Find work in the United States.

A simpler way to find your next job.

Jobs in the United States

25+ jobs

Save this search

Added 3 mins ago
Director of Creative Technologies
UVA Health
Charlottesville, VA
…area within the External Relations Communications team: the design, development, and AI-enabled production of high-craft interactive digital experiences, tools, and systems that advance the…
Added 3 mins ago
Manufacturing Engineer
General Dynamics Mission Systems, Inc
Pittsfield, MA
…the operations/manufacturing organization. The Manufacturing Engineer will develop strong communications with internal teams to estimate manufacturing costs, determine time standards and…
Added 3 mins ago
AO
Big Data Specialist (Multiple Positions) | ZR_925_JOB
Agilisium Onshore
Westlake Village, CA
- $175,698 USD / year
…years of experience in the position offered, as a Software Engineer, or a related position. Must have five (5) years of experience with all of the following: Developing and optimizing data…
Added 4 mins ago
Transmission Engineer II - Power Delivery
WESTWOOD PROFESSIONAL SERVICES INC
Austin, TX
Westwood Professional Services, Inc. seeks a Transmission Engineer II to join our team. The Transmission Engineer II is primarily responsible for the cost-effective conceptual and…
Added 4 mins ago
Lead Transmission Engineer
Westwood Professional Services Inc
United States
Westwood Professional Services, Inc. is seeking a Lead Transmission Engineer to join our team in our team. Westwood has a highly experienced and dynamic team of individuals dedicated to…
Added 4 mins ago
Transmission Engineer II - Power Delivery
WESTWOOD PROFESSIONAL SERVICES INC
Lansdale, PA
Westwood Professional Services, Inc. seeks a Transmission Engineer II to join our team. The Transmission Engineer II is primarily responsible for the cost-effective conceptual and…
Added 4 mins ago
Transmission Engineer II - Power Delivery
WESTWOOD PROFESSIONAL SERVICES INC
Minnetonka, MN
Westwood Professional Services, Inc. seeks a Transmission Engineer II to join our team. The Transmission Engineer II is primarily responsible for the cost-effective conceptual and…
Added 4 mins ago
Principal Transmission Engineer
WESTWOOD PROFESSIONAL SERVICES INC
Austin, TX
Westwood Professional Services, Inc. is seeking a Principal Transmission Engineer to join our team in our team. Westwood has a highly experienced and dynamic team of individuals dedicated…
Added 4 mins ago
Principal Transmission Engineer
WESTWOOD PROFESSIONAL SERVICES INC
Minnetonka, MN
Westwood Professional Services, Inc. is seeking a Principal Transmission Engineer to join our team in our team. Westwood has a highly experienced and dynamic team of individuals dedicated…
Added 5 mins ago
Cognite Academy Engineer
Cognite - AI for Industry
United States
Contribute to standardized Academy content development processes, templates, quality standards, and design systems.
Added 5 mins ago
IVA Spacesuit Project Engineer
Mclaurin Aerospace
Houston, TX
Collaborate with multidisciplinary engineering teams, including systems, mechanical, electrical, thermal, materials, manufacturing, quality, safety, human factors, logistics, and test…
Added 6 mins ago
A
Project Engineer
AbbVie
North Chicago, IL
- $109,500 to $208,500 USD / year
Responsible for compliance with applicable policies and procedures. Ensures quality and effectiveness of key results of major projects within function through sound design, early risk…
Added 6 mins ago
Principal Engineer - Integration, Test, & verification
Firestorm
United States
Build and lead a cross-product integration, test, and verification capability for complex hardware/software/UAS systems. Own the integration and verification approach, test architecture,…
Added 7 mins ago
R
Software Engineer, Frontend
Ramp
New York City, NY · San Fransisco, CA · Miami, FL
- $200,000 to $310,000 USD / year
If you want to build systems that directly shape how companies move and manage billions, Ramp is the place to do it.
Added 7 mins ago
Sr AI & Automation Engineer
INSPYR Solutions
Deerfield Beach, FL
The Senior AI & Automation Engineer designs, builds, and operates AI-enabled automation solutions using Power Automate, Power Apps, Copilot Studio, and Copilot endpoints integrated with…
Added 7 mins ago
SS
Project Manager - MET
Sibanye Stillwater
Columbus, MT
- From $134,800 USD / year
…closeout. Projects must achieve approved safety, environmental, quality, cost, schedule, operability, and reliability outcomes while minimizing disruption to ongoing plant…
Added 7 mins ago
ELECTRONICS ENGINEER
U.S. Air Force - Agency Wide
Kirtland AFB, NM
…experiment instrumentation equipment. Responsibilities - Embedded Systems Validation and Integration: Computes and executes C/C++ programming on microcontrollers (bare-metal and/or RTOS) to…
Added 8 mins ago
RF Electrical Engineer (R&D Engineer 1/2)
Los Alamos National Laboratory
Los Alamos, NM
…Laboratory and the Nation providing the knowledge base and component design responsibilities for the Nuclear Weapons Program and other critical national security areas. The Group's…
Added 8 mins ago
R&D Engineer 1
Los Alamos National Laboratory
Los Alamos, NM
…centered on high-rigor manufacturing operations to produce high quality, safe, and reliable WR detonator products. DP partners with customers and stakeholders such as NNSA (National Nuclear…
Added 8 mins ago
Nuclear Facilities Engineer 2/3 (Mechanical Project Engineer)
Los Alamos National Laboratory
Los Alamos, NM
Manages the performance, configuration, and operability of nuclear facility systems and engineered safety features. Defines design requirements and ensures systems meet safety, quality, and…
Added 8 mins ago
Nuclear Facilities Engineer 1/2
Los Alamos National Laboratory
Los Alamos, NM
…matters, including all aspects of electrical safety, HVAC, power quality, fluid/utility systems, power monitoring, critical power reliability/redundancy issues, renovating rooms, modifying…
Added 8 mins ago
Systems R&D Engineer 2/3
Los Alamos National Laboratory
Los Alamos, NM
This is an opportunity to be part of the first new weapon system program in over 30 years. Q-20, W93/Mk7 Systems Development and Realization Group, defines, develops, and fields the warhead…
Added 8 mins ago
R&D Engineer 2/3
Los Alamos National Laboratory
Los Alamos, NM
…are considered the primary technical interface with the three design agencies and the NNSA stakeholders. Product Engineers focus on managing the technical requirements supporting…
Added 8 mins ago
Engineering Technologist 1/2
Los Alamos National Laboratory
Los Alamos, NM
Work closely with the lead production engineer on work associated with assembly.
Added 8 mins ago
Cleared Senior/Principal RD Systems Engineer - Mobile Guardian Transporter Quality, Hybrid
Sandia National Laboratories
Albuquerque, NM
We are seeking a highly motivated R&D Systems Engineer to join the MGT Quality team to support the Trailer Electronics team develop, implement, and maintain strategies to lead design and…

Cantrell - Gainco

Mechanical Engineer

Gainesville, GA, United States

Apply About employer

Applications open in a new tab.

Job details

Experience: Entry level: new graduate or up to 2 years of experience.
Posting language: English
Posted: Nov 4, 2026

Original job description

Position Summary

The Mechanical Engineer - Sustaining supports Cantrell-Gainco equipment throughout its life through engineer-to-order (ETO) processing, product life-cycle management, and continuous improvement. In this entry-level role, the engineer creates new designs and modifies existing designs, solves problems, and improves products and processes, applying sound engineering practices and principles with safety, quality, and the customer in mind.

Working with guidance from senior engineers and the Engineering Manager, the engineer plans and organizes assigned work, delivers accurate and complete results on time, and partners with manufacturing, quality, supply chain, service, and sales to keep customers’ equipment running well. Success depends as much on how the work is done (thoroughness, responsiveness, tenacity, work ethic, and professionalism) as on technical skill, and scope and independence grow as results are demonstrated.

All job requirements listed are requirements for the core responsibilities of this position. This position may require other activities and duties as assigned by their manager.

Key Responsibilities

Engineer-to-Order (ETO) Processing

Review customer orders and requirements, identify what is standard and what must be engineered, and clarify open questions early.
Configure, design, and modify equipment to order; create and release accurate drawings, bills of materials, and specifications on schedule.
Check every order package for completeness and accuracy before release: right part, right revision, right configuration.
Support manufacturing and assembly as questions arise during the build, and feed lessons learned back into standard designs.

Design & Modification

Create new designs and modify existing designs using 3D CAD, producing clean models and detailed drawings with appropriate GD&T, tolerances, and stack-ups.
Apply design for manufacturability, assembly, and serviceability, and hygienic design principles for washdown and food-processing environments; select materials and components suited to the application.
Favor simple solutions with fewer parts and less complexity, and know when “good enough” meets the requirement.

Product Life-Cycle Management

Prepare and manage engineering changes: define the change, assess impact (fit, form, function, cost, installed base, inventory), obtain approvals, release, and verify implementation.
Maintain configuration, revision control, and documentation accuracy in CAD/PDM and ERP systems, including as-built and as-fielded records.
Resolve component obsolescence and supplier-related technical issues; evaluate and qualify replacement parts and alternate sources.
Keep manuals, parts lists, and technical data current as products change.

Problem Solving & Product Support

Investigate production, field, service, and warranty issues; separate the real problem from the stated problem.
Learn and apply structured root-cause methods (e.g., 5 Whys, fishbone, 8D, TRIZ) to find causes rather than treat symptoms.
Develop corrective and preventive actions, then confirm with data that the fix worked and the issue does not return.
Provide timely technical support to manufacturing, service, sales, and customers, including on-site troubleshooting when needed.

Analysis, Verification & Validation

Perform engineering calculations, tolerance analyses, and basic FEA appropriate to the problem, and sanity-check results against hand calculations and physical reality.
State the requirement up front (for example, the factor of safety required for the load case, material, and duty cycle) and report whether the result meets it, with a clear conclusion and recommendation, not just a number.
Plan and run bench, shop, and field tests; document the method, results, and conclusions.
Separate what is known, what is assumed, and what still needs to be tested, and flag gaps before passing work along.

Continuous Improvement

Identify and implement improvements to product reliability, performance, cost, manufacturability, and serviceability, with priority on recurring failures.
Improve engineering processes (templates, checklists, standard work) and contribute lessons learned to engineering standards and best practices.
Participate in daily and visual management, and track measures such as change lead time, backlog aging, and repeat failures.

Planning, Teamwork & Professional Practice

Plan and prioritize assigned work, commit to realistic dates, deliver on them, keep status visible in the team’s tracking tools, and communicate schedule risk early.
Work effectively individually and in teams; give and accept constructive feedback in design reviews.
Follow safety, quality, and company procedures, and document decisions and rationale as work progresses.

Core Behaviors

How the work gets done matters as much as what is done. These behaviors are as important as technical skill and will be assessed in interviews, performance reviews, and development planning.

Behavior

What it looks like in this role

Planning & Organization

Breaks assignments into steps, sequences them by priority and the critical path, and sets realistic dates. Keeps a traceable thread from problem statement to hypothesis, test, result, and decision. Maintains version control and consistent naming on drawings, models, test data, and files.

Execution: Individually and in Teams

Self-directed: starts work without waiting for permission, owns the outcome end to end (not just a piece of the drawing), and finishes what is started. Shares knowledge, hands work off cleanly, and asks for help early.

Thoroughness & Quality

Checks own work before release: units, load cases, assumptions, revisions, and drawing and BOM accuracy. Asks "what have I missed?" and "what would make this wrong?" before reporting. Sanity-checks results against hand calculations and physical reality, and closes every analysis with a clear conclusion and recommendation.

Responsiveness

Acknowledges requests promptly, sets clear expectations on turnaround, and meets them. Keeps manufacturing, service, sales, and customers informed, and raises risks and delays early. Balances urgent production issues with planned work without dropping commitments.

Tenacity

Stays with hard problems. When an approach fails, returns with a new angle instead of repeating the same test. Works through unglamorous validation, edge-case, and documentation work, and through organizational friction (supplier responses, test time, approvals) to finish the job.

Work Ethic & Accountability

Dependable and self-motivated. Puts in the effort needed to meet commitments, owns mistakes openly, and corrects them without being prompted. Follows through, including on details no one will check.

Professionalism

Communicates clearly and respectfully in writing and in person. Explains technical reasoning simply to non-engineers. Documents decisions and the rationale behind them. Treats design review as a tool, not a threat. Acts with honesty and integrity, and puts safety first.

Problem Solving & Systems Thinking

Distinguishes the real problem from the stated problem. Breaks systems into functions and requirements, and understands how a part interacts with the larger machine (interfaces, tolerances, failure modes). Holds more than one hypothesis at a time and changes one variable at a time.

Pragmatism & Focus

Treats cost, schedule, and manufacturability as design constraints. Knows when "good enough" meets the requirement and favors solutions with fewer parts and less complexity. Says "not now" to tangents so the critical path holds, and protects time for focused work.

Curiosity & Learning

Learns quickly from the products, the shop floor, and the field. Prefers fast, low-cost tests that answer a question before committing to a full solution, and treats being wrong in testing as progress.

Required Qualifications

Bachelor’s degree in Mechanical Engineering, or a closely related engineering field, from an ABET-accredited program.
Entry level: new graduate or up to 2 years of experience. Internships, co-ops, capstone projects, and student design teams count.
Working knowledge of engineering fundamentals: statics, mechanics of materials, materials selection, and engineering drawings including GD&T basics.
Experience with a 3D CAD package (SolidWorks preferred) gained through coursework, internships, or projects.
Demonstrated ability to plan, organize, and deliver work on time, individually and as part of a team (for example, co-op deliverables or a capstone project).
Clear written and verbal communication skills in English; proficient in Microsoft Office (Word, Excel, and PowerPoint).

Preferred Qualifications

Internship or co-op experience in manufacturing, machine design, or product support.
Hands-on mechanical aptitude: machining, welding, sheet metal fabrication, assembly, or equipment repair.
Exposure to PDM, bills of materials, and ERP systems; SolidWorks certification (e.g., CSWA).
Exposure to FEA, tolerance stack-ups, structured problem solving (5 Whys, 8D, DFMEA), or statistical process control.
Familiarity with food, sanitary, or washdown equipment; basic knowledge of pneumatics, electrical, or controls.
Exposure to Lean or continuous improvement methods.

Measures of Success

Order packages (drawings, BOMs, specifications) released complete, accurate, and on time, with little rework.
Engineering changes carried through documented impact assessment, approval, release, and verified implementation.
Issues closed with a verified root cause and corrective action, and fewer repeat failures.
Prompt, clear communication with internal customers; commitments met, or renegotiated early.
Steady growth in technical skill, independence, and scope.

Physical Requirements

The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; and talk and hear. The employee is regularly required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Ability to work for extended periods of time at a workstation on a computer or similar device. Occasional extended periods of standing, bending, kneeling.

Working Conditions

This job operates in both an office setting and a manufacturing warehouse. This role routinely uses standard office equipment, hand tools, and material handling equipment. Travel: up to 10% as needed.

Employment with Cantrell-Gainco is contingent upon successfully completing both a pre-employment background check and a drug screening. All candidates hired must be able to provide proper documentation of their eligibility to work in the US (I-9 form). Cantrell-Gainco is an Equal Opportunity Employer – Minorities / Females / Disabled / Veterans (M/F/D/V)

Equal Opportunity Employer. This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor (https://www.eeoc.gov/poster).

Apply About employer

More about this job

Skills

Product life-cycle
Process improvement
Supply chain management
Sales
Assembly
Design principles
Food engineering
Documentation
ERP
Problem solving
Technical support
Troubleshooting
FEA
Engineering processes
Teamwork
Reporting
Meet commitments
Systems thinking
Mechanical engineering
Material mechanics
Dassault Systemes SolidWorks
Communication skills
Microsoft Office
Microsoft Word
Microsoft Excel
Microsoft PowerPoint
Machining
Welding
Statistical process control
Office equipment
Material handling
Employment law

Report this job