Find work in the United States.

A simpler way to find your next job.

Jobs in the United States

25+ jobs

Save this search

Added just now
Alteryx Engineer
Stefanini Group
Richmond, VA
…across an integrated, cloud-based environment. The Alteryx Engineer is responsible for the full lifecycle of analytics automation and data integration solutions, including requirements…
Added 7 mins ago
Manufacturing Engineer l
ROUSH
Livonia, MI
Experience in advanced manufacturing (robotics, moderate volume automation, programmable logic controllers (PLC Controls)
Added 9 mins ago
Alteryx Engineer
Stefanini Group
Richmond, VA
…across an integrated, cloud-based environment. The Alteryx Engineer is responsible for the full lifecycle of analytics automation and data integration solutions, including requirements…
Added 9 mins ago
Alteryx Engineer
Stefanini Group
Richmond, VA
…across an integrated, cloud-based environment. The Alteryx Engineer is responsible for the full lifecycle of analytics automation and data integration solutions, including requirements…
Added 10 mins ago
Senior Network IT/OT Engineer
E Tech Group
Plano, TX
We’re adding to our team! We are seeking a Senior Network IT/OT Engineer to perform all aspects of process automation network engineering and integration, including initial concepts,…
Added 11 mins ago
Senior Databricks Data Engineer
Securiport
Reston, VA
…analysis, certification, and compliance. The Senior Databricks Data Engineer will lead the design, development, and optimization of data pipelines and data platforms within a…
Added 14 mins ago
A
Controls Engineer
Actalent
Atlanta, GA
- $30 to $55 USD / hour
Job Title: Controls EngineerJob DescriptionThe Controls Engineer designs and develops PLC programs for material handling and warehouse automation equipment. This role participates in all…
Added 14 mins ago
A
Control Systems Engineer
Actalent
Omaha, NE
- $80,000 to $110,000 USD / year
We are seeking a Control Systems Engineer to support the design, development, and implementation of advanced electrical control systems for custom mobile equipment. This role combines…
Added 19 mins ago
Lead Data Engineer
JPMC page
Irvine, CA
As a Lead Data Engineer at JPMorganChase within the Commercial & Investment Healthcare Payments team, you are an integral part of an agile team that works to enhance, build, and deliver…
Added 20 mins ago
Staff Electrical Engineer
Red Cell Partners
Remote, United States
Dash 2 Dynamics (D2) is seeking a Staff Electrical Engineer to lead mixed-signal electrical design for the electronics that enable our plasma-enhanced antenna and communications systems.…
Added 32 mins ago
Staff Software Engineer, Simulation
Agility Robotics
Remote, United States
…years of proven deployment data, we're pioneering a new era of automation that enhances human…
Added 37 mins ago
OT Network Engineer
SpaceX
College Station, TX
SpaceX is looking for an Operational Technology (OT) Network Engineer with experience in routing, switching, and wireless in industrial network environments. This employee will be a member…
Added 39 mins ago
A
Senior Site Reliability Engineer
AbbVie
Remote, United States
- $96,500 to $183,500 USD / year
AbbVie Information Security is looking for a highly motivated, diligent, and skillful Site Reliability Engineer to join the Cyber Security Engineering (CSE) Team. The CSE Team, working…
Added 44 mins ago
Manufacturing Engineer – Robotic Systems
Berkshire Grey
Bedford, MA
We are seeking a Manufacturing Engineer to support the production of complex robotic and automation systems. This role bridges engineering and manufacturing, focusing on designing,…
Added 48 mins ago
A
Sterile Construction Project Manager
Actalent
King of Prussia, PA
- $65 to $95 USD / hour
Ensure each RFI is complete, routed to the appropriate engineer, and answered within the agreed response time.
Added 48 mins ago
A
Automation Engineer
Actalent
Reading, PA
- $90,000 to $100,000 USD / year
Provide continuous improvement of MES and Industrial Automation Controls.
Added 48 mins ago
A
Mechanical Engineer
Actalent
Wyomissing, PA
- $30 to $40 USD / hour
Familiarity with Building Automation Systems (BAS/BMS) and controls integration.
Added 48 mins ago
A
Controls Engineer
Actalent
Sterling, VA
- $39.42 to $50 USD / hour
Commission and validate automation/control systems
Added 48 mins ago
A
Controls Engineer (Expert)
Actalent
Shelbyville, IN
- $48.08 to $57.69 USD / hour
Job Title: Controls EngineerJob DescriptionThis Controls Engineer role focuses on designing, programming, and commissioning automated control systems within a high-volume automotive glass…
Added 48 mins ago
A
Electrical Engineer
Actalent
Riverdale, IA
- $75,000 to $120,000 USD / year
Electrical EngineerJob DescriptionThe Electrical Engineer provides critical electrical engineering support to the maintenance, production, and engineering teams to safely meet business…
Added 48 mins ago
S
Cyber Security Engineer SME
SOSi
Washington, DC
- $119,803 to $248,822 USD / year
SOSI is seeking a Senior Cybersecurity Engineer to serve as a technical subject matter expert supporting an enterprise cyber defense program for a federal customer. This senior, highly…
Added 48 mins ago
Principal Engineer, MEP & Building Systems
Anduril Industries
Costa Mesa, CA
…process piping layouts, fire protection approaches, and building automation and controls…
Added 49 mins ago
Security Automation Engineer II, BU Info Security
Boston University
Boston, MA
…University to define, implement, and evaluate security risks and controls, and to make sure what we build matches our enterprise architecture standards and Information Security policy.…
Added 54 mins ago
Automation & Controls Engineer (Mandarin)
Smithfield
Sioux Falls, SD
Join Our Team as an Automation and Controls Engineer – Innovate the Future of Manufacturing!
Added 56 mins ago
Staff DevSecOps Engineer
Legion Intelligence
Remote, United States
As a Staff DevSecOps Engineer on the Mission Engineering team, which also owns Platform DevOps, you will provide technical leadership across internal build and release systems, platform…

Red Cell Partners

Staff Electrical Engineer

Remote, United States

Salary Range: $150,000-$175,000.

Apply About employer

Applications open in a new tab.

Job details

Pay: Salary Range: $150,000-$175,000.
Posting language: English
Posted: Nov 9, 2026

Original job description

About Us

Red Cell Partners is an incubation firm building and investing in rapidly scalable technology-led companies that are bringing revolutionary advancements to market in three distinct practice areas: healthcare, cyber, and national security. United by a shared sense of duty and deep belief in the power of innovation, Red Cell is developing powerful tools and solutions to address our Nation’s most pressing problems.

About Dash 2 Dynamics (D2)

D2 is building a new class of advanced communications systems powered by the integration of plasma physics, radio-frequency engineering, and novel antenna architectures. Our work is aimed at overcoming fundamental limits in conventional antennas and enabling communications capabilities that are smaller, more wideband, and more resilient in demanding environments. We are taking breakthrough technology from the laboratory through rapid prototyping, rigorous modeling and test, product qualification, and operational deployment.

This is an opportunity to join a hands-on, multidisciplinary team working at the edge of electromagnetics, materials, electronics, plasma science, and mission-focused product development. The systems we are developing will reshape how defense, aerospace, and commercial users communicate across contested and congested RF environments.

About the Role

Dash 2 Dynamics (D2) is seeking a Staff Electrical Engineer to lead mixed-signal electrical design for the electronics that enable our plasma-enhanced antenna and communications systems. You will own designs from schematic capture through PCB layout, with an emphasis on the digital, control, sensing, and power circuitry that surrounds the RF chain, and help shape the build strategy that takes hardware from benchtop prototypes to qualification-ready units. Working hand-in-hand with our RF subject matter expert, you will also run integration and test: bringing up boards, verifying performance, and closing the loop between design intent and measured system behavior.

What You Will Do

Electrical Architecture & Technical Leadership

Architect a new kind of radio front end. Define the mixed-signal backbone (digital control, embedded interfaces, sensing, data conversion, and power) that turns a plasma-enabled aperture into a controllable, field-ready communications system.
Set the technical bar. As the senior electrical voice on a small, fast-moving team, lead design reviews, mentor engineers, and partner with our RF subject matter expert to draw clean digital/RF boundaries that scale across bands, operating modes, and product variants.

Circuit & Hardware Development

Design the electronics that put plasma under command. Build microcontroller- and FPGA-based control, data converters, precision sensing, and the drive and bias circuitry that ignites, sustains, and modulates the plasma elements at the heart of our antennas.
Own your boards end to end. Take designs from schematic capture through PCB layout, designing in signal and power integrity, thermal margin, and testability while engineering out noise coupling, EMI, arcing, parasitics, and transient stress.

Prototype, Test & Troubleshooting

Be first to see new hardware come alive. Bring up and debug first-of-their-kind prototypes with oscilloscopes, logic analyzers, and automated data capture, chasing root cause across electrical, plasma, and electromechanical behavior.
Run the integration and test campaigns that prove it works. Plan and execute tests that retire the biggest technical risks, correlating circuit models and bench data with plasma, thermal, and RF performance alongside our RF lead.

Integration, Qualification & Transition

Shape how D2 builds hardware. Help define fabrication and assembly approach, prototype build sequencing, design verification, and configuration control as breakthrough technology moves from the lab bench toward qualification.
Carry it across the finish line. Work with mechanical, software, and systems engineers and with PCB, component, and test partners, designing for EMC (e.g., MIL-STD-461) and defense qualification on the path to repeatable production.

Qualifications

Required

Degree in Electrical Engineering or a closely related field, or an equivalent combination of education, training, and directly relevant experience, with typically 6–10+ years of relevant engineering work that demonstrates technical ownership of complex, cross-disciplinary mixed-signal systems, from architecture and interface trade-offs through schematic capture, layout, bring-up, integration, and verification.
Demonstrated expertise designing, laying out, building, and debugging printed circuit boards, with proficiency in a professional schematic and PCB environment such as Altium Designer, KiCad, or OrCAD.
Strong fundamentals in mixed-signal and digital design, including microcontroller or FPGA interfaces, data converters, serial buses, power electronics, controls, instrumentation, signal integrity, and power integrity.
Hands-on proficiency with oscilloscopes, logic analyzers, signal generators, power supplies, electronic loads, probes, and safe laboratory practices.
Demonstrated ability to lead design reviews, mentor engineers, communicate technical risk, and make sound decisions with incomplete information.
Ability to meet requirements associated with work on U.S. government and national-security programs.

Nice to Have

Familiarity with RF power amplifiers, impedance matching, high-voltage supplies, pulsed-power circuits, plasma systems, or electrically small antennas, sufficient to work effectively with RF specialists.
Experience with FPGA or embedded firmware development, or close collaboration with firmware engineers on hardware/software bring-up.
Familiarity with electromagnetic compatibility practices and standards such as MIL-STD-461.
Experience with embedded control, data acquisition, automation scripts, or software-defined radio interfaces.
Experience supporting design verification, environmental qualification, SBIR/STTR programs, or defense product development.
Active U.S. security clearance or eligibility to obtain one.

Salary Range: $150,000-$175,000. This represents the typical salary range for this position based on experience, skills, and other factors.

Our Red Cell Partners Benefits (may differ for each incubation):

For full-time roles

Career track opportunity with potential for rapid advancement with strong performance as the firm grows
100% employer paid, comprehensive health care including medical, dental, and vision for you and your family.
Paid maternity and paternity for 14 weeks at employees' normal pay.
Unlimited PTO, with management approval.
Opportunities for professional development and continued learning.
Optional 401K, FSA, and equity incentives available.
Mental health benefits are available through Tara Mind.
Cost effective GLP-1 solutions available through Crux.

We’re an Equal Opportunity Employer: You’ll receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability.

Applicant Data Disclosure

By submitting an application, you acknowledge that Red Cell Partners, LLC ("Red Cell") uses third-party service providers to facilitate its recruitment and hiring processes. These providers include applicant tracking systems, candidate verification platforms, and fraud detection tools (collectively, "Hiring Platforms"). Your application materials, including your résumé, cover letter, work samples, responses to application questions, and any other information you submit, may be transmitted to and processed by these Hiring Platforms for the following purposes:

Managing and administering your application throughout the hiring process;
Verifying the accuracy and authenticity of application materials, including by cross-referencing information you provide against publicly available sources and proprietary databases;
Identifying indicators of potentially fraudulent, fabricated, or materially misleading application content, including but not limited to discrepancies between submitted materials and publicly available professional profiles, geographic anomalies, and fabricated work histories.

Applications that are flagged through this process as containing indicators of fraud or material misrepresentation may be declined from further consideration. If you have questions about the status of your application or the evaluation process, please contact talent@redcellpartners.com.

Red Cell requires its Hiring Platform providers to process your information solely for the purposes described above and in accordance with applicable law. Your information will be retained only for as long as necessary to fulfill these purposes and any applicable legal obligations, after which it will be deleted in accordance with Red Cell's data retention policies.

For more information about how your data is used, please refer to our Privacy Policy and Applicant Privacy Notice.

Apply About employer

More about this job

Skills

Printed circuit boards
Leadership
EMI
Troubleshooting
Assembly
Electrical engineering
Debugging
Altium Designer
KiCad
Power electronics
Firmware
Collaboration

Report this job