Find work in the United States.

A simpler way to find your next job.

Jobs in the United States

25+ jobs

Save this search

Added 3 mins ago
N
Summer 2027 Internship Program: Analytics, Safety & Compliance - Melville, NY
natgridProd
Melville, NY
- $22 to $36 USD / hour
…validate operational data, identify trends and discrepancies, support compliance testing activities, and help track findings and remediation actions. You'll use tools such as Excel and…
Added 3 mins ago
Graduate Development Program, Associate Project Manager, New York Electric Major Projects
natgridProd
Syracuse, NY
…Manager on the New York Electric Major Projects team, you’ll support complex capital construction projects from early planning through construction to final closeout. In this role, you’ll…
Added 10 mins ago
Process Engineer
PRETIUM
Aurora, IL
…equipment troubleshooting, and new-product or new-mold launch support. The remaining approximately 20% applies structured continuous improvement methods to prioritize technical losses, lead…
Added 53 mins ago
PF
Process Engineer
Perdue Farms, Inc.
Bainbridge, PA
- $89,000 to $133,000 USD / year
…Engineer, you will provide technical expertise to improve safety, reliability, efficiency, production yields, product quality, and overall plant performance. You will partner closely with…
Added 53 mins ago
Regional Design Supervisor
PPL Corporation
Allentown, PA
…Regularly ranking among the country’s best utility companies for reliability and customer satisfaction, PPL Electric has won numerous awards, including 30 J.D. Power Awards for providing…
Added 1 hour ago
Senior Principal, Product Manager - Data Center and AI Networking Hardware Architecture
Hewlett Packard Enterprise
Sunnyvale, CA
Lead fact-based trade-off analyses across customer value, performance, power, density, reliability, serviceability, manufacturability, cost, ecosystem readiness, supply availability, and…
Added 1 hour ago
J
Head of Platform & Infrastructure Engineering
Jobgether
Remote, United States
- $340,000 to $400,000 USD / year
…Platform & Infrastructure Engineering, ensuring the performance, reliability, and scalability of a rapidly growing technology platform. In this strategic role, you will define the long-term…
Added 2 hours ago
C-
Principal Software Engineer - Full Stack
CVector - Industrial AI
Remote, United States
- $150,000 to $175,000 USD / year
Industrial facilities make decisions every minute that determine cost, reliability, and margin, but the signals that matter live in different worlds: live asset constraints and process…
Added 2 hours ago
C-
Senior Software Engineer - Backend & AI Infra
CVector - Industrial AI
Remote, United States
- $125,000 to $150,000 USD / year
Industrial facilities make decisions every minute that determine cost, reliability, and margin, but the signals that matter live in different worlds: live asset constraints and process…
Added 2 hours ago
C-
Senior Software Engineer - Full Stack
CVector - Industrial AI
Remote, United States
- $125,000 to $150,000 USD / year
Ensure system reliability and maintainability through automated unit, integration, and end-to-end testing
Added 2 hours ago
A
Principal Software Engineering - Reliability and FinOps Engineer
AT&T
Middletown, NJ
- $155,400 to $261,100 USD / year
As a Principal System Engineer, you will serve as a senior technical leader across FinOps, cloud optimization, system reliability, and AI-driven automation. You will shape and execute…
Added 2 hours ago
SAP Inventory to Delivery Lead
Moderna Services, Inc.
Princeton, NJ
Moderna is seeking a SAP Inventory-to-Delivery Lead to design, scale, and support global logistics execution, inventory movement, 3PL integration, warehouse connectivity, cold chain…
Added 2 hours ago
Executive Assistant Leadership
Jersey Central Power & Light Company
Morristown, NJ
Complete a broad variety of administrative tasks that facilitate the senior leader's ability to effectively lead the organization, including collecting and preparing information for…
Added 2 hours ago
Forward Deployed Engineer - (East coast based)
CrewAI
Remote, United States
Lead the technical integration of CrewAI's products into customers’ systems, including API integrations, data pipelines, and custom workflows.
Added 3 hours ago
CI
Senior Medical Device Research and Development Engineer
Cresilon, Inc.
Brooklyn, NY
- $100,000 to $160,000 USD / year
Ensure that all design activities adhere to FDA Quality System Regulations and ISO 13485 design control and risk management requirements. Lead material/design/process changes through a…
Added 3 hours ago
C
Senior DevSecOps Engineer
Credence
Remote, United States
- $150,000 to $180,000 USD / year
Operational Support & On-Call: Provide operational leadership during production incidents, outages, and high-priority events. Participate in an on-call rotation as required, ensuring timely…
Added 3 hours ago
C
Senior AI Software Engineer
Credence
Rome, NY
- $155,000 to $200,000 USD / year
Lead the design, development, prototyping, and refinement of AI-powered capabilities using generative AI, large language models, retrieval patterns, prompt/context engineering, and secure…
Added 3 hours ago
C
Senior AI Software Engineer
Credence
Warner Robins, GA
- $155,000 to $200,000 USD / year
Lead the design, development, prototyping, and refinement of AI-powered capabilities using generative AI, large language models, retrieval patterns, prompt/context engineering, and secure…
Added 3 hours ago
C
Senior AI Software Engineer
Credence
Wright-Patterson Air Force Base, OH
- $155,000 to $200,000 USD / year
Lead the design, development, prototyping, and refinement of AI-powered capabilities using generative AI, large language models, retrieval patterns, prompt/context engineering, and secure…
Added 3 hours ago
C
Senior AI Software Engineer
Credence
Boston, MA
- $155,000 to $200,000 USD / year
Lead the design, development, prototyping, and refinement of AI-powered capabilities using generative AI, large language models, retrieval patterns, prompt/context engineering, and secure…
Added 3 hours ago
Shift Manager - AI Company
Allied Universal
San Francisco, CA
Lead and mentor a team of site/shift supervisors by providing coaching, support, and recognition, while fostering accountability; encourage a collaborative and inclusive work environment to…
Added 3 hours ago
Senior Electrical Engineer
CP Engineers
Remote, United States
The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control…
Added 3 hours ago
Senior Electrical Engineer
CP Engineers
Remote, United States
The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control…
Added 3 hours ago
Senior Electrical Engineer
CP Engineers
Remote, United States
The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control…
Added 3 hours ago
Program Delivery Lead, Benefit Enablement & Execution
Humana Inc.
United States
Humana’s Consumer Product Management team is seeking an experienced Program Deliver Lead, Benefit Enablement & Execution, to join working remote anywhere in the US. In this role, you'll…

PRETIUM

Process Engineer

Aurora, IL, United States

Apply About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 9, 2026

Original job description

Grow boldly with Pretium!

Pretium Packaging is searching for a talented, hands-on Process Engineer for our plant in Aurora, Illinois.

About Us:

Pretium Packaging, founded in 1992, is a leading supplier of injection-blow molded plastic containers, known for delivering superior quality, value, and customer service. With 21 manufacturing locations across North America, we provide innovative, high-performance packaging solutions to a diverse portfolio of brand owners in the U.S. and Canada.

What You'll Do:

The Process Engineer is the plant technical authority for establishing, optimizing, and sustaining capable molding processes. Approximately 80% of the role is focused on hands-on technical process engineering, including process development, SPC and capability analysis, molding trials and validation, cycle-time and part-weight optimization, defect elimination, tooling and cavity performance, equipment troubleshooting, and new-product or new-mold launch support. The remaining approximately 20% applies structured continuous improvement methods to prioritize technical losses, lead focused improvement work, sustain gains, and connect validated engineering results to plant performance.

Responsibilities:

Process Development, Capability, and Control:

Establish, document, and maintain robust molding process windows, setup standards, centerline settings, and operating limits for assigned equipment, molds, materials, and products.
Apply statistical process control, control charts, process capability analysis, and trend analysis to evaluate stability and performance of critical process and product characteristics.
Lead capability studies, process trials, designed experiments, first-article runs, and production validations; document conclusions and translate findings into approved standards and control plans.
Diagnose sources of variation related to machine conditions, mold performance, resin, colorant, drying, temperature, pressure, velocity, cooling, environment, and operator methods.
Partner with Quality to define critical-to-quality characteristics, sampling plans, measurement methods, reaction plans, and acceptance criteria; support measurement-system evaluation when needed.
Use data to distinguish common-cause from special-cause variation and implement corrective actions that improve repeatability, first-pass yield, and customer performance.
Molding Process Optimization and Material Efficiency
Optimize cycle time across mold close, fill, pack/hold, cooling, recovery, mold open, ejection, trimming, and part handling while protecting quality, tooling, and equipment.
Improve part-weight consistency and identify safe lightweighting opportunities through controlled trials, dimensional and functional verification, resin-behavior understanding, and documented approval.
Analyze actual part weight against specification and BOM standards; support correction of standards when validated data shows a gap.
Optimize injection, injection blow molding, and stretch blow molding parameters as applicable, including temperature profiles, pressures, speeds, timing, cooling, air systems, material conditioning, and downstream equipment settings.
Reduce scrap and recurring defects through technical root-cause analysis of conditions such as flash, short shots, sink, warp, burns, contamination, dimensional variation, wall-distribution issues, gate or neck defects, and trim-related defects.
Improve mold and cavity performance by identifying blocked or unstable cavities, cavity-to-cavity variation, cooling imbalance, venting issues, wear, alignment problems, and tooling conditions requiring maintenance or engineering support.

Technical Troubleshooting and Production Support:

Provide hands-on support for startups, changeovers, process interruptions, chronic performance losses, and difficult quality problems; restore the process to validated conditions before optimizing.
Set up and adjust molding machines, trimmers, labelers, reamers, inspection systems, conveyors, auxiliaries, and related automation; verify safe and correct sequence timing.
Troubleshoot equipment and control-system issues in partnership with Maintenance and Controls resources, including sensors, heaters, pneumatics, hydraulics, water systems, drives, and machine interfaces.
Review daily process checks, setup sheets, alarms, downtime, scrap, cavity status, and quality data to identify deviations requiring immediate containment or deeper technical investigation.
Develop clear technical countermeasures and escalation criteria when permanent resolution requires tooling repair, equipment modification, capital, supplier support, or product-design review.

New Products, Tooling, and Engineering Change:

Process new molds, tooling, materials, and products from initial trial through production release, establishing validated parameters and documented operating ranges.
Participate in technical reviews for part design, manufacturability, resin selection, tooling concepts, cooling, venting, automation, inspection, and production readiness.
Plan and execute engineering trials with defined objectives, variables, sample requirements, quality checks, risks, and approval criteria.
Ensure approved process changes are reflected in setup sheets, control plans, work instructions, training, BOM or routing standards, and other controlled documentation before release.
Support installation and qualification of new or modified equipment and systems, including specification review, safety compliance, commissioning, loop checks, and performance verification.

Reliability, Standards, and Technical Capability Building:

Partner with Maintenance and Tooling to connect process symptoms with equipment or mold condition and to define preventive actions that improve reliability.
Develop troubleshooting guides, parameter standards, reaction plans, and technical training for process technicians, mold setters, operators, quality personnel, and supervisors.
Coach plant teams on disciplined process adjustment, data collection, defect recognition, and escalation so changes are controlled and repeatable.
Maintain accurate technical records and communicate process risks, trial results, capability gaps, and recommendations to plant leadership and cross-functional partners.

Process Optimization and Continuous Improvement (Supporting Scope):

Lead or support focused improvement projects when validated technical process losses are constraining safety, quality, delivery, cost, material usage, or capacity.
Use structured problem-solving methods, including PDCA, DMAIC, A3, 5 Why, fishbone analysis, and corrective-action methods, selectively and in proportion to the technical problem. Sustain technically validated improvements through controlled settings, process controls, standardized work, documented ownership, training, and routine verification.
Quantify operational impact and, when applicable, coordinate financial validation of completed engineering improvements with plant and Finance partners.

What You’ll Bring:

Required Qualifications:

Bachelor’s degree in Mechanical Engineering, Plastics Engineering, Chemical Engineering, Packaging Engineering, Manufacturing Engineering, or a related technical discipline; equivalent directly relevant experience may be considered to preserve access to strong hands-on molding talent.
Hands-on experience developing, troubleshooting, and optimizing plastic molding processes in a manufacturing environment.
Working knowledge of SPC, control charts, process capability, dimensional and weight data, process windows, root-cause analysis, and production validation.
Ability to connect machine and mold parameters to part quality, dimensional performance, cycle time, material behavior, and process repeatability.
Experience with molding equipment and automation relevant to the site; familiarity with Aoki, Uniloy, Zhongya, or comparable platforms is beneficial.
Ability to lead structured trials, document technical findings, communicate recommendations, and work effectively across Production, Quality, Maintenance, Tooling, and Engineering.
Strong floor presence, troubleshooting discipline, organization, attention to detail, and follow-through.
Ability to travel and provide technical support or training within the region as needed.

Preferred Qualifications:

Experience with injection molding, injection blow molding, and/or injection stretch blow molding, including oven or temperature-profile optimization where applicable.
Experience with material drying, resin processing, hot runners, cooling systems, cavity balance, lightweighting, BOM or part-weight validation, and secondary or downstream equipment.
Experience with DOE, PFMEA, control plans, measurement-system analysis, first-article qualification, process change control, and corrective-action systems.
Experience improving cycle time, scrap, process capability, blocked-cavity performance, mold changeovers, and equipment utilization.
Lean Six Sigma Green Belt or equivalent structured problem-solving experience preferred but not required.

How Success Will Be Measured:

Stable and capable processes for critical product and process characteristics.
Reduced recurring defects, scrap, material variance, blocked-cavity losses, and process-related downtime.
Validated cycle-time and part-weight improvements that maintain safety, quality, dimensional, and functional requirements.
Accurate and sustained process standards, control plans, setup sheets, and reaction plans.
Effective mold, material, product, equipment, and engineering-change launches that transition into capable and repeatable production performance.
Improved technical capability of plant process technicians, operators, and cross-functional partners.

Why Join Pretium?

This role offers the opportunity to serve as a hands-on technical leader in plastic molding, with primary accountability for process capability, product quality, material efficiency, equipment performance, and stable production. Candidates will solve complex manufacturing problems, develop and validate robust molding processes, support tooling and equipment improvements, and use focused continuous improvement methods to sustain technical results and strengthen plant performance.

Apply About employer

More about this job

Skills

Process engineering
SPC
Troubleshooting
Process improvement
Statistical process control
Characteristics of products
Root cause analysis
Inspection
Troubleshoot
Control systems
Statistical quality control
Documentation
Regulatory compliance
Leadership
Problem solving
Mechanical engineering
Chemical engineering
Packaging engineering
Attention to detail
Technical support
Lean Six Sigma Green Belt

Report this job