Jobs in the United States

25+ jobs

Save this search

Added just now
G
Mechanical Engineer
GPAC
Tampa, FL
- $65,000 to $90,000 USD / year
Under the direction of the Director of Engineering, the Mechanical Engineer (ME) designs and develops mechanical systems and components that meet customer requirements, industry standards,…
Added just now
G
Mechanical Engineer
GPAC
Tampa, FL
- $65,000 to $90,000 USD / year
Under the direction of the Director of Engineering, the Mechanical Engineer (ME) designs and develops mechanical systems and components that meet customer requirements, industry standards,…
Added 1 min ago
FEP TPS Engineer - E3
Applied Materials, Inc
Phoenix, AZ
…support and documentation to field engineers, technicians and product support personnel who are diagnosing, troubleshooting, repairing and debugging…
Added 1 min ago
G
Mechanical Engineer
GPAC
Tampa, FL
- $65,000 to $90,000 USD / year
Under the direction of the Director of Engineering, the Mechanical Engineer (ME) designs and develops mechanical systems and components that meet customer requirements, industry standards,…
Added 1 min ago
G
Mechanical Engineer
GPAC
Tampa, FL
- $65,000 to $90,000 USD / year
Under the direction of the Director of Engineering, the Mechanical Engineer (ME) designs and develops mechanical systems and components that meet customer requirements, industry standards,…
Added 1 min ago
G
Mechanical Engineer
GPAC
Tampa, FL
- $65,000 to $90,000 USD / year
Under the direction of the Director of Engineering, the Mechanical Engineer (ME) designs and develops mechanical systems and components that meet customer requirements, industry standards,…
Added 6 mins ago
Principal Engineer Quality (CMM)
CORP-Corporate Office
United States
Northrop Grumman Mission Systems is seeking a talented Principal Engineer Quality (CMM) located in Rolling Meadows, IL.
Added 6 mins ago
2027 Associate Engineer / Engineer Aeronautical - WAFB MO
CORP-Corporate Office
United States
Analyzes, researches, and develops structural engineering analysis packages involving metals or composite structural materials for product design or operation of product.
Added 6 mins ago
Manufacturing Engineer
CORP-Corporate Office
United States
…ensure technical, schedule, and cost objectives are met, and product quality is maintained. In this role, you will provide guidance regarding design concepts, directly support, and ensure…
Added 6 mins ago
Engineer Quality
CORP-Corporate Office
United States
We are looking for you to join our Northrop Grumman Mission Systems team as a Quality Engineer based out of San Diego, CA (Rancho Carmel).
Added 6 mins ago
EMI/C Systems Engineer - Level 3 or 4 (AHT)
CORP-Corporate Office
United States
Northrop Grumman’s Space Systems Sector is seeking an EMI/C Systems Engineer – Level 3 or 4 to join our team in Gilbert, AZ. This position can be filled at either Level 3 Principal Systems…
Added 6 mins ago
EMI/C Systems Engineer - Level 2 (AHT)
CORP-Corporate Office
United States
Northrop Grumman’s Space Systems Sector is seeking an EMI/C Systems Engineer – Level 2 to join our team in Gilbert, AZ.
Added 6 mins ago
G
Mechanical Engineer
GPAC
Riverview, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 6 mins ago
G
Mechanical Engineer
GPAC
Brandon, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 6 mins ago
G
Mechanical Engineer
GPAC
Tampa, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 7 mins ago
G
Mechanical Engineer
GPAC
Valrico, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 7 mins ago
G
Mechanical Engineer
GPAC
Apollo Beach, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 7 mins ago
G
Mechanical Engineer
GPAC
Ruskin, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 7 mins ago
G
Mechanical Engineer
GPAC
Plant City, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 7 mins ago
G
Mechanical Engineer
GPAC
Seffner, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 7 mins ago
G
Mechanical Engineer
GPAC
Gibsonton, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 7 mins ago
G
Mechanical Engineer
GPAC
Sun City Center, FL
- $80,000 to $85,000 USD / year
Seeking a Mechanical Engineer who enjoys taking custom equipment from first sketch to finished build. You'll partner with engineering, the shop floor and customers to turn ideas into…
Added 8 mins ago
G
Manufacturing Equipment Engineer
GPAC
Manhattan, KS
- $80,000 to $98,000 USD / year
Manufacturing Engineer • Equipment Engineer • Mechanical Engineer • Agricultural Equipment • Agricultural Machinery • Fabrication Equipment • Heavy Equipment • Product Design •…
Added 8 mins ago
AA
Product Manager, Incentives
Augeo Affinity Marketing, Inc.
St Paul, MN
- $125,000 to $152,000 USD / year
…scientists and engineers on model evaluation, prompting, and system design without being an ML engineer…
Added 9 mins ago
Project Engineer I
Marathon Petroleum Corporation
Dickinson, ND · Mandan, ND
RESPONSIBILITIES:• Applies project management skills across all phases: development, justification, design, construction, and start-up. Supports project documentation, data gathering, and…

Crestron Electronics

Model Maker

Rockleigh, NJ, United States

Per applicable state requirements, the annual pay range for this position ($50,500 - $70,500) which consists of base salary (subject to performance), reflects the hiring range for candidates.

Apply About employer

Applications open in a new tab.

Job details

Pay: Per applicable state requirements, the annual pay range for this position ($50,500 - $70,500) which consists of base salary (subject to performance), reflects the hiring range for candidates.
Experience: Qualification: Education: College, Technical School or High School; 3-5 years experience;
Posting language: English
Posted: Nov 5, 2026

Original job description

At Crestron Electronics, Inc we build the technology that integrates technology. We are proud to be the largest and most recognized brand in automation and control solutions, and the premier technology partner for fortune 500 businesses globally. Our products are integrated into new high-tech commercial buildings to include some of the most exciting real estate throughout the world. Our clients include Google, Microsoft, Amazon, LinkedIn and many others. We are the leaders in the most exciting industry in the world! Our automation and control solutions for homes and buildings allow our clients to control entire environments with the push of a button, integrating systems such as Audio Visual, Lighting, Shading, Security, Building Management Systems and HVAC to provide greater comfort, convenience and security. Crestron Electronics is looking for a creative individual to work in our high-tech engineering environment fabricating prototypes for design verification and other company needs. The prototype facility works primarily with metal and plastic materials to produce prototype parts and assemblies that become components for new product development. This is an exciting opportunity for a mechanically inclined, hands-on, detail oriented individual to learn varied skills and contribute to our growing organization. In this role the selected candidate will be trained to program, setup, and operate various shop equipment to produce precision parts and assemblies in short-run quantities. This work will require an innate talent for problem solving and technical skills in CAD. Candidate should be highly motived to learn the skills outlined below. Responsibilities include completing in-house training to operate the following shop equipment: High-pressure waterjet; Plastic Prototyping Equipment: SLA, FDM & Polyjet; Sheet metal forming and hardware insertion; Other power fabrication equipment; Finishing & painting of prototypes; CNC Press brake; Lathe; CNC Mill. Assist other members of the Prototype Shop staff with additional tasks: Assembly of test units; Construction and assembly of test fixtures; Rework of existing parts; Perform routine maintenance on equipment per department procedures. Additional Training: Reading of Technical Prints; Use of Calipers; Learning of CAD Software: Creo; Qualification: Education: College, Technical School or High School; 3-5 years experience; High mechanical aptitude needed to visualize 3D designs; Logical and Creative problem-solving skills; Ability to quickly learn new technical skills including software applications and equipment; Able to work in a fast-paced environment; Detail oriented, working to tight tolerances; Ability to work with minimal supervision; Be able to lift 40lbs. Qualifications below are an additional benefit: Experience with equipment listed in responsibilities section; Ability to read and understand technical prints; Ability to program in a CAD system to run shop equipment; HVLP/Air Brush Painting skills; CAD experience: Creo aka Pro Engineer (ProE) or Solidworks; Basic soldering skills and/or simple understanding of wiring; Wood Working (Table Saw, Chop Saw, Router); Spot Welding. Per applicable state requirements, the annual pay range for this position ($50,500 - $70,500) which consists of base salary (subject to performance), reflects the hiring range for candidates. Also note, an individuals offer may vary from this range as it may be impacted by additional factors, including but not limited to the candidate's hiring location, qualifications, experience, and market factors.

Apply About employer

Report this job