Jobs in the United States

25+ jobs

Save this search

Added 2 hours ago
PL
Manufacturing Machine Operator III
ProCaps Labs
Broomfield, CO
- $27 to $29 USD / hour
As a Manufacturing Machine Operator III, you’re the go-to technical expert on the production floor. You’ll run and troubleshoot equipment across all of our cleansing bar and chocolate…
Added 3 hours ago
QA
Animal Care Technician I
Queen Anne's County Government, Maryland
Centreville, MD
- $40,499 to $77,991 USD / year
Operate washing machine and other appliances.
Added 3 hours ago
PL
Manufacturing Machine Operator III
ProCaps Labs
Broomfield, CO
- $27 to $29 USD / hour
As a Manufacturing Machine Operator III, you’re the go-to technical expert on the production floor. You’ll run and troubleshoot equipment across all of our cleansing bar and chocolate…
Added 4 hours ago
MACHINE OPERATOR
Progress Rail Services Corp.
Sidney, NE
First Shift position operating machines that allow us to break down railcar wheelsets, recondition axles to be used for new sets, mount new wheels to reconditioned axles, recondition…
Added 5 hours ago
II
Production Machine Operator - Picker
Inergroup Insourcing Solutions
Fairfield, OH
- From $17 USD / hour
Inergroup is hiring immediately for First Shift Production Machine Operator – Packer jobs in Fairfield, OH. As a Production Machine Operator – Packer, you will monitor machine production,…
Added 5 hours ago
HS
Machine Operator, Sintering/Furnace, 2nd Shift
H.C. Starck Solutions
Euclid, OH
- $23 to $26 USD / hour
Machine Operator - Furnace/Sintering | 2nd Shift
Added 5 hours ago
HS
Machine Operator, Conditioning
H.C. Starck Solutions
Euclid, OH
- $22.67 to $26 USD / hour
As a Machine Operator, Conditioning, you will help turn specialized metals into precision products used across aerospace, defense, semiconductor manufacturing, and energy. You will assist…
Added 6 hours ago
Apprentice - Machine Operator
Penn United Technologies, Inc.
Saxonburg, PA
Added 6 hours ago
Apprentice - Machine Operator
Penn United Technologies, Inc.
Saxonburg, PA
Added 6 hours ago
SC
Machine Technician
Spherion Connellsville
CONNELLSVILLE, PA
- $19.77 USD / hour
Spherion Staffing is looking to fill a 2nd or 3rd shift, Machine Technician position in Mount Pleasant, PA. The pay rate is $19.77 HOURLY. This is a Temp to Hire opportunity. Mechanically…
Added 6 hours ago
BM
CNC Operator Level 3 - 76cb9026-43f2-43b4-a10a-394e2e2134f5
Beck Manufacturing
Columbia, PA
- $38.22 to $40.22 USD / hour
Position Title: CNC Operator Level 3 Department: Manufacturing & Distribution - Skilled Jobs Employment Type Full Time Location: Columbia, PA - Plant Workplace Type: Onsite Reporting To:…
Added 6 hours ago
Machine Operator MS I - 10102
MSA Safety Inc.
Murrysville, PA
MSA, The Safety Company Machine Operator MS I US-PA-Murrysville Requisition ID: 2026-10102 Type: Full-Time # of Openings: 2 Category: Manufacturing Overview Are you someone who is…
Added 6 hours ago
Machine Operator - Plasma - 3rd Shift - *NEW Increased Shift Differential!*
Olympic Steel
Chambersburg, PA
Added 6 hours ago
PA
Machine Operator (Folder/Gluer) - Overnight (7pm - 7am)
Pro Ampac
Bethlehem, PA
- $22.75 USD / hour
Added 6 hours ago
PC
Machine Operator (Corrugator) - 2nd Shift
Packaging Corporation of America
Lancaster, PA
- $27.77 USD / hour
Added 6 hours ago
PC
Machine Operator (Double Backer) - 2nd Shift
Packaging Corporation of America
Lancaster, PA
- $26.71 USD / hour
Added 6 hours ago
PC
Machine Operator (Flexo) - 2nd Shift
Packaging Corporation of America
Lancaster, PA
- $26.71 USD / hour
Added 6 hours ago
PC
Fabricating Lead Person
Packaging Corporation of America
Lancaster, PA
- $28.34 USD / hour
Added 6 hours ago
PC
Machine Operator (Flexo) - 3rd Shift
Packaging Corporation of America
Lancaster, PA
- $26.71 USD / hour
Added 7 hours ago
Machine Operator
UW Interco, LLC
Louisville, KY
First Shift: Monday through Thursday 4:00am-2:30pm, 10 hr shift
Added 7 hours ago
Machine Operator II - 2nd Shift (onsite)
Collins Aerospace
Durham, NH
This position is 2nd shift with the hours of Monday-Friday 3:30pm - 12:00am and overtime on an as needed basis.
Added 7 hours ago
KS
Industrial Maintenance Technician
Kelly Services
Coppell, TX
- $29 USD / hour
Safety & Operator Coaching: Guide machine operators on Autonomous Maintenance (first-line PM inspections and safe operating practices); enforce safety standards.
Added 8 hours ago
Quality Technician
Express Employment Professionals
Eau Claire, WI
If you have experience in manufacturing, production, factory, machine operator, production operator, or quality control environments, we encourage you to apply. Previous warehouse or…
Added 8 hours ago
S
CNC Machinist
Staffmark
Buffalo Grove, IL
- $31 to $33 USD / hour
Wabtec is hiring an experienced CNC Machine Setup Operator in Buffalo Grove, IL. If you have hands-on CNC mill and lathe setup experience and take pride in producing precision components,…
Added 9 hours ago
Machine Operator II (First Shift)
Sonoco Products Company
Hartselle, AL
While reporting to the Team Lead as the Machine Operator II, you will be responsible for running machines for each customer’s job with extreme attention to detail. The equipment we operate…

IPEX USA LLC

Friatec CNC Operator C

United States

Apply About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 2, 2026

Original job description

IPEX is one of North America's leading providers of advanced plastic piping systems. Our mission is to shape a better tomorrow by connecting people with water and energy.

We currently have an exciting opportunity for a Friatec Operator to join our team at our PVC facility in Pineville, NC. This role reports to the Production Supervisor and is ideal for individuals who are safety-focused, detail-oriented, and thrive in a fast-paced manufacturing environment.

JOB PURPOSE

To manufacture Frialen electro-fusion couplings on a CNC lathe per work instructions, applicable specifications and quality standards.

DUTIES AND RESPONSIBILITIES

GENERAL RESPONSIBILITIES FOR ALL OPERATORS

Support and comply with EH&S policies and procedures as communicated and documented in compliance with EH&S/ISMS 1.0 & 2.0.
Maintain acceptable housekeeping, environmental and safe working conditions as defined and monitored through EH&S/ISMS 4.0.
Support and comply with the efforts of the Joint, Health & Safety Committee (JHSC) as defined in EH&S/ISMS 8.0.
Attend and participate in monthly employee meetings as scheduled and defined in EH&S/ISMS 10.0.
Report all accidents/incidents to the supervisor immediately. Cooperate, participate, and provide information during the accident/incident investigation upon request in compliance with EH&S/ISMS 11.0.
Inspect and report potential unsafe/hazardous conditions in compliance with EH&S/ISMS 12.0.
Use all protective guards and devices and report any absence or defect in any equipment or device in compliance with EH&S/ISMS 13.0.
Wear and use personal protective equipment appropriately as defined and required by EH&S/ISMS 14.0.
Report non-conformances in any lockout equipment and/or device, and do not attempt to operate or energize any machine, equipment, or process when it is locked and tagged out in compliance with EH&S/ISMS 19.0.
Comply with working at heights requirements as defined in EH&S/ISMS 20.0.
Report all injuries/accidents/incidents regardless of how minor and document the use of first aid supplies as required by EH&S/ISMS 21.0.
Provide documentation and comply with Claims Management and Modified/Restricted. Work requirements when applicable and as defined in EH&S/ISMS 24.0.
Participate and comply with New Hire/Promotion Orientation as defined in EH&S/ISMS 25.0 and HR Best Practices – USA.
Attend and participate in training as defined and requested in EH&S/ISMS Element 26.0 and the plant training matrix.
Comply and support the hazardous condition program by reading labels and MSDS’s, following warnings, precautions and work instructions, using the correct personal protective equipment, learning emergency procedures, and practicing safe work habits in compliance with EH&S/ISMS 28.
Comply with work instructions as defined in EH&S/ISMS 31.0.
Comply with mobile equipment safe working practices and guidelines including pre-use inspections in compliance with EH&S/ISMS 32.0.
Know, understand and comply with all emergency preparedness procedures as defined in compliance with EH&S/ISMS 34.0.
Comply and support EH&S goals and objectives as defined in compliance with EH&S/ISMS 47.0.
Immediately report any unsafe practices/conditions to your Shift Supervisor and work in accordance with safety rules/policies/work procedures in compliance with EH&S/ISMS 48.0.
Comply with all policies, procedures and work practices as outlined by the HR Best Practices – USA, the Collective Bargaining Agreement, and EH&S programs at all times.
Perform other duties as required and/or assigned.

POSITION SPECIFIC RESPONSIBILITIES FOR C-OPERATORS

The duties include but are not limited to following:

Ability to operate the Friatec band saw and cut HDPE pipe to proper length for use in CNC lathe under limited supervision after saw is set up.
Ability to produce couplings at a standard pieces-per-hour rate after part program has been entered by A or B operator.
General knowledge of ohm reading equipment and Friamat fusion processors for use during coupling quality inspection.
Ability to perform dimension inspections on couplings using computerized measuring machine.
Ability to assist in lathe changeover under supervision.

COMPLEXITY AND JUDGMENT

Regularly encounters problems that involve multiple-choice options, but through prior exposure, experience and established procedures/policies can determine the most appropriate course of action. Work involves both routine and non-routine tasks within well-defined standards.

SKILLS & KNOWLEDGE

A high school degree or equivalent is required with the ability to read, write and do basic math. Must have the ability to use basic hand tools and operate a forklift.

SUPERVISORY RESPONSIBILITY

The Friatec Lathe Operator reports to the Compound/Friatec Supervisor. Work instructions are directed by the Compound/Friatec Supervisor but may be conveyed through Lead hands. Leadhands do have the authority to direct, lead, and adjust work assignments within defined limits. The Compound/Friatec Supervisor reports to the Compound/Friatec Production Manager.

CONTACTS The incumbent interacts daily with Supervisory and Leadhand personnel. Daily interaction may be required with Quality Control, Distribution, and Maintenance personnel. Occasional contact may be required with other departments.

WORKING CONDITIONS

The physical effort required is considerable due to heavy physical activities of various kinds. The physical environment is considered moderate due to exposure to various substances or equipment that could produce discomfort and/or moderate risk of accident or ill health. The sensory attention is considered moderate due to often requiring increased demand on two or more senses at a time. The mental stress is considered moderate due to regular pressures from deadlines, quotas and accuracy.

LEGISLATIVE/REFERENCE MATERIAL

IPEX Environmental, Health & Safety (EH&S) Manual
IPEX Safety Management System (ISMS)
ISO 9001
Approved Compounds/Components List
IPEX Quality Manual
Applicable ASTM Standards

Benefits:

401(k) plan with company match up to 5%
Comprehensive Health, Dental, and Vision coverage options
COBRA reimbursement while transitioning to IPEX benefits
Plant annual bonus program
Set schedule with bi-weekly pay
Safety equipment provided (safety glasses, ear plugs, etc.)
Career growth opportunities with an industry-leading manufacturer

Equal Opportunity & Accessibility:

IPEX is committed to providing accommodations for people with disabilities throughout the recruitment process. To request an accommodation, please contact HR at HR@ipexna.com.

Apply About employer

More about this job

Skills

CNC
C
Regulatory compliance
Housekeeping
Provide information
Use safety equipment in construction
Working at heights
First Aid
Provide documentation
MSDS
Personal protective equipment
Inspection
Operate forklift
Quality control
ISO 9001

Report this job