
City of De Pere
De Pere, WI
- $32.86 to $46.94 USD / hour
Conduct field investigations and surveys. Assist in establishing preliminary and design surveys to ensure project control and performance.

Skyeton, Inc

CNC Tech/Programmer

Fayetteville, NC, United States

Apply About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 2, 2026

Original job description

About Skyeton, Inc Skyeton is an aerospace and defense technology company focused on the design, production, and support of advanced unmanned aerial systems. At our growing Fayetteville, North Carolina operation, employees help establish and scale U.S.-based manufacturing capabilities that support demanding customer missions. Company Culture Skyeton combines the energy of a growing organization with the discipline required in aerospace manufacturing. We value teamwork, accountability, practical problem-solving, precise execution, and a willingness to improve. Our people make a difference, and every employee contributes directly to product quality, operational readiness, and customer success.

About the role The CNC Technician/Programmer develops and maintains CNC programs, sets up and operates machining equipment, proves out processes, and inspects precision components used in Skyeton unmanned aerial systems and related assemblies. Working from engineering drawings, models, specifications, and work instructions, this position converts manufacturing requirements into safe, efficient, and repeatable machining processes. The role partners closely with Manufacturing Engineering, Quality, Production, and other machinists to improve tooling, fixtures, cycle time, process capability, and part quality while maintaining configuration control, traceability, and accurate production documentation. What you'll do

Create, modify, optimize, and maintain CNC programs using approved CAM software, G-code, conversational controls, and company programming standards.
Program and support 3-axis, 4-axis, and multi-axis CNC milling and/or turning operations for prototype, low-rate initial production, and recurring production work.
Review engineering drawings, solid models, GD&T requirements, specifications, bills of material, and work instructions to determine machining strategy, tooling, workholding, inspection points, and process sequence.
Develop setup sheets, tool lists, operation instructions, program revision records, and other controlled manufacturing documentation needed for repeatable execution on the shop floor.
Safely prove out new or revised programs using simulation, dry runs, single-block operation, feed overrides, and controlled first-piece verification.
Operate CNC equipment as production needs require and monitor tool wear, chatter, dimensional drift, surface finish, cycle time, and other indicators of process performance.
Perform first-piece, in-process, and final inspections using calipers, micrometers, height gauges, bore gauges, indicators, thread gauges, and other approved measurement equipment.
Support first-article inspection, including accurate documentation of dimensional results and coordination with Quality on AS9102 or customer-specific requirements when applicable.
Design or support the development of fixtures, soft jaws, workholding, cutting-tool packages, and practical process improvements that improve safety, quality, throughput, and repeatability.
Identify and document nonconforming conditions, programming errors, unclear requirements, or process risks; stop work and coordinate resolution with Quality and Engineering when necessary.
Maintain program revision control, file integrity, backup practices, material and job traceability, tool-life records, labor reporting, travelers, and inspection documentation.
Troubleshoot machining, setup, tooling, and program issues using data and structured problem-solving methods; verify corrective actions before returning work to production.
Support preventive maintenance, coolant monitoring, machine checks, 5S, FOD prevention, lockout/tagout, PPE, and housekeeping requirements.
Train and assist machinists and production employees on approved programs, setups, tooling, inspection steps, and safe operating practices within the employee’s demonstrated qualifications.
Collaborate across Manufacturing Engineering, Design Engineering, Quality, Supply Chain, and Production to improve manufacturability, reduce setup and cycle time, and support changing program priorities.
Perform other related duties as assigned based on operational and program needs.

Qualifications

High school diploma or GED equivalent.
At least three years of CNC machining experience, including independent setup and operation in a production, prototype, toolroom, aerospace, automotive, medical-device, or similarly precise manufacturing environment.
Demonstrated experience creating or substantially modifying CNC programs using CAM software, G-code, or conversational programming.
Ability to read and interpret engineering drawings, dimensions, tolerances, surface-finish requirements, bills of material, and written work instructions.
Working knowledge of GD&T, machining fundamentals, cutting tools, workholding, speeds and feeds, tool offsets, and machine troubleshooting.
Ability to select machining strategies and safely prove out new or revised programs with limited supervision.
Experience inspecting precision parts using common metrology tools, including calipers, micrometers, indicators, height gauges, bore gauges, and thread gauges.
Ability to maintain accurate programming, production, inspection, and quality records in a controlled manufacturing environment.
Strong mathematical ability, mechanical aptitude, attention to detail, and commitment to safe work practices.
Effective communication and the ability to work collaboratively with machinists, engineers, Quality, and Production employees. Preferred Qualifications
Five or more years of CNC machining and programming experience involving close-tolerance or complex components.
Machining diploma, certificate, apprenticeship, or associate degree in machining technology, manufacturing technology, or a related field.
Aerospace or defense machining experience and familiarity with AS9100, AS9102 first-article inspection, configuration control, FOD prevention, and material traceability.
Experience programming 4-axis or 5-axis mills, live-tooling lathes, or multi-axis mill-turn equipment.
Experience with Powermill, Fusion 360, or comparable CAM software, including toolpath simulation and post-processor use.
Experience designing fixtures, soft jaws, workholding, or cutting-tool packages using CAD/CAM tools.
Experience machining aluminum, stainless steel, titanium, engineering plastics, and/or composite materials.
Experience with probing systems, coordinate measuring machines, statistical process control, or other advanced inspection methods.
Experience supporting prototype development, new-product introduction, and evolving designs under formal change control. Skills and Competencies Competency What Success Looks Like

CNC Programming Creates safe, accurate, efficient, and maintainable programs using approved methods and revision controls.

Precision Execution Maintains dimensional accuracy, surface finish, repeatable setups, and disciplined inspection practices.

Manufacturing Judgment Selects practical tooling, workholding, sequencing, speeds, feeds, and verification methods.

Problem Solving Uses data to identify causes of machining variation and implements verified corrective actions.

Ownership and Safety Protects people, equipment, materials, programs, documentation, and delivery commitments.

Teamwork and Communication Works constructively across Machining, Engineering, Quality, and Production and communicates risk candidly.

Benefits

Company-paid medical coverage for the employee.
Dental and vision insurance options.
401(k) retirement plan with company matching contributions.
Generous paid time off program and company holidays.
Opportunities to contribute to a growing U.S. aerospace manufacturing operation and expand technical skills. Work Environment
Regularly stand and walk for extended periods while programming, setting up, operating, or monitoring machining equipment.
Frequently reach, bend, grasp, and handle tools, fixtures, raw material, and finished components; maintain the visual acuity needed to evaluate dimensions, surface finish, and machine conditions, with or without reasonable accommodation.
Frequently lift and carry tools, fixtures, materials, or parts weighing up to 35 pounds and occasionally up to 50 pounds with assistance or appropriate lifting equipment, with or without reasonable accommodation.
Work primarily in a manufacturing environment with exposure to operating machinery, metal chips, cutting fluids, airborne particulates, vibration, and typical shop noise; required personal protective equipment must be worn.
May occasionally work overtime or adjusted schedules to support production, program, or machine-recovery requirements.
Travel is expected to be minimal but may be required based on business needs. Export Control and Security Requirements This position may require access to technology, technical data, or information controlled under U.S. export-control laws and regulations, including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). Employment is contingent upon the individual’s ability to obtain lawful access to such information. The position may also require the ability to satisfy customer, facility-access, and security requirements, including obtaining and maintaining a security clearance when required by a contract or customer. Equal Opportunity Statement Skyeton Inc. is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable law. Skyeton provides reasonable accommodations to qualified individuals with disabilities and for sincerely held religious practices as required by law.

Apply About employer

Report this job