Jobs in the United States

25+ jobs

Save this search

Added 6 mins ago
A
Production Mill Operator
Aerotek
Ottawa, OH
- $22 USD / hour
As a Production Operator, you will play a crucial role in the operation and maintenance of various machines and equipment within the facility. Your responsibilities will include operating…
Added 6 mins ago
A
Sit Down Assembler - ALL SHIFTS
Aerotek
Bedford Heights, OH
- $19 to $20 USD / hour
…considered for various positions within production, including gluing operator, shelling cables, and housing cable assembly. The skill sets required for these positions are similar, and…
Added 6 mins ago
AI
Tech Service Specialist - Lamination Adhesives Job
Arkema Inc
Powell, OH
- $70,000 to $90,000 USD / year
Are you a Production or Manufacturing Operator looking to move into a customer-facing role with growth potential? **** Apply now and start building a long-term career with us! **** Work a…
Added 6 mins ago
AI
Tech Service Specialist - Lamination Adhesives Job
Arkema Inc
Powell, OH
- $70,000 to $90,000 USD / year
Are you a Production or Manufacturing Operator looking to move into a customer-facing role with growth potential? **** Apply now and start building a long-term career with us! **** Work a…
Added 6 mins ago
AI
Tech Service Specialist - Lamination Adhesives Job
Arkema Inc
Powell, OH
- $70,000 to $90,000 USD / year
Are you a Production or Manufacturing Operator looking to move into a customer-facing role with growth potential? **** Apply now and start building a long-term career with us! **** Work a…
Added 6 mins ago
Forklift Operator - 12hr. Night Shift - Starting at $22.35/hr.
Graham Packaging Company
Fremont, OH
…truck operating duties to stack, transport, and store work-in-process and finished goods. Supplies production lines with efficient flow of materials – knockdowns and dividers - and moves…
Added 6 mins ago
A
Hiring Machine Operators, Start Immediately
Aerotek
Troy, OH
- $18 to $20 USD / hour
Ability to work independently on a production line while maintaining focus and attention to detail.
Added 6 mins ago
Production Operator
H B FULLER COMPANY
Twinsburg, OH
…located at 9051 Dutton Drive, Twinsburg, OH 44087. Production Operator Twinsburg, OH / On-Site 1st Shift - 6am - 2:30pm Position Overview: The Production Operator reports to the Production…
Added 7 mins ago
Production Operator
H B FULLER COMPANY
Cincinnati, OH
…more at www.hbfuller.com. Join H.B. Fuller as a Production Operator - Location: Blue Ash, Ohio (On-Site) - Schedule: All shifts available - Pay: $23.00 per hour + $2.00 shift differential…
Added 7 mins ago
D
Director. Compliance & Safety, Road Transport, US
DSV
Lancaster, TX
- $140,000 to $175,000 USD / year
Establish a fair, consistent driver safety scorecard and progressive coaching and accountability process in partnership with Operations and P&O.
Added 7 mins ago
A
Hiring Immediately- General Production Worker
Aerotek
Columbus, OH
- $21 to $22 USD / hour
Ability to work on a production line and meet production targets.
Added 7 mins ago
A
Hiring- General Production Worker
Aerotek
Columbus, OH
- $21 to $22 USD / hour
Ability to work on a production line and meet production targets.
Added 7 mins ago
A
Hiring Immediately- General Production Worker- $21-$22/hr
Aerotek
Columbus, OH
- $21 to $22 USD / hour
Ability to work on a production line and meet production targets.
Added 39 mins ago
Gate Attendant/Scale Operator - NV Union
REPUBLIC SILVER STATE DISPOSAL, INC.
Henderson, NV
POSITION SUMMARY: A Gate Attendant/Scale Operator is responsible for accurately and efficiently monitoring and recording waste volumes entering the post collection site, as well as…
Added 55 mins ago
Production Operator
Land O'Lakes Inc
Fort Worth, TX
In this role, you will be a key member of our Land O’Lakes, Inc. manufacturing team, performing front-line production processes that add value and quality to the inputs and creation of…
Added 1 hour ago
S
Brake Press-Swing Shift-4/10's Precision Artist
Spherion
Spokane, WA
- $20 to $26 USD / hour
…precision of our swing shift manufacturing team. As our Brake Operator, you aren't just pressing buttons-you are the architect of form, taking raw sheets and bending them into the backbone…
Added 1 hour ago
GC
Part Time Instructional Program Specialist - Math Lab
Gavilan College (CA)
Gilroy, CA
- $28.47 to $35.3 USD / hour
- Part-time
Turns on, sets up and monitors learning assistance equipment; performs operator;
Added 1 hour ago
TREATMENT PLANT OPERATOR I
City of Amarillo
United States
Makes periodic rounds of the plant to assure that the plant process is operating properly.
Added 2 hours ago
Landfill Heavy Equipment Operator
Republic Services
Frankfort, IN
POSITION SUMMARY: The Operator – Heavy Equipment is responsible for the safe operation of heavy equipment at a recycling center, landfill or transfer station for the purpose of…
Added 2 hours ago
SR
Field Service Technician – Engine Specialist, Kershaw, SC
SMC Region USC
TN
- $35 to $45 USD / hour
…equipment (Surface top hammer, rotary and DTH drill rigs) in line with OEM specifications and customer maintenance…
Added 2 hours ago
Welder II
Smeal SFA
United States
…innovator of custom fire apparatus. The company offers a full line of custom and commercial pumpers, rescue pumpers, aerial ladders, and urban interface vehicles. Smeal is committed to…
Added 2 hours ago
Welder III
E-ONE
United States
…outside third-party agency. The company will utilize audits and operator quality tracking to ensure consistency in quality of welds, at…
Added 3 hours ago
CF
PVD Coatings - 1st Shift Machine Operator
California Faucets Inc
Huntington Beach, CA
- $21.5 USD / hour
California Faucets is looking to bring on a PVD - 1st Shift Machine Operator. This role is based on-site in our Huntington Beach, CA facility. The hours for this position will be Monday…
Added 3 hours ago
SP
Dry Film Operator- Trainee
Sierra Proto Express
Sunnyvale, CA
- $20 to $24 USD / hour
The Dry Film Operator Trainee is responsible for processing printed circuit boards (PCB) panels thru various dry film/lamination processes according to the travelers or as directed by…
Added 3 hours ago
Pilot Plant Technologist
ROHM & HAAS CHEMICALS LLC
Collegeville, PA
Dow Performance Monomers R&D has an exciting opportunity for a Pilot Plant Operator located in Collegeville, PA. You will support laboratory projects including working shifts on a 24/7…

Ferrara

Welder I

United States

Apply About employer

Applications open in a new tab.

Job details

Posting language: English
Posted: Nov 2, 2026

Original job description

Ferrara/KME are premiere manufacturers of fire trucks and emergency response vehicles offering a full line of pumpers, aerials, industrial, wildland, and rescue apparatus. Working hands-on with both municipal and industrial fire departments, the Ferrara/KME team thrives on diagnosing departments' current apparatus limitations and response needs to custom design the perfect fire apparatus solution that will stand the test of time.

Ferrara/KME is part of Terex Corporation, a global designer and manufacturer of specialized vehicles and equipment, including fire and emergency vehicles, waste and recycling equipment, RV's, and machinery supporting construction, utilities, and infrastructure. With operations across the U.S. and globally, we are committed to safety, innovation, and quality while building products our customers depend on every day.

SCOPE:

Perform welds on components to exacting specifications, as part of the manufacture of large, custom, special purpose vehicles, working within the limits of standard or accepted practice.

ESSENTIAL FUNCTIONS:

Work from shop orders, specifications, prints and instructions.
Review material and product requirements; ensure that parts are cut and prepared as prescribed.
Set parts in assembly fixture, position, layout and clamp in place in specified orientation to ensure dimensional accuracy. Select welding parameters per specified weld procedures. Work in teams and follow work instructions to ensure that heat is contained in limited area to minimize unit distortion. Fit, tack, and weld joints in specific locations with designated welding procedure specifications and configuration to ensure compliance with weld size, weld continuity, fill, distortion and cosmetic requirements.
Manipulate large, heavy units as required to accommodate efficient welding operations.
Make visual and dimensional check of work and document as required. Move work to succeeding work area to maintain workflow. Notify supervisor of unusual equipment or operating problems.
Support training and orientation programs for new and transferring employees and report on results.
The welder is solely responsible for his or her weld quality, which will be inspected by the Ferrara Quality Department, co-workers or an outside third party agency. The company will utilize audits and operator quality tracking to ensure consistency in quality of welds at Ferrara.

TOOLS AND EQUIPMENT USED:

Hand and hand power tools, tape measure, level, welding machines, fixtures, overhead cranes.

POSITION EXPECTATIONS:

SAFETY: Follow Ferrara General Health & Safety Rules, ensure safe operating conditions within area of responsibility, and notify coworkers and supervisors of hazardous acts and conditions. Proper use of PPE; use only defect-free equipment. Promote safety in department. Use proper lifting techniques and overhead hoist when needed. Maintain clean and safe working environment in line with 5-S Philosophy. Participate in hazardous communication training and safety meetings.
QUALITY: Responsible for the quality of work. This requires defect-free work and understanding of the requirements of the company’s quality system as it pertains to job duties and responsibilities. Must be able to check work to ensure conformance to process control instructions, specifications, and quality standards. Identify and segregate non-conforming product. Identify the need for and assist in initiating and implementing corrective and preventive actions when appropriate. Follow the 3 Don’ts: 1) Don’t accept poor quality; 2) Don’t make poor quality; 3) Don’t pass poor quality.
FLEXIBILITY: Able and willing to work in other areas as needed. Must be flexible in taking lunch and breaks when workflow requires. Willing to work additional hours as necessary.
INITIATIVE: Actively participate in continuous improvement of products and processes to better serve customers and improve the overall profitability of Ferrara. Actively seek out work in other areas when current assignment is complete. Make suggestions for improving product quality, processes, safety, and company profitability. Submit these implemented improvements utilizing our Minor Kaizen process.
TEAMWORK: Positive working attitude toward other employees; be a team player. Work with others constructively and abide by company policies and procedures. Working together as a team for continuous improvement is vital to ensure the future of Ferrara and its employees. Teamwork will be required to be effective in daily production assignments as well as special improvement projects.
Lean: To daily utilize your skills and experience to eliminate waste and continually improve your process. Additionally, develop your knowledge of Lean through supporting your area in maintaining the highest levels of 5S; utilizing visual management tools that highlight problems and solve those problems for true root cause; participate and support kaizen events; and participating in the Lean Certification and Minor Kaizen programs.
CAREER DEVELOPMENT: Attend and participate in a variety of meetings, training programs, and task force groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specific level of knowledge pertaining to changes to equipment or process, new developments, requirements, procedures, and policies. Work towards obtaining your Bronze Lean Certification.
LEADERSHIP: Lead the team, provide innovative thought leadership on strategies to grow market share, increase profitability, and meet long-term business goals.
ACTION-ORIENTED: Enjoy working hard; is action-oriented and energetic; not fearful of acting with a minimum of planning; seize more opportunities than others.
CONFLICT MANAGEMENT: Step up to conflicts, seeing them as opportunities; read situations quickly; good at focused listening; can hammer out tough agreements and settle disputes equitably; can find common ground and get cooperation.
DEALING WITH AMBIGUITY: Can effectively cope with change; can shift gears comfortably; can decide and act without having the total picture; isn’t upset when things are up in the air; doesn’t have to finish things before moving on; can comfortably handle risk and uncertainty.
DRIVE FOR RESULTS: Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes self and others for results.

MINIMUM REQUIREMENTS:

Basic welding knowledge that includes experience or training in GMAW processes.
Must be knowledgeable in Lean Methodologies.
Must also have the ability to read and understand basic assembly prints and weld symbols.

PHYSICAL REQUIREMENTS:

Lift/Push/Pull- Exerting up to 40 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects.
Climbing- Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms.
Stooping- Bending body downward and forward by bending spine at the waist.
Kneeling- Bending legs at knee to come to a rest on knee or knees.
Crouching/Crawling/Reaching - Bending the body downward and forward by bending leg and spine. Moving about on hands and knees or hands and feet. Extending hand(s) and arm(s) in any direction.
Standing- Particularly for sustained periods of time.
Walking- Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another.
The worker is required to have visual acuity to perform an activity such as: operating machines such as lathes, drill presses, power saws and mills where the seeing job is at or within arm’s reach; performing mechanical tasks of a non-repetitive nature such as carpenters, technicians, service people, plumbers, painters, mechanics, etc. The worker is required to have visual acuity to operate motor vehicles or heavy equipment
The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.

Terex Corporation is committed to a policy of equal employment opportunity. The Company conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran's status, pregnancy, genetic information, sexual orientation, or any other basis prohibited by law. Terex Corporation also undertakes affirmative action to assure equal employment opportunities for minorities and women, for persons with disabilities, and for protected veterans.

NOTICE FOR CALIFORNIA RESIDENTS

Effective January 1, 2020, pursuant to the California Consumer Privacy Act of 2018 (as amended, the "CCPA"), if you are a California resident, you may have certain additional rights. Please click on the link for a description of those rights and how California residents may exercise them.

Apply About employer

Report this job