Find work in the United States.

A simpler way to find your next job.

Jobs in the United States

25+ jobs

Save this search

Added just now
NY
Animal Facility Manager
New York State Psychiatry Institute
New York, NY
- $116,994 to $139,388 USD / year
In addition, the manager develops training materials and Standard Operating Procedures (SOPs) and delivers on-the-job training for new and existing floor supervisors and animal care…
Added just now
Superintendent
Wharton-Smith
Sanford, FL
…smaller project budgets. This position works with the Project Manager and other project leadership and maintains regular communication with clients, subcontractors, inspectors, vendors, and…
Added just now
AC
SERVICE CONTRACT EVALUATOR
Air Combat Command
Grand Forks AFB, ND
- $61,722 to $80,243 USD / year
The primary purpose of this position is: To serve as a Service Contracts Manager by performing the full scope of service contract manager functions to include identification, development,…
Added just now
VH
Transportation Asst (Fleet Management)
Veterans Health Administration
Tuscaloosa, AL
- $45,866 to $59,626 USD / year
The Transportation Assistant (Fleet Management) position, with the organizational title as Fleet Manager, is located at the Tuscaloosa Veterans Affairs Medical Center (TVAMC), Engineering…
Added just now
FT
Senior Program Manager
Federal Transit Administration
Kansas City, MO · Fort Worth, TX · New York, NY · Cambridge, MA · Chicago, IL · Washington, DC · Atlanta, GA
- $127,829 to $192,694 USD / year
…Administration (FTA). The incumbent will serve as a Senior Program Manager, under the direction of a division chief, in managing and administering the nationwide program oversight of…
Added just now
Manager, Engineering
Liberty Mutual Insurance
Portsmouth · Columbus · Boston · Plano · Indianapolis
…architecture standards and turn th results into clear next steps for engineering teams. Build partnerships with clients, technology and business managers, vendors and technology executives…
Added just now
B
Senior Project Controls Manager
Boldt
United States
- $124,000 to $165,000 USD / year
As a Senior Project Controls Manager, you’ll partner with project teams and leaders to guide financial and schedule performance while building trust, alignment, and shared accountability.…
Added just now
Senior Associate - Project Manager/Scrum Master
New York Life
New York
The Senior Project Manager / Scrum Master leads program management and agile delivery for the EUC organization. The role owns PI planning, sprint execution, and work allocation across EUC…
Added just now
Manager, Strategic Partnerships
STACK Infrastructure US
Denver, CO
STACK Infrastructure is seeking a commercially minded, highly organized Manager to support the execution of complex customer transactions, strengthen strategic customer and partner…
Added 1 min ago
Senior Mechanical Engineer/Project Manager
Pennoni
Newark, DE
Pennoni is hiring a Senior Project Manager to join our MEP team in Newark, DE.
Added 2 mins ago
Director of Talent Acquisition- Salt Lake City, Utah Preferred
Kipu Systems
United States
Own the candidate experience and the hiring-manager experience end to end: measure both, and act on what you hear.
Added 2 mins ago
Staff E&C Project Manager - Power, Project Execution
Williams WPC-I, LLC.
United States
As a Staff Project Manager, you’re not just managing projects - you’re defining how complex initiatives are executed across the organization. This role demands technical mastery, strategic…
Added 2 mins ago
Senior Cost Manager / Quantity Surveyor - Commercial Construction
Turner & Townsend
Tampa, FL
Turner & Townsend is seeking a Senior Cost Manager / Quantity Surveyor to support construction cost services for commercial real estate projects, including tenant improvements (TI),…
Added 2 mins ago
Senior MEP Project Manager – Construction
Turner & Townsend
Huntsville, AL
Turner & Townsend is looking for a Senior MEP Project Manager to work with our team, and partner with a global manufacturing client.
Added 2 mins ago
Senior Project Manager MEP – Construction
Turner & Townsend
Phoenix, AZ
Turner & Townsend is looking for a Senior MEP Project Manager to work with our team, and partner with a global manufacturing client.
Added 2 mins ago
C
Maintenance Mechanic
CRH
Fontana, CA
- $24.21 to $25.63 USD / hour
…sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting…
Added 2 mins ago
Assistant Project Manager
Southern Industrial Constructors, Inc.
Austin, TX
Southern Industrial Constructors, Inc. is seeking a Assistant Project Manager based in Austin, TX. The Assistant Project Manager is responsible for the planning and execution of every step…
Added 2 mins ago
INT001.Intern Maintenance
Tampa Airport
Tampa, FL
Reporting to the Enterprise Asset Manager, the Asset Management Intern is responsible for supporting HCAA’s development of the asset database for Tampa Airport. The Asset Management Intern…
Added 2 mins ago
Facility Manager, Texas
Apex Clean Energy
Harlingen, TX
Apex is seeking experienced Facility Manager to oversee daily operations of our utility‐scale wind farms near Harlingen, Texas. As the single point of contact for Apex at the site level,…
Added 2 mins ago
Production Leader - Nights
Mars Wrigley Conf. (MCNA)
United States
…strategy for both the individual associates and the team. This manager will implement and enforce established policy and area and organizational…
Added 2 mins ago
Finance Business Partner
Mars Petcare US, Inc.
United States
The Finance Engineering Manager serves as the primary finance business partner to the Engineering organization, providing financial leadership and governance across the capital investment…
Added 2 mins ago
Sr Manager, Category - Cans
Wm. Wrigley Jr.
United States
As a Senior Manager, Category Lead - Cans, you will be globally responsible for the Mars Snacking category strategies for cans. You will partner closely with the Sourcing Managers who will…
Added 2 mins ago
Software Development Manager, Amazon Robotics
Amazon.com Services LLC
Bellevue, WA
…step-by-step guidance for associates and Reliability Maintenance Engineering (RME) technicians, so they can restore a machine in minutes instead of hours. Every failure feeds back into our…
Added 2 mins ago
Sr. Technical Program Manager, Amazon Leo Country Expansion
Amazon Kuiper Commercial Services LLC
Redmond, WA
The Amazon LEO team is looking for a Sr. Technical Program Manager on the Enterprise Enablement Product team. The role will interface with cross-functional product, business, and…
Added 2 mins ago
Production Control TPM, Central Operations Production Control
Amazon Data Services, Inc.
Herndon, VA
A Program Manager in Central Operations your responsibilities will focus on driving efficiencies into our service, support, transportation, execution and engineering business models to…

Cantrell - Gainco

Mechanical Engineer

Gainesville, GA, United States

Apply About employer

Applications open in a new tab.

Job details

Experience: Entry level: new graduate or up to 2 years of experience.
Posting language: English
Posted: Nov 4, 2026

Original job description

Position Summary

The Mechanical Engineer - Sustaining supports Cantrell-Gainco equipment throughout its life through engineer-to-order (ETO) processing, product life-cycle management, and continuous improvement. In this entry-level role, the engineer creates new designs and modifies existing designs, solves problems, and improves products and processes, applying sound engineering practices and principles with safety, quality, and the customer in mind.

Working with guidance from senior engineers and the Engineering Manager, the engineer plans and organizes assigned work, delivers accurate and complete results on time, and partners with manufacturing, quality, supply chain, service, and sales to keep customers’ equipment running well. Success depends as much on how the work is done (thoroughness, responsiveness, tenacity, work ethic, and professionalism) as on technical skill, and scope and independence grow as results are demonstrated.

All job requirements listed are requirements for the core responsibilities of this position. This position may require other activities and duties as assigned by their manager.

Key Responsibilities

Engineer-to-Order (ETO) Processing

Review customer orders and requirements, identify what is standard and what must be engineered, and clarify open questions early.
Configure, design, and modify equipment to order; create and release accurate drawings, bills of materials, and specifications on schedule.
Check every order package for completeness and accuracy before release: right part, right revision, right configuration.
Support manufacturing and assembly as questions arise during the build, and feed lessons learned back into standard designs.

Design & Modification

Create new designs and modify existing designs using 3D CAD, producing clean models and detailed drawings with appropriate GD&T, tolerances, and stack-ups.
Apply design for manufacturability, assembly, and serviceability, and hygienic design principles for washdown and food-processing environments; select materials and components suited to the application.
Favor simple solutions with fewer parts and less complexity, and know when “good enough” meets the requirement.

Product Life-Cycle Management

Prepare and manage engineering changes: define the change, assess impact (fit, form, function, cost, installed base, inventory), obtain approvals, release, and verify implementation.
Maintain configuration, revision control, and documentation accuracy in CAD/PDM and ERP systems, including as-built and as-fielded records.
Resolve component obsolescence and supplier-related technical issues; evaluate and qualify replacement parts and alternate sources.
Keep manuals, parts lists, and technical data current as products change.

Problem Solving & Product Support

Investigate production, field, service, and warranty issues; separate the real problem from the stated problem.
Learn and apply structured root-cause methods (e.g., 5 Whys, fishbone, 8D, TRIZ) to find causes rather than treat symptoms.
Develop corrective and preventive actions, then confirm with data that the fix worked and the issue does not return.
Provide timely technical support to manufacturing, service, sales, and customers, including on-site troubleshooting when needed.

Analysis, Verification & Validation

Perform engineering calculations, tolerance analyses, and basic FEA appropriate to the problem, and sanity-check results against hand calculations and physical reality.
State the requirement up front (for example, the factor of safety required for the load case, material, and duty cycle) and report whether the result meets it, with a clear conclusion and recommendation, not just a number.
Plan and run bench, shop, and field tests; document the method, results, and conclusions.
Separate what is known, what is assumed, and what still needs to be tested, and flag gaps before passing work along.

Continuous Improvement

Identify and implement improvements to product reliability, performance, cost, manufacturability, and serviceability, with priority on recurring failures.
Improve engineering processes (templates, checklists, standard work) and contribute lessons learned to engineering standards and best practices.
Participate in daily and visual management, and track measures such as change lead time, backlog aging, and repeat failures.

Planning, Teamwork & Professional Practice

Plan and prioritize assigned work, commit to realistic dates, deliver on them, keep status visible in the team’s tracking tools, and communicate schedule risk early.
Work effectively individually and in teams; give and accept constructive feedback in design reviews.
Follow safety, quality, and company procedures, and document decisions and rationale as work progresses.

Core Behaviors

How the work gets done matters as much as what is done. These behaviors are as important as technical skill and will be assessed in interviews, performance reviews, and development planning.

Behavior

What it looks like in this role

Planning & Organization

Breaks assignments into steps, sequences them by priority and the critical path, and sets realistic dates. Keeps a traceable thread from problem statement to hypothesis, test, result, and decision. Maintains version control and consistent naming on drawings, models, test data, and files.

Execution: Individually and in Teams

Self-directed: starts work without waiting for permission, owns the outcome end to end (not just a piece of the drawing), and finishes what is started. Shares knowledge, hands work off cleanly, and asks for help early.

Thoroughness & Quality

Checks own work before release: units, load cases, assumptions, revisions, and drawing and BOM accuracy. Asks "what have I missed?" and "what would make this wrong?" before reporting. Sanity-checks results against hand calculations and physical reality, and closes every analysis with a clear conclusion and recommendation.

Responsiveness

Acknowledges requests promptly, sets clear expectations on turnaround, and meets them. Keeps manufacturing, service, sales, and customers informed, and raises risks and delays early. Balances urgent production issues with planned work without dropping commitments.

Tenacity

Stays with hard problems. When an approach fails, returns with a new angle instead of repeating the same test. Works through unglamorous validation, edge-case, and documentation work, and through organizational friction (supplier responses, test time, approvals) to finish the job.

Work Ethic & Accountability

Dependable and self-motivated. Puts in the effort needed to meet commitments, owns mistakes openly, and corrects them without being prompted. Follows through, including on details no one will check.

Professionalism

Communicates clearly and respectfully in writing and in person. Explains technical reasoning simply to non-engineers. Documents decisions and the rationale behind them. Treats design review as a tool, not a threat. Acts with honesty and integrity, and puts safety first.

Problem Solving & Systems Thinking

Distinguishes the real problem from the stated problem. Breaks systems into functions and requirements, and understands how a part interacts with the larger machine (interfaces, tolerances, failure modes). Holds more than one hypothesis at a time and changes one variable at a time.

Pragmatism & Focus

Treats cost, schedule, and manufacturability as design constraints. Knows when "good enough" meets the requirement and favors solutions with fewer parts and less complexity. Says "not now" to tangents so the critical path holds, and protects time for focused work.

Curiosity & Learning

Learns quickly from the products, the shop floor, and the field. Prefers fast, low-cost tests that answer a question before committing to a full solution, and treats being wrong in testing as progress.

Required Qualifications

Bachelor’s degree in Mechanical Engineering, or a closely related engineering field, from an ABET-accredited program.
Entry level: new graduate or up to 2 years of experience. Internships, co-ops, capstone projects, and student design teams count.
Working knowledge of engineering fundamentals: statics, mechanics of materials, materials selection, and engineering drawings including GD&T basics.
Experience with a 3D CAD package (SolidWorks preferred) gained through coursework, internships, or projects.
Demonstrated ability to plan, organize, and deliver work on time, individually and as part of a team (for example, co-op deliverables or a capstone project).
Clear written and verbal communication skills in English; proficient in Microsoft Office (Word, Excel, and PowerPoint).

Preferred Qualifications

Internship or co-op experience in manufacturing, machine design, or product support.
Hands-on mechanical aptitude: machining, welding, sheet metal fabrication, assembly, or equipment repair.
Exposure to PDM, bills of materials, and ERP systems; SolidWorks certification (e.g., CSWA).
Exposure to FEA, tolerance stack-ups, structured problem solving (5 Whys, 8D, DFMEA), or statistical process control.
Familiarity with food, sanitary, or washdown equipment; basic knowledge of pneumatics, electrical, or controls.
Exposure to Lean or continuous improvement methods.

Measures of Success

Order packages (drawings, BOMs, specifications) released complete, accurate, and on time, with little rework.
Engineering changes carried through documented impact assessment, approval, release, and verified implementation.
Issues closed with a verified root cause and corrective action, and fewer repeat failures.
Prompt, clear communication with internal customers; commitments met, or renegotiated early.
Steady growth in technical skill, independence, and scope.

Physical Requirements

The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; and talk and hear. The employee is regularly required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Ability to work for extended periods of time at a workstation on a computer or similar device. Occasional extended periods of standing, bending, kneeling.

Working Conditions

This job operates in both an office setting and a manufacturing warehouse. This role routinely uses standard office equipment, hand tools, and material handling equipment. Travel: up to 10% as needed.

Employment with Cantrell-Gainco is contingent upon successfully completing both a pre-employment background check and a drug screening. All candidates hired must be able to provide proper documentation of their eligibility to work in the US (I-9 form). Cantrell-Gainco is an Equal Opportunity Employer – Minorities / Females / Disabled / Veterans (M/F/D/V)

Equal Opportunity Employer. This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor (https://www.eeoc.gov/poster).

Apply About employer

More about this job

Skills

Product life-cycle
Process improvement
Supply chain management
Sales
Assembly
Design principles
Food engineering
Documentation
ERP
Problem solving
Technical support
Troubleshooting
FEA
Engineering processes
Teamwork
Reporting
Meet commitments
Systems thinking
Mechanical engineering
Material mechanics
Dassault Systemes SolidWorks
Communication skills
Microsoft Office
Microsoft Word
Microsoft Excel
Microsoft PowerPoint
Machining
Welding
Statistical process control
Office equipment
Material handling
Employment law

Report this job