Jobs in the United States

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 21 mins ago
O
Software Engineer, SMS Adapter
Ottimate
Remote, United States
- $160,000 to $180,000 USD / year
…reliability, and deployment experience that lets a non-technical store operator run it with…
Added 26 mins ago
A
Bindery Machine Operator
Aerotek
Cockeysville, MD
- $20 to $26 USD / hour
Ability to coordinate multiple machine workstations on a single bindery line to ensure consistent, high-quality output.
Added 2 hours ago
CNC Turner / Setter / Operator
Rheinmetall
Telford, PA
Checking and measuring the finished components according to technical specifications and/or test plans, including regular worker self-checks during each production step
Added 2 hours ago
CG
Road Saw Operator
Centuri Group, Inc.
Bethel Park, PA
- $34.23 USD / hour
Operate circular saw to cut concrete or asphalt along marked line to facilitate installation and repair of utility systems and equipment
Added 2 hours ago
A
General Production Worker
Aerotek
Crystal Lake, IL
- $17 to $17.5 USD / hour
…DescriptionThis role involves working at the end of a production line in a clean, well-lit, temperature-controlled medical packaging environment, where you will assist / operate a slitter…
Added 2 hours ago
FIREFIGHTER
Military Staff
United States
Must possess at least one (1) year experience as a firefighter and be IFSAC or ProBoard certified as a Firefighter II
Added 3 hours ago
Machine Operator
Henkel group
Bowling Green · Bowling Green, KY, KY
Manage line performance and priorities related to designated equipment related to the Liquids machines. This includes operation of the automatic descrambler, capper, rotary and heat…
Added 3 hours ago
A
Machine Operator
Aerotek
Waukesha, WI
- $20 to $22 USD / hour
Job Title: Machine Operator Pay: $22/hrShift: 1st, 2nd, or 3rd shiftJob DescriptionThe Dairy Processing Operator plays a key role in safely and efficiently operating sleeving, bottling, and…
Added 3 hours ago
A
Forklift Operator And Material Handler
Aerotek
Southaven, MS
- $19 to $19.5 USD / hour
Job Title: Forklift Operator and Material HandlerJob DescriptionThis role involves safely operating reach trucks, order pickers, and sit-down forklifts to support daily warehouse operations…
Added 4 hours ago
Senior Operator - Utility Line Maintenance (Hiring Incentive: $2,500)
LEWISVILLE-CITY OF
Lewisville, TX
Must possess a valid State of Texas Drivers License Class C and good driving record as defined by City policy
Added 4 hours ago
Infrastructure Technical Program Manager, Global Connectivity Infrastructure Delivery - Fiber Deployment
Amazon
Austin, TX
Physical Audits: Audits completed construction, reviews fiber test results, and hands off deliverables to internal customers
Added 4 hours ago
DCC Operator I - Midwest
Duke Energy Business Services, LLC
Plainfield, IN
Ability to work in a 24 X 7 rotating shift schedule
Added 5 hours ago
A
Production Operator 1
Aerotek
Salt Lake City, UT
- $43,680 to $45,760 USD / year
DAY SHIFT AND NIGHT SHIFT AVAILABLE: 6:45am-7pm or 6:45pm-7am · Shift Differential of $1.00 for night shift
Added 5 hours ago
O
Dispatcher
Omnitrans
San Bernardino, CA
- $6,034.89 to $9,052.38 USD / month
Coordinates and dispatches all bus operator assignments for revenue service, special events, and emergency response; type and number of buses required for dispatch; determines operating…
Added 6 hours ago
VI
Product Line Leader, Direct-to-Vehicle (D2V Automotive Connectivity)
Viasat, Inc.
Carlsbad, CA · Remote (excluding ND, VT, or RI)
- $280,500 to $420,500 USD / year
We are looking for a founder-minded business builder to launch and lead our Direct-to-Vehicle (D2V) product line, bringing resilient satellite connectivity to the automotive market. Most…
Added 7 hours ago
Production Supervisor - Back Half Day (BHD) , Amazon Leo
Amazon Kuiper Manufacturing Enterprises LLC
Kirkland, WA
Amazon Leo is seeking a Production Supervisor to join the Space Simulation Test Lab to support production on the Wednesday-Saturday 5:00am-3:30pm shift. This role will work closely with…
Added 7 hours ago
CO
SCADA Technician - Wastewater Treatment Plant
City of Round Rock
Round Rock, TX
- $26 to $37.5 USD / hour
Diagnose and repair issues using schematic drawings, monitoring tools, and digital test equipment
Added 8 hours ago
A
Blending Operator
Aerotek
Richmond, CA
- $25 USD / hour
Job Title: Blending OperatorJob DescriptionWe are seeking a dedicated Blending Operator to join our team. This role involves a variety of tasks including dock inspections, assisting with…
Added 8 hours ago
A
Production Operator
Aerotek
San Diego, CA
- $19 to $19.76 USD / hour
Mira MesaJob DescriptionAs a Cleanroom Production Operator in the cartridge department, you will help manufacture a disposable cartridge component that stores insulin and integrates with an…
Added 9 hours ago
A
Production Line Worker
Aerotek
Wilkes Barre, PA
- $22 to $25 USD / hour
Job DescriptionThe Production Line Worker operates, adjusts, tests, and maintains printing equipment on an overnight 12-hour shift from 7:00 p.m · Willingness and ability to work overnight 12-hour shifts (7 p.m.7 a.m.) on a 4x2 rotating schedule, including every other weekend
Added 10 hours ago
RT
Coach Operator INTERNAL APPLICANTS ONLY
RIVERSIDE TRANSIT AGENCY
Riverside, CA
- $29.42 USD / hour
Applicants must be available to work 7 days per week, including holidays and all shifts.ESSENTIAL DUTIES/RESPONSIBILITIES · Must have successfully completed the 120-day probationary period
Added 10 hours ago
Press Brake Operator - 2nd Shift
Henny Penny Corporation
Eaton, OH
The Entry Press Brake Operator role is responsible for independently setting up tooling to bend and form various types of metal to standard for production line use.
Added 10 hours ago
HQ Global Process Engineering Authority - Assembly, Functional Testing, Facility
GE Vernova International LLC
United States
…teams focus on the implementation of specific assembly lines or test stands (point solutions), this HQ GPEA owns the foundational standards that govern how products are mechanically built,…
Added 11 hours ago
CM
Metal Fab Technician - Paint & Wash
Central Moloney
Panama City, FL
- $20 USD / hour
2 years of manufacturing facility experience required
Added 11 hours ago
A
Machine Operator - Reading, PA - 1st & 2nd Shift
Aerotek
Reading, PA
- $22.72 USD / hour
Job Title: Machine Operator Production (Rotating and Fixed Shifts)Job DescriptionThis role operates production machinery to safely produce and finish high-quality cast molded products in a…

Ferrara

Welder I

United States

Apply on terex.wd1.myworkdayjobs.com About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 9, 2026

Original job description

Ferrara/KME are premiere manufacturers of fire trucks and emergency response vehicles offering a full line of pumpers, aerials, industrial, wildland, and rescue apparatus. Working hands-on with both municipal and industrial fire departments, the Ferrara/KME team thrives on diagnosing departments' current apparatus limitations and response needs to custom design the perfect fire apparatus solution that will stand the test of time.

Ferrara/KME is part of Terex Corporation, a global designer and manufacturer of specialized vehicles and equipment, including fire and emergency vehicles, waste and recycling equipment, RV's, and machinery supporting construction, utilities, and infrastructure. With operations across the U.S. and globally, we are committed to safety, innovation, and quality while building products our customers depend on every day.

SCOPE Perform welds on components to exacting specifications as part of the manufacture of large, custom, special-purpose vehicles, working within the limits of standard or accepted practice.

ESSENTIAL FUNCTIONS

Work from shop orders, specifications, prints, and instructions.
Review material and product requirements; ensure that parts are cut and prepared as prescribed.
Set parts in assembly fixtures; position, lay out, and clamp in place in the specified orientation to ensure dimensional accuracy. Select welding parameters per specified weld procedures. Work in teams and follow work instructions to ensure that heat is contained in a limited area to minimize unit distortion. Fit, tack, and weld joints in specific locations using designated welding procedure specifications and configurations to ensure compliance with weld size, weld continuity, fill, distortion, and cosmetic requirements.
Manipulate large, heavy units as required to accommodate efficient welding operations.
Make visual and dimensional checks of work and document as required. Move work to the succeeding work area to maintain workflow. Notify the supervisor of unusual equipment or operating problems.
Support training and orientation programs for new and transferring employees and report on results.
The welder is solely responsible for his or her weld quality, which will be inspected by the Ferrara Quality Department, coworkers, or an outside third-party agency. The company will utilize audits and operator quality tracking to ensure consistency in the quality of welds at Ferrara.

TOOLS AND EQUIPMENT USED

Hand tools
Hand power tools
Tape measure
Level
Welding machines
Fixtures
Overhead cranes

POSITION EXPECTATIONS

SAFETY: Follow Ferrara General Health & Safety Rules, ensure safe operating conditions within the area of responsibility, and notify coworkers and supervisors of hazardous acts and conditions. Properly use PPE and use only defect-free equipment. Promote safety in the department. Use proper lifting techniques and an overhead hoist when needed. Maintain a clean and safe working environment in line with the 5-S Philosophy. Participate in hazardous communication training and safety meetings.
QUALITY: Responsible for the quality of work. This requires defect-free work and an understanding of the requirements of the company’s quality system as it pertains to job duties and responsibilities. Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards. Identify and segregate non-conforming products. Identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate. Follow the 3 Don’ts:

Don’t accept poor quality.
Don’t make poor quality.
Don’t pass poor quality.

FLEXIBILITY: Able and willing to work in other areas as needed. Must be flexible in taking lunch and breaks when workflow requires. Willing to work additional hours as necessary.
INITIATIVE: Actively participate in the continuous improvement of products and processes to better serve customers and improve the overall profitability of Ferrara. Actively seek out work in other areas when the current assignment is complete. Make suggestions for improving product quality, processes, safety, and company profitability. Submit implemented improvements utilizing the Minor Kaizen process.
TEAMWORK: Maintain a positive working attitude toward other employees and be a team player. Work with others constructively and abide by company policies and procedures. Working together as a team for continuous improvement is vital to ensure the future of Ferrara and its employees. Teamwork will be required to be effective in daily production assignments as well as special improvement projects.
LEAN: Daily utilize your skills and experience to eliminate waste and continually improve your process. Additionally, develop your knowledge of Lean by supporting your area in maintaining the highest levels of 5S; utilizing visual management tools that highlight problems and solving those problems for true root cause; participating in and supporting Kaizen events; and participating in the Lean Certification and Minor Kaizen programs.
CAREER DEVELOPMENT: Attend and participate in a variety of meetings, training programs, and task force groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain a specific level of knowledge pertaining to changes to equipment or processes, new developments, requirements, procedures, and policies. Work toward obtaining your Bronze Lean Certification.
LEADERSHIP: Lead the team and provide innovative thought leadership on strategies to grow market share, increase profitability, and meet long-term business goals.
ACTION-ORIENTED: Enjoy working hard; be action-oriented and energetic; not fearful of acting with a minimum of planning; seize more opportunities than others.
CONFLICT MANAGEMENT: Step up to conflicts, seeing them as opportunities; read situations quickly; be good at focused listening; hammer out tough agreements and settle disputes equitably; find common ground and gain cooperation.
DEALING WITH AMBIGUITY: Effectively cope with change; shift gears comfortably; decide and act without having the total picture; remain comfortable when things are up in the air; move forward without having to finish one thing before moving on; comfortably handle risk and uncertainty.
DRIVE FOR RESULTS: Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; is very bottom-line oriented; steadfastly pushes self and others for results.

MINIMUM REQUIREMENTS

Basic welding knowledge that includes experience or training in GMAW processes.
Knowledge of Lean methodologies.
Ability to read and understand basic assembly prints and weld symbols.

PHYSICAL REQUIREMENTS

Lift/Push/Pull: Exerting up to 40 pounds of force frequently and/or up to 20 pounds of force constantly to move objects.
Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms.
Stooping: Bending the body downward and forward by bending the spine at the waist.
Kneeling: Bending legs at the knee to come to rest on the knee or knees.
Crouching/Crawling/Reaching: Bending the body downward and forward by bending the legs and spine; moving about on hands and knees or hands and feet; extending hand(s) and arm(s) in any direction.
Standing: Particularly for sustained periods of time.
Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another.
Visual Acuity: The worker is required to have visual acuity to perform activities such as operating machines, including lathes, drill presses, power saws, and mills, where the seeing job is at or within arm’s reach; performing mechanical tasks of a non-repetitive nature, such as carpentry, technical work, service work, plumbing, painting, and mechanical work; and operating motor vehicles or heavy equipment.
Hazards: The worker is subject to a variety of physical conditions and hazards, including proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and in high places, exposure to high heat, and exposure to chemicals.

Terex Corporation is committed to a policy of equal employment opportunity. The Company conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran's status, pregnancy, genetic information, sexual orientation, or any other basis prohibited by law. Terex Corporation also undertakes affirmative action to assure equal employment opportunities for minorities and women, for persons with disabilities, and for protected veterans.

NOTICE FOR CALIFORNIA RESIDENTS

Effective January 1, 2020, pursuant to the California Consumer Privacy Act of 2018 (as amended, the "CCPA"), if you are a California resident, you may have certain additional rights. Please click on the link for a description of those rights and how California residents may exercise them.

Apply on terex.wd1.myworkdayjobs.com About employer

More about this job

Skills

Product comprehension
Assembly
Welding
Work in teams
Regulatory compliance
Workflow
Control engineering
Teamwork
Carpentry
Plumbing
Painting
Heavy equipment operation
Electrical discharge

Report this job

Work requirements

Jobs in the United States