Find work in the United States.

A simpler way to find your next job.

Jobs in the United States

25+ jobs

Save this search

Added 2 days ago
RC
Electronics Test Technician *4th Shift*
RTX Corporation
andover, MA
- $32.77 USD / hour
Machine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic,…
Added 7 days ago
BC
Machine Operator - Part Time
Bachmann Chemical and Engineering
Clifton Park Center, NY
- $20 USD / hour
- Part-time
…well-qualified individual to join our talented team as our Machine Operator. Based out of our Clifton Park, New York location, you will be expected to follow Standard Operating procedures…
Added 7 days ago
Farmworker: Diversified (45-2092.00)
Cody's Machine Shop
HOT SPRINGS, AR
Added 8 days ago
1st Shift Production Operator
Pyrotechnique by Grucci
Radford, VA
…includes but is not limited to primer press, hot glue gun, potting machine, epoxy applicator, taping machines and auto-weighing system. 5. Perform inspection of components and follow…
Added 8 days ago
DC
Machine Operator - Part Time
Dymax Corporation
Clifton Park Center, NY
- $20 USD / hour
- Part-time
…well-qualified individual to join our talented team as our Machine Operator. Based out of our Clifton Park, New York location, you will be expected to follow Standard Operating procedures…
Added 8 days ago
Process and Equipment Engineer
RSM Electron Power, Inc.
HAUPPAUGE, NY
Added 8 days ago
UD
Machine Operator - 2nd Shift
USA Donaldson Company Inc.
Dixon, IL
- $21.35 USD / hour
The Machine Operator position is located in Dixon, IL will be responsible for producing pleated media within specifications and supply that media to assemble into filters. Hours are Monday…
Added 8 days ago
PROCESS ASSOCIATE 3 (Evenings)
EaglePicher Technologies LLC
Pittsburg, KS
Added 9 days ago
Process Associate 3 - Evening Shift
EaglePicher Technologies
Pittsburg, KS
Ability to use general office equipment (fax machine, copier, calculator, phones, etc.).
Added 12 days ago
1st Shift Production Operator
Pyrotechnique by Grucci
Radford, VA
…includes but is not limited to primer press, hot glue gun, potting machine, epoxy applicator, taping machines and auto-weighing…
Added 12 days ago
Process and Equipment Engineer
RSM Electron Power, Inc.
HAUPPAUGE, NY
Added 12 days ago
PROCESS ASSOCIATE 3 (Evenings)
EaglePicher Technologies LLC
Pittsburg, KS
Ability to use general office equipment (fax machine, copier,
Added 13 days ago
S
Machine Operator
Staffmark
Rainsville, AL
- $15 to $17 USD / hour
Total Talent Solutions – Now hiring for a Machine Operator
Added 13 days ago
V
Machine Operator - Manchester
VOLT
MANCHESTER, CT
- $18 USD / hour
Volt is immediately hiring for Machine Operators in Manchester, CT.
Added 13 days ago
MI
Production Operator
Moog Inc
Murphy, NC
- $16 to $20 USD / hour
Onsite – Murphy, NCTo be considered for a Production Operator role, here’s what you’ll need to bring with you:
Added 14 days ago
PB
2nd Shift Production Operator - Radford, VA
Pyrotechnique by Grucci, Inc.
Radford, VA
- From $19 USD / hour
…includes but is not limited to primer press, hot glue gun, potting machine, epoxy applicator, taping machines and auto-weighing…
Added 14 days ago
PB
1st Shift Production Operator - Radford, VA
Pyrotechnique by Grucci, Inc.
Radford, VA
- From $19 USD / hour
…includes but is not limited to primer press, hot glue gun, potting machine, epoxy applicator, taping machines and auto-weighing…
Added 14 days ago
PB
1st Shift Production Operator - Radford, VA
Pyrotechnique by Grucci, Inc.
Radford, VA
- From $19 USD / hour
…includes but is not limited to primer press, hot glue gun, potting machine, epoxy applicator, taping machines and auto-weighing…
Added 15 days ago
Process Associate 3
EaglePicher Technologies
Pittsburg, KS
Ability to use general office equipment (fax machine, copier, calculator, phones, etc.).
Added 16 days ago
SSM Machine Operator
Tempe, AZ
We are seeking a SSM (Selective Soldering Machine) Operator responsible for operating, monitoring, and maintaining machinery and related processes to ensure printed circuit boards are…
Added 17 days ago
U
Production Operator 2 - Conformal Coating (Swing Shift)
Unigen
Newark, CA
- $18 to $26 USD / hour
Job Title: Production Operator 2 - Conformal Coating (Temp to Hire- Swing Shift)
Added 17 days ago
U
Production Operator 1 - Conformal Coating (Swing Shift)
Unigen
Newark, CA
- $18 to $26 USD / hour
Job Title: Production Operator 1 - Conformal Coating (Temp to Hire- Swing Shift)
Added 18 days ago
R
Electronics Test Technician - 1st Shift
RTX
United States
- $32.77 USD / hour
Machine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic,…
Added 18 days ago
R
Electronics Test Technician - 2nd Shift
RTX
United States
- $32.77 USD / hour
Machine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic,…
Added 18 days ago
R
Electronics Test Technician - 3rd Shift
RTX
United States
- $32.77 USD / hour
Machine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic,…

RTX

Electronics Test Technician - 3rd Shift

United States

$32.77 USD / hour

Apply About employer

Applications open in a new tab.

Job details

Pay: $32.77 USD / hour
Experience: 1 - 2 years of specialized electronics education OR minimum of 2 years of experience in both electronics test and troubleshooting.
Posting language: English
Posted: Oct 6, 2026

Original job description

Date Posted:

2026-10-06

Country:

United States of America

Location:

US-MA-ANDOVER-AN1 ~ 350 Lowell St ~ AN1 ESSEX BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

Job Description

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Electronics Test Technician performs moderately complex testing, troubleshooting and acceptance of production, deliverable material on pre-production and development systems, infrared devices, lowest replaceable unit, circuit cards, subs, final assemblies and components.

*Starting Wage: $32.77*

*3rd Shift – 10:00pm - 6:00am - Andover, Massachusetts. This is an onsite role.*

**Must be able to successfully pass a Technical Interview**

What you will do:

As required, works with engineering personnel with normal levels of support and supervision.
Works to prints, sketches, schematics, specifications, process sheets, and outlines.
Utilizes diversified test and measurement equipment and supports multiple setups simultaneously.
May work under environmental extremes.
Working with verbal, written, video or computer-based procedures and a knowledge of electronic theory, acquires, transports, and sets up test equipment and test conditions.
Applies knowledge of electronic theory, diagnostic aids, specifications, and manuals to isolate failures in both the unit under test and associated test equipment to lowest replaceable unit or component.
May perform rework, inspection and re-inspection incidental to test and as required, to return defective unit under test to operational condition in compliance with specification.
Transports equipment, hardware and repair material between work departments as required.
Loads and unloads UUT’s (units under test) using cranes, hoists, and lifts and other mechanical lifting devises
Maintains associated peripheral equipment, tools and fixtures incidental to test process in proper operating condition and in accordance with general housekeeping guidelines.
Performs inspection of material utilizing test equipment, hand tools and other mechanical tools.
Performs all marking, stenciling, and painting as required by process.
Fabricates special-purpose jigs, fixtures, and adapters.
Performs daily/weekly test station calibrations as required.
Tunes and pots RF modules.
Performs DITMCO continuity testing and troubleshooting across all product types, including sub-assemblies and deliverable assemblies
Identifies deficiencies and makes suggestions to improve product reliability and quality.
Performs all duties contained in Test Operator C classification as directed.
Performs general maintenance and housekeeping of workplace, tools and equipment.
Maintains records, moves materials and follows safety rules in performance of duties.
Performs other similar duties as required or directed.
Machine, Tools and Equipment used but not limited to: Computer terminals/programs, microscopes/magnifiers, various automatic, semiautomatic and manual electronic, mechanical, hydraulic, vibration, and environmental test/measurement/diagnostic equipment, soldering, potting equipment, solvents, chemicals, fixtures, common hand tools, ladders, staging, hoists, gauges, power equipment, and other tools and equipment of the trade.

Qualifications You Must Have:

High School Diploma or equivalent (GED).
1 - 2 years of specialized electronics education OR minimum of 2 years of experience in both electronics test and troubleshooting.

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Please consider the following role type definitions as you apply for this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position is part of a collective bargaining agreement. Wage and workplace conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm

The hourly rate for this role is $32.77. The salary provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.

#FAIT

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.

Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.

This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.

RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Apply About employer

More about this job

Skills

Troubleshooting
Inspection
Regulatory compliance
Housekeeping
Mechanical tools
Painting
C

Report this job