Jobs in the United States

25+ jobs

Save this search

Added 10 mins ago
CW
Packaging Machine Operator - Swing Shift 3pm-11pm
Cerro Wire LLC
Ogden, UT
- From $20.7 USD / hour
Material handling taking product around the plant and property as needed. You may be exposed to the elements as materials are relocated based on production need.
Added 10 mins ago
CW
Packaging Machine Operator - Day Shift 7a-3p
Cerro Wire LLC
Ogden, UT
- From $20.7 USD / hour
Material handling taking product around the plant and property as needed. You may be exposed to the elements as materials are relocated based on production need.
Added 15 mins ago
Shipping and Receiving Associate
DZ Grinders LLC
Caldwell, ID
Successfully completes Rule Steel forklift operator certification training and carries operator card at all times.
Added 15 mins ago
Press Brake Operator
DZ Grinders LLC
Caldwell, ID
The Press Brake Operator safely and accurately follows instructions to operate the Press Brake. The employee will handle materials, count parts, operate computer programs, and ensure safe…
Added 24 mins ago
Quality Technician II - 2nd shift
Boston Scientific
Arden Hills
Use the inventory and traceability management systems to transact and research material.
Added 24 mins ago
Quality Technician II - 1st shift
Boston Scientific
Arden Hills
Use the inventory and traceability management systems to transact and research material.
Added 41 mins ago
Director of Operations
Gozzer Ranch Golf & Lake Club Inc
Coeur d'Alene, ID
Direct, control, and organize the set up, training, service procedures, and TEI interface in line with department goals and budgets for various departments.
Added 51 mins ago
PC
Laser Operator I for 2nd/3rd Shift (M - TH 4 - 10 Hour Shifts)
Precision Castparts Corp. (PCC)
Wilder, KY
- $7.25 USD / hour
Loading and unloading material using a crane.
Added 51 mins ago
DC
Powder Painter - 2nd shift
Donaldson Company
Nicholasville, KY
- $7.25 USD / hour
Operates and conducts equipment changeover of production equipment as defined in operator instructions for that particular piece of equipment and department
Added 52 mins ago
Powder Painter - 2nd shift
Donaldson Company, Inc.
Nicholasville, KY
Operates and conducts equipment changeover of production equipment as defined in operator instructions for that particular piece of equipment and department
Added 1 hour ago
A
Machine Shop Operator
Aerotek
Lafayette, IN
- $24.47 USD / hour
Read and follow blueprints, control plans, and work instructions
Added 1 hour ago
Material Control Operator
thyssenkrupp Materials, LLC
United States
3 years of material control or inventory experience
Added 1 hour ago
Punch Press Operator
ERICO International Corporation
Centralia, IL
…out/tag out, calling up and entering CNC programs, complete operator maintenance functions, operate machine, handle…
Added 1 hour ago
A
Lead Operator
Aerotek
Richmond, IN
- $26 to $28 USD / hour
Lead Operator Film Extrusion$26 - $28/hr | Richmond, IN Responsibilities
Added 1 hour ago
Rigging Trainer
Bechtel Corporation
New Albany, OH
In this role, you will provide project field engineering specialization and expertise with work planning and packaging, material management, quantity verification and validation, safety and…
Added 1 hour ago
M
Forklift Operator
Manpower
Bristol, PA
- $21.5 to $24.25 USD / hour
Position: Forklift Operator / Material Handler
Added 1 hour ago
Material Handler - Fork Lift Operator
Circle Graphics + Sensaria
Grand Prairie, TX
The Material Handler supports the continuous flow of materials throughout Sensaria's warehouse and production operations. Working with limited supervision, completes accurate inventory…
Added 1 hour ago
LM
Machine Operator
Leviton Manufacturing
New Holland, PA
- $24 to $26 USD / hour
Manufacturing Machine Operator – Night Shift (New Holland, PA)
Added 2 hours ago
Manufacturing Execution Specialist
Puffer-Sweiven
Stafford, TX
For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more…
Added 2 hours ago
CP Chemical Operator
Santa Fe Springs, CA
Quality & Process Control: Monitor process parameters, material conditions, and production performance to ensure adherence to specifications and operating requirements.
Added 2 hours ago
A
Forklift Operator And Material Handler Paying $20 Per Hour. Apply Now!! Start ASAP!!!
Aerotek
Florence, NJ
- $19.5 USD / hour
Position: Forklift Operator & Material HandlerShift: Day ShiftIndustry: Warehouse / Distribution Center
Added 2 hours ago
A
Stand Up Forklift Operator - Hiring Immediately
Aerotek
Whitsett, NC
- $17 to $20 USD / hour
HIRING IMMEDIATELY FOR MATERIAL HANDLERS ON WEEKEND SHIFT IN WHITSETT, NC!
Added 2 hours ago
A
Excavator Operator
Aerotek
Mount Holly, NC
- $25 to $28 USD / hour
…supporting high-production earthmoving, excavation, grading, and material handling activities. You will work on complex environmental remediation and heavy civil construction sites, safely…
Added 2 hours ago
A
Machine Operator 19/hr
Aerotek
North Royalton, OH
- $37,440 to $45,760 USD / year
Machine Operator 1st or 3rd Shift - $17-$19/hr
Added 2 hours ago
A
Machine Operator
Aerotek
North Chesterfield, VA
- $23 USD / hour
Job Title: Machine OperatorJob DescriptionThe Machine Operator role focuses on learning and supporting operations within a metals manufacturing environment. You will start as a Utility…

C&W FACILITY SERVICES INC.

Operating Engineer

IN, United States

The compensation for the position is: $34.00 - $40.00

Apply About employer

Applications open in a new tab.

Job details

Pay: The compensation for the position is: $34.00 - $40.00
Posting language: English
Posted: Oct 30, 2026

Original job description

Job Title Operating Engineer

Job Description Summary Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties

Job Description

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES • Perform all plumbing, electrical, or HVAC requirements of the building(s) • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. • Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings • Verify field conditions and perform any necessary repairs or adjustments • Monitor Energy Management • Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property • Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.) • Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. • Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris • Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management • Document and report activities to supervisor • Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns • Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits • Complete all required C&W Safety Training as scheduled annually • Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours KEY COMPETENCIES • Technical Proficiency • Initiative • Flexibility • Multi-Tasking • Sense of Urgency IMPORTANT EDUCATION • High School Diploma of GED Equivalent • Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE • 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting ADDITIONAL ELIGIBILITY QUALIFICATIONS • Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) • May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements • Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable) • Basic Computing Skills in Outlook, Excel & Word • Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. • Knowledgeable in energy management systems, techniques and operations. • Thorough knowledge in all building systems operations, maintenance and repair. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties WORK ENVIRONMENT This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices • Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine • Involves movement between departments, floors, and properties to facilitate work • Ability to speak clearly so others can understand you • Ability to read and understand information presented orally and in writing • Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics OTHER DUTIES This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.

The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.

The company will not pay less than minimum wage for this role.

The compensation for the position is: $34.00 - $40.00

C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at C&W Services, please call the ADA line at 1-888-365-5406 or email Accommodations@cushwake.com. Please refer to the job title and job location when you contact us.

INCO: “C&W Services”

Apply About employer

More about this job

Skills

Plumbing
Painting
Housekeeping
HVAC
Preventive maintenance
Cleaning
Inspection
Inspect engine rooms
Multitasking
Journeyperson
Valid driver's licence
Microsoft Outlook
Microsoft Excel
Microsoft Word
Maintenance and repair
Office equipment

Report this job