Jobs in the United States

25+ jobs

Save this search

Added 23 mins ago
UO
Flight Software Simulation Engineer
University of Colorado Denver
Boulder, CO
- $34,986 USD / year
LASP is looking for a Flight Software Simulation Engineer to join the spacecraft simulator team for a deep space mission that will tour the inner solar system and explore the main asteroid…
Added 33 mins ago
BU
Controls 1 Engineer
Blue United Sourcing
Garland, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
Controls 1 Engineer
Blue United Sourcing
Houston, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
Controls 1 Engineer
Blue United Sourcing
Milwaukee, WI
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
Controls 1 Engineer
Blue United Sourcing
St. Louis, MO
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
Controls 1 Engineer
Blue United Sourcing
Dallas, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
Controls 1 Engineer
Blue United Sourcing
Fort Worth, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
PLC and HMI Controls Engineer, Manufacturing
Blue United Sourcing
Garland, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
PLC and HMI Controls Engineer, Manufacturing
Blue United Sourcing
Dallas, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
PLC and HMI Controls Engineer, Manufacturing
Blue United Sourcing
Fort Worth, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
PLC and HMI Controls Engineer, Manufacturing
Blue United Sourcing
Houston, TX
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
PLC and HMI Controls Engineer, Manufacturing
Blue United Sourcing
Milwaukee, WI
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 33 mins ago
BU
PLC and HMI Controls Engineer, Manufacturing
Blue United Sourcing
St. Louis, MO
- $80,000 to $83,000 USD / year
Blue United Sourcing is partnering with a global manufacturing leader to identify a Manufacturing Controls 1 Engineer for its Garland, Texas facility. This is an opportunity to join an…
Added 51 mins ago
G
Land Development Civil Engineer
GPAC
Los Angeles, CA
- $80,000 to $130,000 USD / year
I am currently working with a very reputable firm that is looking to add a Civil Engineer to their team. If you’re a Civil Engineer looking to join a collaborative team environment look no…
Added 56 mins ago
Air Proprietary Senior Tooling Engineer
The Boeing Company
Berkeley, MO
+ Drive tooling lifecycle management, configuration control, change management, and documentation (process plans, inspection procedures, safety analyses, maintenance procedures).
Added 57 mins ago
B
Process Engineer
Blucor
Lawrenceville, GA
- $85,000 to $95,000 USD / year
…and part of a joint venture with Toshiba TEC, is seeking a Process Engineer for its Toner Department in Lawrenceville, Georgia. This is a 100% on-site role in a fast-paced, safety-conscious…
Added 1 hour ago
RC
Project Engineer
Ryan Companies US, Inc.
Denver, CO
- $40,123 USD / year
Learn project dimensional control requirements while field verifying dimensions to back check the shop drawing approval process.
Added 1 hour ago
RC
Assistant Quality Manager
Ryan Companies US, Inc.
Denver, CO
- $40,123 USD / year
Support the project-specific quality management strategy by implementing the three phases of control (Preparatory, Initial, and Follow-up).
Added 1 hour ago
RC
Quality Engineer
Ryan Companies US, Inc.
Denver, CO
- $40,123 USD / year
The Quality Engineer ensures that all phases of all mission-critical projects performed by the company or its subcontractors are carried out with the desired level of quality from inception…
Added 1 hour ago
RC
Project Engineer - Industrial
Ryan Companies US, Inc.
Denver, CO
- $40,123 USD / year
Learn project dimensional control requirements while field verifying dimensions to back check the shop drawing approval process.
Added 1 hour ago
Resident Engineer - Transportation
BKF
Remote, United States
Responsible for project Quality Control and Quality Assurance
Added 1 hour ago
Resident Engineer - Transportation
BKF
Remote, United States
Responsible for project Quality Control and Quality Assurance
Added 1 hour ago
Resident Engineer - Transportation
BKF
Remote, United States
Responsible for project Quality Control and Quality Assurance
Added 1 hour ago
Resident Engineer - Transportation
BKF
Remote, United States
Responsible for project Quality Control and Quality Assurance
Added 1 hour ago
Resident Engineer - Transportation
BKF
Remote, United States
Responsible for project Quality Control and Quality Assurance

General Motors LLC

AVD Steering Design Release Engineer

Warren, MI, United States

Apply About employer

Applications open in a new tab.

Job details

Apply by: Nov 16, 2026
Experience: 3+ years’ experience in Steering or Suspension Systems, including knowledge of related federal and global regulations, and knowledge of industry trends.
Posting language: English
Posted: Nov 2, 2026

Original job description

Job Description

At General Motors, our product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed not just to be seen, but to be felt. We’re turning today’s impossible into tomorrow’s standard - from breakthrough hardware and battery systems to intuitive design, intelligent software, and next-generation safety and entertainment features.

Every day, our products move millions of people as we aim to make driving safer, smarter, and more connected, shaping the future of transportation on a global scale.

The Role AVD Steering Design Release Engineer

Responsible for definition of requirements, design, analysis, development and control of complex subsystem where a considerable amount of creativity and initiative are involved as well as a high level of independent judgment. Exercise independent judgment, but receives general direction from supervisor. Experience with multiple cycles of Vehicle Development Process within area of responsibility.

Design, engineer, and develop high quality steering components and devise system math solutions from a clean sheet of paper to a detailed and balanced solution, on time and with excellence, and in satisfaction of performance, cost, mass, investment, and quality expectations, requirements, and standards.
Collaboration with other Chassis Designing Engineers, Tech Specialist’s, ETL’s as well as other key areas of the organization (CAE, Vehicle Architecture, Cost Estimating, Performance Integration, Manufacturing, Service Engineering, other commodities (Body, HVAC, Powertrain, etc.) to creatively and jointly develop the optimal overall vehicle solution.
Utilize Unigraphics (NX) three-dimensional (3D) computer aided design (CAD) system and work in the TeamCenter environment to design steering components.
Creation of "readiness assessments" prior to significant program gates, to summarize the status and key issues.
Support the development of SOR (system of requirements), CTS (component technical specification) and SSTS (subsystem technical specifications) for subsystem
Supports/Leads technical review
Performs appropriate studies/alternatives, and recommends program direction based on cost, mass, timing
Perform steering articulation studies, engineer, and design/package steering components to ensure that minimum clearance requirements are met and that components will not interfere with one another during full suspension and steering travel.
Perform geometric dimension and tolerancing (GD& T) stack up studies and apply GD& T techniques to ensure that all parts will fit, form, and function when components are manufactured and assembled.
Study manufacturing feasibility, design, and development of steering components that can be manufactured with minimized complexity.
Study serviceability and design steering components with easy tool access.
Supports/Leads PDT (product development team) for component/subsystems (e.g. timing, parts list, DFM)
Validates design using analytical tools including finite element, modal, virtual builds and others at component level
Collaboration with the downstream Designing Engineer to allow them to successfully source and validate components and systems for production.
Releases component/subsystem to meet system requirements
Participate in Vehicle Compartment Integration Team (VCIT) meetings to resolve packaging issues and use NX Motion to articulate steering components for packaging studies.
Work with engineers responsible for interfacing systems, subsystems, and components to ensure that steering components will fit, form, and function with other components as a whole vehicle.
Collaborate with Warranty Engineers to improve architecture quality.
Perform appropriate studies and alternatives, such as benchmarking competitor original equipment manufacturer (OEM) steering systems and components, recommend program direction based on cost, mass, and timing, and brainstorm ideas that will reduce cost and mass.
Stays abreast of new technology
Translates lessons learned into best practices
Communicates information to and from internal and external customer organizations

Your Skills & Abilities

Basic Skills Required

Understanding of engineering theory and principles of design
Oral and written communication skills
Demonstrated ability to work independently and with others
Working knowledge of various steering types and their components.
Understanding of steering dynamics and kinematics and key interfaces.
Basic understanding of steering performance requirements
Basic ability to review steering math and its articulation data in GM CAD system
High level of analytical ability where problems are unusual or difficult
Familiarity with manufacturing processes
Expert on engineering operations, processes, and best practices
Demonstrated skills on CAD and CAE (NX CAD) and TeamCenter
Bachelor of Science in Engineering: Mechanical or Electrical (required)
Training in computer applications for CAD and CAE
This position requires legally operating a motor vehicle on a daily basis

What Will Give You a Competitive Edge

3+ years’ experience in Steering or Suspension Systems, including knowledge of related federal and global regulations, and knowledge of industry trends.
Experience working in very early vehicle design and development.
Ability to create refined NX CAD data, independent of a Designer, when necessary..
DFSS Black Belt Certification
Manufacturing experience with Steering components
Steering Release Experience

GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc).

This role is categorized as hybrid. This means the selected candidate is expected to report to a specific location at least 3 times a week {or other frequency dictated by their manager}.

The selected candidate will be required to travel <25% for this role.

Relocation benefits are available for candidates who qualify under company policy.

About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.

Why Join Us We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team.

Benefits Overview From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources.

Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers.

All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws.

We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire.

Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Apply About employer

More about this job

Skills

Design process
Collaboration
Data engineering
Estimating
HVAC
Siemens NX
Siemens Teamcenter
Design package
Packaging
Brainstorm ideas
Communication skills
Work independently
Manufacturing processes
Lean Six Sigma Black Belt
CPT
J

Report this job