Find work in the United States.

A simpler way to find your next job.

Jobs in the United States

25+ jobs

Save this search

Added 4 mins ago
Principal AV Behavior Safety Engineering Lead
General Motors
Frankfort, KY
The AV Safety Strategy and Assurance team is seeking a hands‑on Principal engineer with extensive experience in the end‑to‑end development lifecycle of autonomous vehicle behaviors, from…
Added 4 mins ago
Telecom Engineer IV
Ryder System
Frankfort, KY
The Telecom Engineer IV will provide Tier 3 and 4 support, engineering / design, testing and deployment in all areas of responsibility of the Enterprise Voice Team; Voice Facilities, UCaaS…
Added 4 mins ago
Security Engineer
Meta
Frankfort, KY
B.S. or M.S. in Computer Science or related field, or equivalent experience
Added 4 mins ago
IT Systems Engineer III
University of Louisville
Louisville, KY
Bachelor's degree in Computer Science or a related field and four (4) years of relevant experience or an equivalent combination of education and experience. Grade 8 (Salaried)
Added 4 mins ago
EG
Senior Data Engineer
Eliassen Group
Frankfort, KY
- $101,000 to $161,800 USD / year
Our client seeks a Senior Data Engineer to own the governed transformation layer end-to-end. The role will design and build Snowflake transformation layers, migrate legacy SQL views and…
Added 22 mins ago
Process/Productivity Engineer 4
Lam Research
Tualatin, OR · Tualatin
Process/Productivity engineer who will provide technical support to field process engineers, and product support personnel who are troubleshooting thin film deposition chambers for gaps in…
Added 22 mins ago
Field Process Engineer 4
Lam Research
Austin, TX · Austin
At Lam, as a Field Process Engineer you are a customer-focused expert on our equipment, pushing the boundaries to meet customer needs. You’re responsible for completing process support,…
Added 29 mins ago
Principal/Sr Principal Software Engineer
Northrop Grumman
Huntsville, AL · Huntsville
Principal level: 5 Years of relevant experience with a Bachelor's degree in STEM field; 3 Years relevant experience with Masters degree; 1 Years of relevant experience with PhD
Added 29 mins ago
Principal / Sr. Principal Cyber Systems Administrator
Northrop Grumman
Huntsville, AL · Huntsville
Engineer and maintain monitoring and observability solutions (e.g., Prometheus, Grafana, log aggregation, tracing) to provide real-time insight into system and network health.
Added 29 mins ago
Principal/Sr. Principal RF Microwave Design Engineer (Level 3 or 4)
Northrop Grumman
Goleta, CA · Goleta
Northrop Grumman’s Space Sector is seeking a Principal/Sr. Principal RF Microwave Design Engineer (Level 3 or 4) to join our MEP organization in Goleta, CA.
Added 41 mins ago
Instrument & Controls Engineer
AstraZeneca Pharmaceuticals LP Company
Frederick, MD
The Instrument Engineer is responsible for the lifecycle management, reliability, specification, troubleshooting, configuration, and technical ownership of process control instrumentation…
Added 58 mins ago
C-17 Mechanical Systems Design Engineer - ECS (Mid-Level or Senior)
The Boeing Company
Long Beach, CA
Boeing Global Services (BGS) has an exciting opportunity for a Mid or Senior Level Mechanical System Design & Analysis Engineer – Environmental Control Systems (ECS) to be a part of the…
Added 1 hour ago
R
Staff Developer Relations Engineer
Render
Remote, United States
- $204,000 to $250,000 USD / year
Our interview process is unique to each role, and we value the candidate experience just as much as our customer experience. We hope your conversations with us reflect a thoughtful process…
Added 1 hour ago
PC
Civil Engineer 3 - Surface Water Management
Pierce County
Pierce County, WA
- $56.62 to $72.07 USD / hour
A bachelor’s degree from an ABET accredited program in civil engineering, or a closely related field, may be substituted for experience on a year for year basis, up to four years.
Added 1 hour ago
Site Reliability Engineer 2 - Production Engineering
Anduril Industries
Seattle, WA
We are seeking a Site Reliability Engineer 2 who is passionate about building resilient, highly available systems that scale to meet the demands of the core systems powering Lattice. You…
Added 1 hour ago
Site Reliability Engineer 2 - Production Engineering
Anduril Industries
Costa Mesa, CA · Seattle, WA
We are seeking a Site Reliability Engineer 2 who is passionate about building resilient, highly available systems that scale to meet the demands of the core systems powering Lattice. You…
Added 1 hour ago
EG
Senior Data Engineer
Eliassen Group
Bismarck, ND
- $101,000 to $161,800 USD / year
Our client seeks a Senior Data Engineer to own the governed transformation layer end-to-end. The role will design and build Snowflake transformation layers, migrate legacy SQL views and…
Added 1 hour ago
Process Engineer/Senior Process Engineer
Kymanox
Morrisville, NC
The Process Engineer / Senior Process Engineer will join our Technical Services team as a full-time Drug Product/Fill Finish Subject Matter Expert (SME), serving as a Functional Lead and…
Added 1 hour ago
Field Leader Measurement & Regulation (M&R)
Northern IN Public Serv Co LLC
United States
A Field Leader for Measurement & Regulation provides leadership to a team of employees and/or contractors directly responsible for operating and maintaining measurement and/or regulation…
Added 1 hour ago
Water & Wastewater Project Engineer
Consor Engineers
San Diego, CA
As a Water/Wastewater Project Engineer, you'll play a key role in the planning, design, and delivery of essential water infrastructure projects throughout California. Working alongside…
Added 1 hour ago
O
Lead Principal Core Infrastructure Engineer
Oracle
Nashville, TN
- $146,300 to $306,400 USD / year
As a Lead Principal Core Infrastructure Engineer on Oracle's Strategic Customer Engineering team, you will play a critical role in driving complex technical initiatives across Oracle Cloud…
Added 1 hour ago
JH
2027 Internship - Robotics Engineer – Maritime Systems
Johns Hopkins Applied Physics Laboratory
Laurel, MD
- $22.6 to $47.95 USD / hour
Are you excited about developing solutions to challenging problems in the field of robotics?
Added 1 hour ago
Test & Validation Integration Engineer
Quantum Sky
Chantilly, VA
Quantum Sky is searching for a Test & Validation Integration Engineer to support an Intel customer in Chantilly, VA The Test & Validation Integration Engineer serves as the critical bridge…
Added 2 hours ago
Principal Tech Ops Engineer, AWS Rack Manufacturing
Amazon Data Services, Inc.
Salt Lake City, UT
We are seeking a Principal Tech Operations Engineer to lead and scale regional manufacturing operations across a complex, multi vendor hardware production ecosystem. This role owns the end…
Added 2 hours ago
Research Scientist/Engineer 4
University of Washington
Seattle, WA
The Department of Biochemistry has an outstanding opportunity for a Research Scientist/Engineer 4 to join their team.

Blue Current

Senior Associate Engineer, Process Quality

Hayward, CA, United States

$95,400 - $127,000 USD

Apply About employer

Applications open in a new tab.

Job details

Pay: $95,400 - $127,000 USD
Posting language: English
Posted: Oct 27, 2026

Original job description

About Blue Current

Blue Current (the “Company”) is the industry leader in the development of silicon solid state batteries. Free of flammable liquid electrolytes, Blue Current’s fully dry, inherently safe batteries significantly reduce risks to human and environmental health while providing a higher-performance alternative to traditional lithium-ion batteries. Blue Current’s silicon-based platform is highly adaptable, enabling a cost-effective solution for both the mobility and stationary storage markets. Blue Current’s team works out of its state-of-the-art headquarters and pilot line facility in Hayward, California. To learn more about Blue Current, Inc., visit http://bluecurrent.com.

Position Summary

The Senior Associate Engineer, Process Quality carries out the day-to-day quality work that keeps Blue Current's measurements trustworthy and its processes in control. Working under the direction of senior engineers and the Process Quality manager, this role performs quality testing and inspection, keeps quality records and control charts current, and gathers the evidence that investigations depend on. It is a hands-on role at the bench and on the manufacturing floor, learning the methods and systems that govern quality at Blue Current while taking on steadily more of their execution. Success means quality data that is complete, accurate, and available for the team to make decisions, while continuously improving the company’s understanding of process and product performance.

Essential Functions & Responsibilities

Performs routine quality control testing and inspection on incoming materials, in-process components, and finished cells according to established test methods and acceptance criteria
Collects, enters, and verifies quality data in established systems, checking records for completeness and flagging values that fall outside expected ranges
Maintains process control charts for assigned operations, identifies out-of-control signals, and escalates them to the responsible process owner and the Process Quality manager
Shares feedback between engineering and quality by observing process execution, identifying gaps between documented and actual practices, and highlighting opportunities to improve safety, reproducibility, or quality.
Executes measurement system analysis studies, including Gauge R&R, following established protocols, and documents the results
Drafts and revises standard operating procedures (SOP) and work instructions for quality control methods under the direction of senior engineers, and routes them through document control
Conducts first-pass investigation of nonconforming material and process deviations, documenting observations and evidence, and contributes findings to root cause analyses led by senior engineers
Performs incoming inspection on supplier materials against specification, documents non-conformances, and tracks open supplier quality issues to closure
Compiles quality metrics and prepares recurring reports for process owners and the Process Quality team
Follows and helps improve laboratory and manufacturing safety practices, including correct use of personal protective equipment and proper handling of materials
Other duties as assigned, consistent with the scope and level of this position.

Minimum Qualifications

Education

BS in relevant field, or AS with 2+ years of relevant experience, or 4+ years of relevant experience; relevant fields include Materials Science, Chemical Engineering, Chemistry, Physics, or a related field, with a focus on batteries or electrochemical devices

Experience

Hands-on experience in a laboratory or manufacturing setting, which may include internship, co-op, or academic research, involving measurement, testing, and documentation of results
Experience following written procedures and recording data accurately where the record matters to someone downstream

Skills & Knowledge

Ability to connect observations from the manufacturing floor to potential quality or process risks and identify opportunities for continuous improvement.
Working knowledge of basic statistics as applied to process data, including central tendency, variation, and control limits.
Ability to use a spreadsheet or statistical software (e.g., Excel, JMP, Minitab, or R) to summarize, chart, and interpret measurement data
Clear written communication sufficient to document observations, record results, and draft procedure text that another person can follow
Attention to detail and a demonstrated commitment to data integrity and record traceability
Demonstrates technical curiosity by questioning unexpected results and using observations and data to determine if further investigation is needed.
Ability to take direction, ask clarifying questions, and escalate problems rather than work around them.

Certifications / Licenses

Preferred Qualifications

Coursework or practical exposure to Lean Six Sigma, statistical process control, or design of experiments
Experience in a battery, semiconductor, medical device, aerospace, or automotive manufacturing environment
Familiarity with measurement systems analysis concepts such as gauge repeatability and reproducibility
Exposure to quality management system elements such as document control, change management, or nonconformance handling
Experience working in a dry room, glovebox, or other controlled-environment laboratory
Lean Six Sigma Yellow Belt or Green Belt

Core Values - Minimum Qualifications

Safety & Security First

For employees, customers, and intellectual property

Demonstrated commitment to maintaining a safe and secure work environment, including adherence to workplace safety protocols, data privacy standards, and confidentiality requirements.
Proven ability to identify and appropriately escalate potential risks to personnel, customers, or sensitive information.

Trust & Respect

Treat everyone with honesty, dignity, and sensitivity. Embrace different perspectives. Be humble.

Demonstrated ability to communicate and collaborate effectively with individuals of diverse backgrounds, perspectives, and working styles.
Track record of maintaining professionalism, integrity, and discretion in all workplace interactions.

Ownership & Accountability

Take responsibility and action. Set goals and deliver. Don't wait for others.

Demonstrated ability to independently prioritize, execute, and follow through on responsibilities with minimal supervision.
Proven track record of setting measurable goals, meeting deadlines, and taking initiative to resolve challenges proactively.

Technical Excellence

Always strive for the best solution possible.

Demonstrated commitment to quality and continuous improvement in delivering work product, solutions, and outcomes within area of expertise.
Ability to evaluate options critically and apply sound judgment to identify the most effective and scalable solution.

Learn & Be Curious

Think outside the box. Always learning.

Demonstrated ability to quickly acquire new skills, tools, or domain knowledge in response to evolving business needs.
Proven track record of applying creative or unconventional thinking to solve problems.

Be Resourceful

Be hungry, frugal, and flexible. Use what you have. Find a way.

Demonstrated ability to deliver results in resource-constrained environments by maximizing existing tools, processes, and partnerships.
Proven ability to adapt and find effective solutions in ambiguous or rapidly changing situations.

Delight Customers

Build stronger relationships with internal and external customers.

Demonstrated commitment to understanding and exceeding the needs of internal and/or external customers.
Track record of building and maintaining strong, trust-based relationships that drive positive outcomes for all stakeholders.

Physical Requirements & Working Conditions

Occasional lifting and positioning of equipment and components up to approximately 30-50 lbs (e.g., test fixtures, chamber components, cabling); installation and maintenance work may involve bending, reaching, and working around electromechanical equipment.
Work in proximity to electrical test equipment, batteries, and temperature-control systems; adherence to all applicable electrical, battery, and laboratory safety protocols is required.
Prolonged periods of screen-based work for test configuration, monitoring, data review, and documentation.
Regular use of personal protective equipment (PPE) including safety glasses, gloves, and lab coat; additional PPE may be required depending on materials handled
Able to pass a respirator fit test and wear a respirator periodically.
Travel is estimated at less than 10% of working time and would be primarily domestic (e.g., vendor or equipment site visits)
FAT program execution or in the event of vendor or supplier visits.
Work in gloveboxes or a dry room may be required at times, up to a full work day
Standard weekday business hours; occasional off-hours availability may be required to support long-running test campaigns, installations, or troubleshooting.

Salary Range

$95,400 - $127,000 USD

Equal Opportunity Employment Statement

Blue Current is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, age, or any other characteristic protected by applicable federal, state, or local law.

At-Will Employment & Disclaimer

Employment at Blue Current is at-will. This means that either the employee or Blue Current may terminate the employment relationship at any time, for any reason or no reason, with or without cause, and with or without advance notice, subject to applicable law. This job description does not create an express or implied contract of employment, nor does it alter the at-will nature of the employment relationship. The duties, responsibilities, and qualifications described herein are subject to change at the Company's discretion and do not represent all tasks that may be required of this role.

Applicants must be authorized to work in the U.S. without the need for sponsorship now or in the future.

Apply About employer

More about this job

Skills

Inspection
Quality control
Control engineering
Personal protective equipment
Materials science
Chemical engineering
Research
Documentation
Process improvement
Statistics
Manage quantitative data
Microsoft Excel
Minitab
R
Communication skills
Attention to detail
Lean manufacturing
Statistical process control
Quality assurance procedures
Change management
Lean Six Sigma Green Belt
Control systems
Visit suppliers
Troubleshooting

Report this job