Find work in the United States.

A simpler way to find your next job.

Jobs in the United States

25+ jobs

Save this search

Added just now
Sr. Principal Electrical Engineer IV
Northrop Grumman
Chandler, AZ · Chandler
Burndown of nonconformances and/or root cause failure analysis of electronic systems.
Added just now
Principal Engineer Electrical
Northrop Grumman
Chandler, AZ · Chandler
…detection/state management/recovery, and SEE functional and catastrophic failure…
Added just now
Engineer Material Process - Level 5
Northrop Grumman
Chandler, AZ · Chandler
Hands on support of active testing, development, and failure analysis work in our labs using various lab equipment
Added just now
JA
Supplier Industrialization Engineer, Composites & Specialty Materials
Joby Aviation
San Carlos, CA
- $91,200 to $171,300 USD / year
Experience with process validation tools: Process Flow Diagrams, Process Failure Mode and Effects Analysis (PFMEA), Control Plans, Process Capability (Cpk), and other elements of the…
Added 3 mins ago
Prin Engineer Quality / Sr Prin Engineer Quality
Northrop Grumman
Clearfield, UT · Clearfield
Responsible for failure investigations, Customer CARs, escapements, and data analytics to drive corrective actions. Communicate with customers, within the required time frame, on…
Added 3 mins ago
KI
Materials & Failure Analysis Technician
Karman Industries
Los Angeles, CA
- $30 to $60 USD / hour
The Materials & Failure Analysis Technician will support materials testing, characterization, metallography, and root-cause investigations involving metallic and polymeric materials. This…
Added 6 mins ago
ID1 Bench Engineer
Micron Technology
Boise, ID · Boise
Complete failure analysis and reports for subassemblies not meeting expected performance.
Added 6 mins ago
Intern- YE Physical Failure Analysis Engineer
Micron Technology
Boise, ID · Boise
As a PFA Engineer Intern on the Yield Enhancement (YE) team, you will support physical failure analysis investigations of defect issues found by YE and Fab customers. You will learn to…
Added 6 mins ago
Intern - YE-Electrical Failure Analysis Engineer
Micron Technology
Boise, ID · Boise
…across Micron's advanced memory portfolio. By using electrical failure analysis, wafer testing, data analytics, automation, and innovative engineering methodologies, the team identifies…
Added 10 mins ago
Analyst, Systems - Store Operations
Family Dollar
Chesapeake, VA
…relevant identifiers and timestamps, reproduce or isolate the failure, coordinate responders, restore service, validate downstream recovery, and document the outcome, and engage other IT…
Added 10 mins ago
Analyst, Systems - Merchandising
Family Dollar
Chesapeake, VA
…relevant identifiers and timestamps, reproduce or isolate the failure, coordinate responders, restore service, validate downstream recovery, and document the outcome, and engage other IT…
Added 10 mins ago
Analyst, Systems - Supply Chain
Family Dollar
Chesapeake, VA
…relevant identifiers and timestamps, reproduce or isolate the failure, coordinate responders, restore service, validate downstream recovery, and document the outcome, and engage other IT…
Added 15 mins ago
PCB Integration Engineer
Garmin International, Inc.
Cary, NC
Strong understanding of reliability concepts, failure modes, root cause analysis, and corrective action methodologies
Added 17 mins ago
Imaging Engineer III
Trimedx Holdings LLC
Erie, PA
Perform periodic inspections of current inventory status and maintain common failure parts inventory to ensure equipment uptime
Added 26 mins ago
Staff Maintenance / Reliability Engineer
Vulcan Elements
Benson, NC · Durham, NC
…production. Core responsibilities include detailed equipment failure analysis, materials of construction evaluations, engineered seal and gasket selection, and development of preventive and…
Added 26 mins ago
Metallography Lab Technician (Onsite)
RTX
United States
Assist engineers in specimen preparation and testing, as appropriate (e.g. process development, failure analysis, material defects investigation, etc.). Coordinate test sample/part…
Added 27 mins ago
Mechanical Engineer 5
Lam Research
Fremont
Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
Added 32 mins ago
Principal Engineer Electrical
SP - Launch Vehicles
United States
…detection/state management/recovery, and SEE functional and catastrophic failure…
Added 32 mins ago
Engineer Material Process - Level 5
CORP-Corporate Office
United States
Hands on support of active testing, development, and failure analysis work in our labs using various lab equipment
Added 32 mins ago
SO
Highway Maintenance Specialist - Walden (CDL Training Provided)
State of Colorado
Walden, CO
- $53,940 to $54,000 USD / year
Added 32 mins ago
SO
Permits Project Manager - Durango
State of Colorado
Durango, CO
- $72,264 to $83,100 USD / year
Added 32 mins ago
SO
Indoor Air Quality Comm & Outreach Spec - PHCOP III - Health Equity Branch
State of Colorado
Glendale, CO
- $59,460 to $65,406 USD / year
…planning, prevention, detection, testing, data management, analysis, investigation, mitigation, preparedness, and response to communicable diseases and other acute health…
Added 32 mins ago
SO
Correctional Youth Security Officer II - Pueblo Youth Service Center
State of Colorado
Pueblo, CO
- $29.31 to $41.04 USD / hour
Added 32 mins ago
SO
Correctional Youth Security Officer I - Pueblo Youth Service Center
State of Colorado
Pueblo, CO
- $27.92 USD / hour
Added 32 mins ago
SO
CSP Business System Administrator
State of Colorado
Lakewood, CO
- $72,264 to $115,632 USD / year

Pexco

Quality Engineer

Athol, MA, United States

Apply About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 2, 2026

Original job description

environment. This position provides extensive and diversified quality engineering and metrology support for manufacturing products and processes while driving systems & completing projects in broad areas of assignment. Basic responsibilities include, Quality/ technical support, metrology, mentoring and training of quality assurance employees, failure investigation, disposition of nonconforming materials, conducting and updating risk analysis documentation defining/refining quality inspection plans, performing data collection, and trending of key metrics, and identifying and addressing supplier quality issues.

These responsibilities would include ensuring key performance targets of the business are achieved while maintaining up to date accurate tracking information. This position must work closely with other departments to provide information in a timely manner.

RESPONSIBILITIES

· Responsible for the Quality Management System and driving continuous improvement on the manufacturing floor.

· Leads Kaizen events.

· Works in a team capacity to create control plans, process instructions, inspection and testing requirements, statistical process control (SPC), and calibration & measurement system analysis.

· Conducts internal and external audits.

· Manages Supplier and Customer Quality.

· Applies Six Sigma principles, tools and methodology.

· Participates in failure mode effect analysis (FMEA) including Design (DFMEA) and Process (PFMEA).

· Inspection Reports (FAIR) for new part introduction and existing part revisions.

· Writes or reviews technical and performance specifications, quality levels, sampling plans, and inspections procedures.

· Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of finished product.

· Ensures flawless launch execution to committed dates.

· Drives root cause and corrective action analysis, including use of 8D process and other tools utilized to identify root cause of failure.

· Coordinates the MRB process to identify, evaluate, and dispose of nonconforming products.

· Specifies inspection and testing mechanisms and equipment.

· Supports the mechanical inspection of plastic and metal components through advanced fixture design and performing dimensional measurements using CMM, Vision, Laser, CT, and manual instruments.

· Writes or reviews technical and performance specifications, quality levels, sampling plans, and inspections procedures.

· Quality Plans should include performance metrics and detailed milestones to track progress.

· Oversee and perform data collection, as well as interpret results to coordinate improvement efforts utilizing various statistical methods.

· Reviews receiving inspections of materials and supplies (Boxes/Packaging) for the specific program.

· Recommends revision of specifications when indicated.

· Interfaces with all other levels within the organization and with customers and suppliers on quality related issues.

· Responsible for the quality of Assigned products on 3 shifts (up to 7 days a week).

· Proficient with Microsoft Office (i.e. graphs, charts, formulas).

· High Mechanical Aptitude.

QUALIFICATIONS

· Minimum Three (3) Years of Experience in a manufacturing environment.

· Bachelor Degree in Engineering.

· Blue Print Reading and Dimensional Analysis Proficiency.

· Contact and Non-Contact Metrology Background.

· Geometric Tolerancing.

· ISO-13485 background / TS16949 background.

· Lean Manufacturing Experience (specifically: one-piece flow, Value Stream Mapping, Standard Work, Visual Factory).

· Experience in a Quality Engineering function including mechanical inspection of parts, a plus.

· ASQ Certified Quality Engineer.

· Engineering problem solving/decision making.

· Strong knowledge of PPAP/High Volume Process and Part Validation Techniques.

· Experience with Process Validation and/or Test Method Validations (for example: IQ, OQ, PQ and/or TMV).

· Strong statistical analysis and mathematical ability a must.

· Ability to perform metrology on plastic parts.

· Proficient with Microsoft Office (i.e. graphs, charts, formulas).

COMPANY OVERVIEW

Performance Plastics – www.performanceplastics.com

Performance Plastics has molded PEEK since the material was first introduced in the early 1980’s and we have extensive experience injection molding Torlon, various fluoropolymers (e.g. PFA, FEP, PVDF, ETFE, etc.) and other high performance thermoplastic compounds. Further, our company is one of the few able to injection mold fluoropolymers using 8 cavity, high volume molds with hot runner systems to produce thin-walled intricate parts.

Pexco (Parent Company) – www.pexco.com

Pexco is a leading component supplier across a variety of industrial end markets and applications with production facilities in the US, Mexico and Canada. The Company is primarily engaged in designing and manufacturing extruded plastic tubes and profiles by way of an expansive twelve-site footprint, but also offers a variety of differentiated, value-added services, including design, prototyping, die building, sub assembly, fabrication, and supply chain management. Pexco’s innovative products are used for fluid handling, electrical insulation, traffic safety, infrastructure, and lighting applications in aerospace & defense, medical, electronics & semiconductors, environmental testing, pharmaceuticals, food & beverage, and other high-growth end-markets. The Company sells directly to more than 2,000 customers comprised of OEM’s and end-users, as well as through distribution in certain markets.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Pexco is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status.

Apply About employer

Report this job