Jobs in the United States

25+ jobs

Save this search

Added 13 mins ago
Set Up I (Dishrack)
Whirlpool
Findlay, OH · Findlay
● Machine Setup and Operation: Set up and operate heavy stamping presses (400-600 ton), transfer presses, and automatic/semi-automatic punch presses. Perform setup, changeover, and required…
Added 37 mins ago
A
General Production Worker
Aerotek
Athens, AL
- $20.66 to $21.66 USD / hour
Experience in general production and machine operation.
Added 37 mins ago
A
Manual Machinist
Aerotek
Cypress, CA
- $42 to $50 USD / hour
Lay out, set up, and machine parts to exacting tolerances and patterns, determining appropriate tooling, feeds, and speeds for lathes, mills, and other production equipment.
Added 53 mins ago
EV
Veterinary Assistant Training Program
Ethos Veterinary Health
Lawrence, MA
- From $15.75 USD / hour
Assist with surgical preparation and anesthesia machine setup
Added 53 mins ago
CNC Programmer (Hourly) - Wilmington, MA
Hubbell Incorporated
Wilmington, MA
Perform machine setup and operation of CNC milling equipment.
Added 1 hour ago
AM
Advanced CNC Mill Machinist
APM Manufacturing
Orange, CA
- $35 to $45 USD / hour
Develop setup strategies, select tooling, and design/modify fixtures as needed.
Added 2 hours ago
BL
Content Strategist
Big Loud
Santa Monica, CA
- $65,000 to $80,000 USD / year
…within a clearly defined lane. You keep the creative content machine fed, on time, and aligned with what's actually working on social media in 2026 &…
Added 2 hours ago
WO
Senior Paid Media Manager
Well-Oiled Operations
Remote, United States
- $85,000 to $100,000 USD / year
…strong in strategy and data analysis as they are in campaign setup. You are not just pressing buttons. You are responsible for the outcomes: leads, sales, profitability, and the data story…
Added 2 hours ago
SCADA Support Engineer
VTS3 Corp.
New York, NY
Setup/Configure/Program logic, control schemes, network and communication paths for Real-Time Automation Controllers (RTAC), Remote Terminal Units (RTUs), Intelligent Electronic Devices…
Added 2 hours ago
Field Service Engineer Level 3 - Machine Tools - IL #2716
Right Talent Right Now
Rockford, IL
Position Title Field Service Engineer Level 3 - Machine Tools - IL #2716
Added 2 hours ago
Senior Electrical Controls Engineer (9644)
Trialon Corporation
Lockport, NY
Working knowledge of machine communications via Ethernet/IP and LANs
Added 2 hours ago
Manufacturing Engineering Technician
Trialon Corporation
Novi, MI
Train factory personal on equipment operation and setup.
Added 2 hours ago
CNC Setup Technician - RI #2610
Right Talent Right Now
Providence, RI
Position Title CNC Setup Technician - RI #2610
Added 2 hours ago
Field Service Engineer Level 3 - Machine Tools - IL #2716
Right Talent Right Now
Rockford, IL
Position Title Field Service Engineer Level 3 - Machine Tools - IL #2716
Added 2 hours ago
Field Service Engineer Level 3 - Machine Tools - IL #2716
Right Talent Right Now
Rockford, IL
Position Title Field Service Engineer Level 3 - Machine Tools - IL #2716
Added 2 hours ago
Field Service Engineer Level 3 - Machine Tools - IL #2716
Right Talent Right Now
Rockford, IL
Position Title Field Service Engineer Level 3 - Machine Tools - IL #2716
Added 2 hours ago
SDET
SRI Tech solutions Inc
Redmond, WA
Setup of test environments to cover platform matrix. These environments will consist of Azure based VMs, SQL Server on various OS’s, Microsoft R Server. Operating systems will include both…
Added 2 hours ago
Operations Associate II/Assembly-Packaging
Partnered Staffing - Kelly Services
Lancaster, PA
Performs manufacturing processes of increased complexity/responsibility/criticality, for example, packaging machine changeover, setup, breakdown, basic PM s
Added 2 hours ago
Machine Operator/Blender
Partnered Staffing - Kelly Services
Lancaster, PA
Performs manufacturing processes of increased complexity/responsibility/criticality, for example Processing/Compression, machine changeover, setup, breakdown, basic PM’s
Added 2 hours ago
Machine Operator - Setup Technician
Partnered Staffing - Kelly Services
DeLand, FL
As a Machine Operator – Set-up Technician placed with Kelly Services, you will setup various production machines and ancillary equipment according to procedures and product specifications…
Added 2 hours ago
SS
Machinist
Spherion Staffing
Muncie, IN
- $15 USD / hour
-Setup and operate lathes, mills, grinders and saws.
Added 2 hours ago
Cold Heading Setup Operator
Shakeproof - ITW
Elk Grove Village, IL
· Selects, installs, and aligns died, cutting tools, guides, and stops to set up machine.
Added 2 hours ago
Thread Roll Setup Operator
Shakeproof - ITW
Elk Grove Village, IL
· Adjusts speed control knobs to synchronize transfer and ejection of stock with machine action.
Added 2 hours ago
Assembler
Partnered Staffing - Kelly Services
Santa Rosa, CA
Identify/communicate equipment/setup issues and provide status updates to Engineers/Supervisor/Peers
Added 2 hours ago
Recruitment Drive: Java / .Net / BA
Saviance Technologies
New York, NY

Hydro

Manufacturing Engineer

Phoenix, AZ, United States

Apply About employer

Applications open in a new tab.

Job details

Experience: 0–5 years of manufacturing or process engineering experience.
Posting language: English

Original job description

Hydro Extrusions is a world-leading aluminium extrusion business counting around 100 production sites in 40 countries and employing 20,000 people. Through our unique combination of local expertise, global network, and unmatched R&D capabilities, we can offer everything from standards profiles to advanced development and manufacturing for most industries. Since 1905, Hydro has turned natural resources into valuable products for people and businesses with focus on a safe and good workplace for our 30,000 employees in more than 140 locations. What we offer you

Medical, Rx, Dental, Disability, Life Insurance, Flexible Spending Accounts
Retirement Savings Plans with Company Match/Contributions
Education Assistance
Bonus Plan Eligibility
Parental Leave

Job Summary:

The Manufacturing Engineer – Extrusion is responsible for developing, implementing, and continuously improving manufacturing processes for aluminum fabricated components and assemblies. This position supports aluminum extrusion and fabrication operations, with a focus on improving process performance, productivity, scrap, and recovery. The role drives improvements in safety, quality, productivity, and cost efficiency through process development and optimization, continuous improvement, new product introductions, and data-driven problem solving. The Manufacturing Engineer collaborates with cross-functional teams to optimize manufacturing performance, establish standardized processes, and support operational excellence.

What you will be doing

Develop, implement, and optimize manufacturing processes for aluminum fabrication operations, including CNC machining, sawing, punching, bending, welding, and assembly.
Lead process planning and implementation for new products and fabrication lines, including routings, bills of material, process documentation, and production readiness.
Collaborate with Product Development and Sales to evaluate manufacturability, production capacity, cycle times, and cost considerations for new products.
Develop and maintain standardized work instructions, setup procedures, and manufacturing process documentation.
Design, specify, and validate tooling, fixtures, gauges, and equipment to support manufacturing quality and efficiency.
Partner with CNC programmers and technicians to validate machining programs, equipment setups, and cycle times.
Conduct time studies, process evaluations, and line balancing to identify production bottlenecks and improve throughput.
Lead root cause analysis and corrective action initiatives to address quality issues, equipment downtime, process inefficiencies, and customer concerns.
Apply Lean manufacturing methodologies to reduce scrap, improve productivity, minimize setup times, and optimize manufacturing costs.
Support equipment selection, capital improvement projects, vendor coordination, equipment installation, and operational validation.
Collaborate with Maintenance to improve equipment reliability, preventive maintenance practices, and critical spare parts planning.
Manage engineering changes and maintain accurate production documentation, including drawings, routings, programs, and work instructions.
Maintain accurate manufacturing process data and records within ERP/MES systems.
Provide technical guidance and training to operators, technicians, and production leads on new or revised manufacturing processes.
Promote safe manufacturing practices through risk assessments, ergonomic improvements, machine guarding, and compliance with established safety standards.
Collaborate with Production, Quality, Maintenance, Supply Chain, and other departments to resolve operational challenges and meet customer requirements.

What will make you successful?

Required Education/Experience:

Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related engineering discipline.
0–5 years of manufacturing or process engineering experience. Recent engineering graduates with relevant internship or cooperative education experience may be considered.
Familiarity with 3D CAD software and Microsoft Office applications, particularly Excel.
Ability to read and interpret engineering drawings, specifications, and geometric dimensioning and tolerancing (GD&T).
Working knowledge of Lean manufacturing principles and root cause analysis methodologies.
Ability to develop manufacturing processes, evaluate production performance, and identify continuous improvement opportunities.
Knowledge of manufacturing process documentation, standard work, routings, and bills of material.
Ability to evaluate cycle times, production capacity, equipment performance, and manufacturing costs.
Ability to collaborate effectively with cross-functional teams and provide technical guidance to production personnel.
Strong organizational and project coordination skills, with the ability to manage multiple engineering projects and priorities.
Ability to work in both office and industrial manufacturing environments, including regular interaction with manufacturing equipment and production personnel.
Ability to comply with company safety policies and wear required personal protective equipment (PPE), including safety glasses, hearing protection, and safety footwear.
Flexibility to support off-shift production activities, new product launches, and equipment downtime events as needed.
Ability to travel up to 10%.

Preferred Skills/Qualifications:

Lean Six Sigma Green Belt certification or equivalent.

• Experience using manufacturing data to improve process performance, productivity, scrap, recovery, or throughput.

• Experience in aluminum extrusion, metal fabrication, and/or aluminum manufacturing.

Experience with aluminum fabrication processes, including CNC machining, sawing, punching, bending, welding, and assembly.
Knowledge of aluminum extrusion design and manufacturing, Knowledge of aluminum extrusion design and manufacturing, including extrusion processes, press capabilities, and process optimization.
Experience designing tooling, fixtures, and manufacturing aids.
Experience with CNC machining processes.
Familiarity with CNC programming and CAM software.
Proficiency in SolidWorks.
Knowledge of manufacturing quality systems, engineering change control, and equipment validation.
Knowledge of PFMEA, control plans, statistical process control (SPC), and production part approval processes (PPAP).
Experience with ERP/MES systems.
Bilingual proficiency in Spanish.

Equal opportunities

Hydro in North America is an Equal Opportunity Employer where all phases of employment are based strictly upon the qualifications of the individual as related to the work requirements of the position. This policy is applied without regard to race, sex, sexual orientation, gender identity, religion, national origin, ancestry, age, disability, veteran status, marital status or any other category protected by law. We strive to provide equal opportunities for all to contribute and succeed with us.

As part of our recruitment process, we may use job‑related assessments in selected roles. These tools help us better understand work‑related strengths and support a fair and consistent hiring process. Any assessment results are reviewed together with your experience, qualifications, and interviews, and are never used as the sole basis for hiring decisions.

If you need an accommodation in order to complete the application, please contact Hydro Recruiting via email at recruiting.north.america@hydro.com

Apply About employer

More about this job

Skills

Manufacturing processes
Process improvement
Problem solving
CNC machining
Welding
Assembly
Documentation
Sales
CNC
Machining
Root cause analysis
Lean manufacturing
Preventive maintenance
ERP
MES
Regulatory compliance
Supply chain management
Mechanical engineering
Industrial engineering
Process engineering
CAD software
Microsoft Office
Microsoft Excel
Read engineering drawings
Personal protective equipment
Lean Six Sigma Green Belt
Extrusion processes
CAM software
Dassault Systemes SolidWorks
Quality control systems
Statistical process control
SPC
Bilingualism

Report this job