Job Summary
Perform material production tasks without any close supervision, using complex equipment and tools, preparing and testing of production/research samples for routine analysis. These activities primarily include the manufacturing of extruded ingot materials and secondarily including various substeps in a supporting role for additional ingot manufacturing processes. Employee will follow written procedures and established instructions.
Primary Duties & Responsibilities
• Preparation and Production of Extruded Ingot Materials
• Ingots are manufactured and delivered on time to internal and external customers by set-up and operation of ingot production steps
• Loading and unloading of ingots from furnaces for alloying and quenching of compounded raw materials in sealed containers.
• Heat Treatment Furnace operation for sintering and post extrusion process steps, with material prepared and heat treated with correct processing programs called out from various equipment controllers by loging in recalling the correct program
• Operation of Sand Blasting Cabinet to remove surface layer of material, including changing of abrasive media at regular intervals.
• Equipment preparation including the cleaning of growth chambers and extrusion dies, with the use of power tools required.
• Extrusion equipment operation including chamber to ram alignment and use of human machine interface controller.
• Use of sliding table wet cutoff saw for sectioning extruded materials for post extrusion processing.
• Consumables and supplies used in relevelant ingot manufacturing steps are continuously monitored and supervisor infomed for lack of such supplies to maintan sufficient levels
• Clean up and storage of set ups is done in a timely fashion upon completion of kits
• Ensure toos used in processes are calibrated and send to repair/calibration on time
• Removing, cutting, testing and grading of Ingot Materials
• Prepare ingots and ingot samples for testing of ingot properties and performance evaluation.
• Removal of ingots/billets from tubes and cut to correct lengths.
• Correctly mark and label ingots per established specifications and documentations.
• Measurement of ingot resistance properties and grade against the established specification.
• Prepare TE material samples through FE element processing steps to plate, dice, dismount to get them ready for thermoelectric property measurement using established procedures and grade against documented specification.
• Produce and support of other ingot production
• Cross train for preparation of Bridman ingot compounds as required by the schedule and deliver to alloying process
• Corss train and support sealing of quartz using Hydrogen - Oxygen torch, heat treatment and profiling aspect of Bridgman ingots when needed
• Ingot test samples are prepared and anlysis completed for material performance and evaluation
• Prepare ingots and pack for external and internal customer shipment per established procedure
• Support of the product realization processes
• Help R&D perform new ingot product development projects by performing some of the tasks related to the required processes
• Train other production personnel for his/her own primary responsibilities as well as be willing to train for other processes in the area as back up personnel to run production in case of urgent needs
• Coordinate with Maintenance group to perform accurate periodic profile verification of the ovens and document the results in formats set up by the Process Engineer
• Provide help to ingot production supervisory to perform accurate monthly material count and inventory for reporting to production control
• Help to stock raw material supplies from the warehouse as coordinated by the line supervisor
• Package and prepare materials to move to warehouse with correct labeling requirments for external customer shipment.
• Perform simple equipment maintenance and housekeeping tasks proactively
• Documentation and Business
• Accurate data entry on travelers and into process programs and into Kronos time keeping for hours charges
• Accurate and timely completion of all documentation according to the process
• Review/audit department processes for continuous improvement, cycle time and cost reduction opportunities
• Work as a part of a team or independently to perform functional testing of ingots and materials.
• Work with department personnel to meet department and company objectives
• Develop business and personal goals
• Special assignments are handled promptly and professionally
• Department processes are ISO9001 and ITAR compliant
• Other
• Additional production support activities include vacuum sealing of tubes using welding torch, preparing ingot for profiling, breaking of glass tubes and removal of ingots.
• Simple machining operations such as cutting, grinding and abrading processes, as well as testing and characterization of ingot electrical properties as in process qualify check for final release
• Ultimately grade and release material to production based on documented specifications, helping prepare documentation for ingot shipment to internal and external customer with proper identification of lot numbers.
• Individual may also support other production activities and special projects as assigned by the line supervisor, when trained by others
Education & Experience
• Minimum high school degree and industrial experience dealing with metal forming methods.
• 2+ years’ experience with operation of complex machinery and processes to product parts with minimal supervision.
• 2+ years applicable experience in manufacturing setting in relation to metal forming and testing of materials.
Skills & Other Requirements
• Ability to handle welding flame torch and loading/unloading hot tubes using PPE
• Ability to use crushers, grinders to make TE powders as well as operating complex hot forming and casting machinery
• Understanding of technical drawing and basic engineering principals
• Demonstrated ability to work independently and in a timely manner.
• Hands on and very direct approach to problems and needs of production demand.
• Ability to anticipate and handle multiple priorities involving external and internal priorities under time constraints.
• Ability to pay attention to details of processes and tools used in processes.
• Ability to excel in a cross-organizational, cross-cultural, global team environment.
• Proven ability to work with people as well as training of operators.
• Excellent interpersonal, and communication skills.
• Proficient computer skills, experience with Word, Excel, Outlook, PowerPoint, Email, internet access.
Working Conditions
Good working conditions. Some exposure to noise, dust, heat, etc. Some element present which makes conditions less desirable than usually found in an office.
Physical Requirements
Ability to lift 10kg of metal in sealed containers
Must be able to wear proper PPE for the area (safety glasses, finger cots, gloves)
Must be able to remain in a stationary position, often standing or sitting for prolonged periods.
Must be able to communicate clearly and effectively with others to exchange information
Position requires repeating motions that may include the wrist, hands and/or fingers
Safety Requirements
All employees are required to follow the site EHS procedures and Coherent EHS standards.
Appropriate PPE must be worn in the area.
Quality & Environmental Responsibilities
Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System.
Employees are required to maintain a quality work environment that is safe, clean, organized and environmentally compliant
Responsible for maintaining Quality Work Environment housekeeping standards for own work area and community areas
Culture Commitment
Ensure adherence to company’s values (ICARE) in all aspects of your position at II-VI:
Integrity – Create an Environment of Trust
Collaboration – Innovate Through the Sharing of Ideas
Accountability – Own the Process and the Outcome
Respect – Recognize the Value in Everyone
Enthusiasm – Find a Sense of Purpose in Work
EMPLOYEE ACKNOWLEDGEMENT
I have read the Job Description and fully understand the requirements set forth therein. I understand that this Job Description is not all-inclusive, and that I will be responsible for performing other duties as assigned. I further understand that this Job Description does not constitute an employment contract. I further understand that Coherent is an At-Will employer, and that my employment may be terminated by the Company or by myself at any time, and that such termination may occur with or without cause or notice.
Employee Signature:
Date:
Coherent is a global leader in lasers, engineered materials and networking components. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program. It's an exciting opportunity to work for a company that offers stability, longevity and growth. Come Join Us!
Note to recruiters and employment agencies: We will not pay for unsolicited resumes from recruiters and employment agencies unless we have a signed agreement and have required assistance, in writing, for a specific opening.