Jobs in the United States

25+ jobs

Save this search

Added just now
Software Engineer Senior (AWS Group)
Pathward, N.A.
Remote, United States
Applies knowledge of the technologies in Pathward’s technical stack to develop solutions. Responsible for working as part of a team and is required to perform all duties of software…
Added just now
IG
Principal AI Platform Engineer (AI Platform Operations & Enablement)
Insight Global
Remote, United States
- From $94 USD / hour
The client seeks a highly skilled Platform Engineer to support our growing suite of AI tools, which enable the safe and reliable development and delivery of software via AI agents and…
Added 1 min ago
MG
Android Engineer Intern
Match Group
Los Angeles, CA
- $47 USD / hour
As an Android Engineer Intern, you’ll collaborate with senior engineers to design, build, and ship features that impact millions of users. You’ll work within a highly collaborative,…
Added 1 min ago
Product Development Engineer- Power Conversion EVSE D&R
Ford Global
Dearborn, MI
The Electrified Powertrain Power Conversion EVSE D&R Engineer will own the design, release, packaging, and certification of Electric Vehicle Supply Equipment (EVSE) for future model battery…
Added 2 mins ago
Error: The requested job could not be found.
Sargent & Lundy
State, IL
Added 2 mins ago
Electrical Design Engineer
Caterpillar, Inc.
Mossville, IL
As a Design Engineer with the Large Power Systems Division (LPSD), you will have the opportunity to direct and contribute to the concept, development, and design of complex components,…
Added 2 mins ago
Senior Performance/Simulation/Application Engineer
Caterpillar, Inc.
Mossville, IL
The Aftertreatment & Exhaust Systems (AT&ES) organization is seeking a Senior Performance, Simulation, and Application Engineer to provide technical leadership across simulation, controls…
Added 2 mins ago
Senior Power Electronics Performance & Application Engineer
Caterpillar, Inc.
Mossville, IL
The Senior Performance / Simulation / Application Engineer will provide technical leadership for the analysis, simulation, application, and electrical integration of Medium Voltage Power…
Added 2 mins ago
Senior Embedded Product Analytics Engineer
Caterpillar, Inc.
Mossville, IL
As a Senior Embedded Product Analytics Engineer , you will transform product and engineering data into actionable insights that support New Product Introduction (NPI) , Continuous Product…
Added 2 mins ago
PT
Electrical Engineer
PDS Tech Commercial
Rolling Meadows, IL
- $66.92 USD / hour
As an Electrical Engineer supporting advanced motor control and servo system development , you'll be responsible for designing innovative electromechanical solutions that support critical…
Added 2 mins ago
CT
Electrical Engineer
Continental Tire the Americas, LLC
Mount Vernon, IL
- $96,805 USD / year
Development of all plant projects in which equipment changes are made to achieve production.
Added 2 mins ago
Production Team Lead
ITW
Carol Stream, IL
…Logistics and Customer Experience to maintain material and technical readiness, resolve constraints and improve production…
Added 2 mins ago
Director, Full Stack Engineer
Capital One
Riverwoods, IL
As a Director, Full-stack Engineer at Capital One, you will lead high-performing engineering teams working to define the future of banking in the cloud. You will partner closely with…
Added 2 mins ago
Supply Chain Planning Engineer
Caterpillar, Inc.
East Peoria, IL
As a Supply Chain Planning Engineer on the KK Material Planning team, you perform both operational and tactical work to meet plant material deliverables. You will be responsible for…
Added 2 mins ago
Technical Sales Engineer - South Central US
Vishay Precision Group
Remote, United States
The Technical Sales Engineer will drive design wins, support customer applications, and grow business within a designated territory for our FOIL Division. This customer-facing role combines…
Added 2 mins ago
Technical Sales Engineer - South Central US
Vishay Precision Group
Remote, United States
The Technical Sales Engineer will drive design wins, support customer applications, and grow business within a designated territory for our FOIL Division. This customer-facing role combines…
Added 2 mins ago
Technical Sales Engineer - South Central US
Vishay Precision Group
Remote, United States
The Technical Sales Engineer will drive design wins, support customer applications, and grow business within a designated territory for our FOIL Division. This customer-facing role combines…
Added 3 mins ago
Databricks Forward Deployed Engineering - Senior Data Warehouse Migration Engineer
HTC Global Services Inc
Bloomington, IL
This position combines hands-on migration expertise, technical architecture leadership, and strategic influence. You will establish migration approaches, review and approve technical…
Added 3 mins ago
Transformation Project Engineering Lead - API
AbbVie
North Chicago, IL
…ingenuity to complete complex assignments related to a specific technical field or discipline. A Principal Engineer has full knowledge of other related disciplines beyond their own area of…
Added 3 mins ago
AI Engineer
AbbVie
North Chicago, IL
This entry-level AI Engineer will work under close supervision to apply developing technical knowledge in Software Engineering and Generative AI, performing analytic, testing, modeling, and…
Added 3 mins ago
Manufacturing Controls Engineer
Caterpillar, Inc.
Decatur, IL · East Peoria, IL
As a Manufacturing Controls Engineer based in Decatur, IL , you will provide technical expertise to design and improve manufacturing performance across production, cost, quality, safety…
Added 3 mins ago
Front End Web Applications Developer (Mid-Level) (5664)
SMX
Springfield, IL
SMX is currently looking for a highly motivated Software Engineer - Front End Web Applications to contribute to the design, build, support, and implementation of the Budget and Spend (BAS)…
Added 3 mins ago
Front End Web Applications Developer (Junior) (5660)
SMX
Springfield, IL
SMX is currently looking for a highly motivated Software Engineer - Front End Web Application s to contribute to the design, build, support, and implementation of the Budget and Spend (BAS)…
Added 3 mins ago
Lead Software Engineer
Highmark Health
Springfield, IL
The job is an integral member of an agile software engineer team responsible for building scalable software applications across all digital channels to serve our customers. The position…
Added 3 mins ago
Associate Software Engineer
Highmark Health
Springfield, IL
This job is an integral member of an agile software engineer team responsible for building scalable software applications across all digital channels to serve our customers. Responsible for…

BYU

Structural/Civil Engineer

PROVO, UT, United States

$94,000 to $122,000 USD / year

Apply About employer

Applications open in a new tab.

Job details

Pay: $94,000 to $122,000 USD / year
Posting language: English
Posted: Nov 4, 2026

Original job description

Structural/Civil Engineer The Structural/Civil Engineer provides structural and civil engineering services for BYU Physical Facilities, with approximately 50% focused on structural engineering and 50% on campus civil engineering design and project management. Structural responsibilities will include acting as an owner-side technical resource; reviewing plans, specifications, and calculations prepared by outside structural consultants; performing in-house analysis and design for campus remodeling and renovation projects; and preparing, signing, and sealing engineering documents within the Structural/Civil Engineer's responsible charge and areas of competence. Civil responsibilities include planning and designing campus site and utility improvements; preparing plans, specifications, cost estimates, and bid documents; managing work orders and projects through design, construction, and closeout; reviewing consultant prepared construction documents; and coordinating consultants, contractors, campus stakeholders, and public agencies. This position ensures work complies with applicable codes, BYU standards, project requirements, budgets, and schedules while protecting the health, safety, and welfare of the campus community and visiting public. What you'll do in this position: Structural Engineering Review and Owner Representation - Review consultant-prepared structural drawings, specifications, calculations, and geotechnical recommendations at key design and construction phases. Evaluate code compliance, BYU standards, completeness, coordination, constructability, durability, and cost. - Prepare clear written owner-side comments and recommendations, and coordinate resolution of structural issues with the consultant engineer of record, architects, other engineers, contractors, inspectors, and authorities. The consultant engineer of record retains responsibility for the consultant's design and sealed documents. - Support structural consultant selection and scope development, peer reviews, existing-condition assessments, renovation planning, and evaluation of unforeseen field conditions. In-House Structural Engineering Design - Analyze and design structural systems and components for assigned new construction, renovations, repairs, equipment supports, foundations, retaining structures, and other campus projects. Account for applicable gravity, wind, seismic, snow, soil, and other loads. - Prepare structural calculations, drawings, details, specifications, cost estimates, and supporting documents, coordinating design requirements with architectural, civil, mechanical, electrical, and geotechnical disciplines. - Perform field verification, structural observations, and condition assessments; recommend repairs or strengthening when needed. Sign and seal documents prepared under your responsible charge and within your Utah licensure and competence and refer specialized or higher-risk work to qualified consultants. Civil Engineering Design and Technical Services - Plan and design campus site and utility improvements, including streets, sidewalks, curbs and gutters, parking lots, grading, drainage, storm sewer, sanitary sewer, culinary water, irrigation, and related infrastructure. - Prepare civil plans, specifications, cost estimates, and bid documents. Review consultant-prepared documents for applicable codes, BYU standards, project requirements, constructability, and coordination with existing campus utilities and infrastructure. - Conduct field investigations, condition assessments, engineering analyses, and construction observations; recommend repair, replacement, rehabilitation, or improvement. Help maintain civil standards, details, specifications, and design criteria. Civil Project and Work Order Management - Manage assigned work orders and projects from planning and design through construction and closeout, keepi g scope, schedule, budget, and stakeholder communication on track. - Coordinate with campus clients, Physical Facilities teams, architects, engineers, contractors, consultants, and public agencies. Procure consulting services, define scopes and deliverables, review proposals and invoices, and monitor consultant performance. - Review submittals, requests for information, substitutions, change proposals, and record documents. Assist with construction observations, inspections, punch lists, and acceptance of completed work, and communicate project decisions and issues to stakeholders. What qualifies you for this role: Required - A firm commitment to the mission of BYU - Bachelor's degree in civil engineering or structural engineering from an ABET-accredited program. - Current Utah Professional Structural Engineer license. - At least 8-10 years of progressively responsible professional engineering experience, including substantial commercial or institutional structural design experience and civil/site design or project management experience. - Demonstrated experience preparing structural calculations and construction documents and coordinating structural design with architectural and other engineering disciplines. - Advanced knowledge of structural analysis and design using current adopted building codes and referenced standards, including ASCE 7 and applicable ACI, AISC, TMS, and NDS provisions. - Strong knowledge of civil/site engineering principles, construction practices, codes, permitting, and utility coordination. - Ability to review complex plans and calculations, identify technical and coordination risks, and communicate clear, defensible owner-side recommendations. - Proficiency with AutoCAD and relevant structural analysis and design software; ability to learn and use BYU project, document-control, and work-order systems. - Strong written and verbal communication, organization, judgment, collaboration, and management of multiple concurrent assignments. - Valid driver's license and ability to access active construction sites and existing facilities. Preferred - Master's degree in structural engineering or civil engineering with structural emphasis. - Current Utah Professional Structural Engineer and Professional Engineer licenses. - 10-15 years of combined civil and structural engineering experience, including owner-side plan review, commercial or institutional building design, renovation, assessment, and construction administration. - Experience in a university, institutional, commercial, government, or facilities-management environment. - Proficiency with AutoCAD, AutoCAD Civil 3D and experience with Revit or other building information modeling workflows. - Experience with seismic evaluation and retrofit, reinforced concrete, structural steel, masonry, wood, foundations, retaining structures, and investigation or repair of existing structures. Typical Starting Pay: $94,000.00 to $122,000.00 annually If the job has a post-end date, the last day to apply is the day before. If the job doesn't have a post-end date, the job could close at any time on any day

Apply About employer

More about this job

Skills

Civil engineering
Structural engineering
Project management
TMS
Engineering principles
Autodesk AutoCAD
Valid driver's licence
P.Eng.
Autodesk AutoCAD Civil 3D
Autodesk Revit
Building information modelling

Report this job