Jobs in the United States

25+ jobs

Save this search

Added 4 mins ago
UO
Engineering and Architecture Program Manager (Senior Project Manager)
University of Colorado Denver
Aurora, CO
- $41,600 USD / year
Throughout the course of a project, the Senior Project Manager will work with internal University clients, departments, stakeholders, Facilities Building Maintenance and Operations, and…
Added 4 mins ago
MS
Field Engineer - Emergency Call Handling
Motorola Solutions, Inc.
Denver, CO
- $75,000 to $85,000 USD / year
The Emergency Call Handling (ECH) Field Engineer will report to the ECH Field Engineer Manager. The Field Engineer is ultimately accountable for the system being implemented based on the…
Added 5 mins ago
UO
Laboratory Operations Manager
University of Colorado Denver
Boulder, CO
- $85,000 to $115,000 USD / year
…center within the Ann and H.J. Smead Department of Aerospace Engineering Sciences at the University of Colorado Boulder, has an immediate opening for a Laboratory Operations Manager to…
Added 5 mins ago
UO
Capital and Controlled Maintenance Program Manager
University of Colorado Denver
Boulder, CO
- $113,000 to $124,000 USD / year
The PD&C department consists of three teams (Planning, Engineering, and Design & Construction) responsible for the planning, design, and construction of buildings on campus, in support of…
Added 5 mins ago
UO
Design and Construction Project Manager
University of Colorado Denver
Boulder, CO
- $82,000 to $87,500 USD / year
The PD&C department consists of three teams (Planning, Engineering, and Design & Construction) responsible for the planning, design, and construction of buildings on campus, in support of…
Added 5 mins ago
BH
Utility Construction Supervisor
Black Hills Energy
Pueblo, CO
- $31,533 USD / year
…Construction Support personnel, including but not limited to design, estimation, and locating personnel in the variety of systems and processes required to perform their assigned tasks.*…
Added 5 mins ago
UO
Design and Construction Estimator
University of Colorado Denver
Boulder, CO
- $114,000 to $129,000 USD / year
The PD&C department consists of three teams (Planning, Engineering, and Design & Construction) responsible for the planning, design, and construction of buildings on campus, in support of…
Added 5 mins ago
UO
Program Manager - Q-SCALE (Quantum Skills, Credentials, and Learning Expansion)
University of Colorado Denver
Boulder, CO
- $34,986 USD / year
…Boulder is seeking a highly organized and collaborative Program Manager to support the implementation of Q-SCALE (Quantum Skills, Credentials, and Learning Expansion), a multi-year quantum…
Added 22 mins ago
Project Management Manager 2 - 31058
Huntington Ingalls Industries
Pocasset, MA
…applications. Serving customers in more than 30 countries, HII provides design, autonomy, manufacturing, testing, operations and sustainment of unmanned systems, including unmanned…
Added 22 mins ago
Systems Engineering Manager (ONSITE)
Collins Aerospace
Marlborough, MA
The Strategic Communications Team is currently seeking a motivated Systems Engineering Manager who is ready to lead a talented and enthusiastic team of engineering professionals. The…
Added 40 mins ago
Construction Surveillance Engineer
BB&E
Jacksonville, FL
BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial…
Added 40 mins ago
Construction Engineering Technician
BB&E
North Chicago, IL
BB&E is seeking a dynamic and detail-oriented Construction Engineering Technician to support BB&E's A&AS contract, assisting NAVFAC Mid-Atlantic, supporting facilities design and…
Added 40 mins ago
Supervisor Construction Surveillance Engineer
BB&E
North Charleston, SC
BB&E is a full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the…
Added 40 mins ago
Program Manager - Environmental Restoration/Remediation
BB&E
Atlanta, GA
BB&E is seeking a collaborative, proactive, and technically capable Program Manager – Environmental Restoration/Remediation to lead and grow Federal environmental restoration and…
Added 40 mins ago
B
Federal Design & Construction Project Manager
BB&E
Norfolk, VA
- $130,000 to $160,000 USD / year
BB&E is seeking a dynamic, detail-oriented, and technically accomplished Federal Design and Construction Project Manager to join our team supporting facilities design and construction…
Added 40 mins ago
Construction Surveillance Engineer
BB&E
Jacksonville, FL
BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial…
Added 40 mins ago
Construction Manager
BB&E
Kerrville, TX
BB&E is an employee-owned full service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors…
Added 1 hour ago
Tool & Die Group Leader
Toyota Boshoku America Inc
Jackson, TN
Cooperates and participates with manufacturing managers and engineering in the design and redesign of tools, dies, molds and related attachments.
Added 1 hour ago
Software Engineering Manager, Robotics
Ford Motor Company
Redford, MI
Ford's Advanced Technology & Platforms organization is seeking an Engineering Manager to lead and grow a global robotics software engineering team. The team develops the application…
Added 1 hour ago
Mechanical Integration Lead, OMHS
Amazon
Caledonia, MI
…fulfillment center sites. This role provides hands-on mechanical engineering leadership in complex automation environments, ensuring projects meet Amazon's safety, timeline, cost, and…
Added 1 hour ago
Quality Manager
Leggett & Platt, Incorporated
Grand Rapids, MI
Leggett & Platt’s inventive heritage and leadership span more than 130 years. Leggett & Platt has divisions that design, manufacture, and sell a variety of products for all areas of life.…
Added 1 hour ago
Software Development Manager
Midcontinent Communications
Sioux Falls, SD
Added 1 hour ago
EC
Quality Manager
Eaton Corporation
Westminster, SC
- $113,000 to $165,000 USD / year
Quality discipline knowledge including: sampling techniques, cost of quality, experimental design, SPC, audit systems, corrective actions and engineering activities.
Added 1 hour ago
Quality System Specialist II
BD (Becton, Dickinson and Company)
Sumter, SC
…feat. It takes the imagination and passion of all of us - from design and engineering to the manufacturing and marketing of our billions of MedTech products per year - to look at the…
Added 1 hour ago
EC
NPI Engineering Manager
Eaton Corporation
Sumter, SC
- $113,000 to $165,000 USD / year
Eaton’s ES AMER ARS division is currently seeking a NPI Engineering Manager. Relocation assistance will be provided for candidates residing outside a 50-mile radius of Sumter, SC!

BB&E

Construction Engineering Technician

North Chicago, IL, United States

Competitive compensation packages ($90,000-$110,000) This range represents good-faith compensation for the position at the time of posting.

Apply About employer

Applications open in a new tab.

Job details

Pay: Competitive compensation packages ($90,000-$110,000) This range represents good-faith compensation for the position at the time of posting.
Education: High school diploma
Posting language: English
Posted: Sep 18, 2026

Original job description

BB&E is an employee-owned, full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering, and Program/Project Management Services to the Federal and private sectors. Position Summary BB&E is seeking a dynamic and detail-oriented Construction Engineering Technician to support BB&E's A&AS contract, assisting NAVFAC Mid-Atlantic, supporting facilities design and construction projects on-site at Naval Station Great Lakes, Great Lakes, IL. Job Duties & Responsibilities Quality Assurance (QA)

Provide overall coordination of the construction quality management program for assigned projects
In conjunction with the Construction Manager (CM), review and provide recommendations toward approval of the contractor quality control plan
Attend selective quality control, preparatory, and initial meetings, and monitor three-phase checklists for accuracy and thoroughness
Provide relevant remarks on Government QA reports (or in the identified section of Contractor's Quality Control (QC) reports), particularly on critical, definable features of work included
Take/file/distribute progress photos
Validate quantity, condition, and approval of materials on site before the Government issuing invoice payments
Coordinate support to review and witness successful testing and commissioning/certification of critical systems (i.e., mechanical - HVAC/TABS/DALTS/DDC, electrical -pad mounted transformers/high-voltage systems/switchgear/automatic transfer switches/frequency converters, fire and life safety/fire protection systems, roofing systems, and underwater structures)
Assure quality workmanship by specifications and industry standards on concrete/masonry/stucco/building, envelope/structural steel/bolting/welding, and other building materials/structural systems, as required
Attend/witness selected tests and review all applicable test reports and results
Keep the Government sponsor advised as to the status of projects under their administrative and technical control, but the responsibility to plan and carry out the assignment is accomplished independently

Safety Management

In conjunction with the CM, perform cursory review of Activity Hazard Analyses (AHAs) and ensure via the Site Safety and Health Officer (SSHO) that these are discussed by the construction contractor and their respective subcontractors before beginning each work activity or when a new work crew is to perform the work in accordance with the three phases of QC
In conjunction with the CM, review and provide recommendations towards acceptance of Crane Critical Lift Plans, along with crane operation qualifications, and certificate of compliance
Must be familiar with crane safety requirements and NAVFAC P-307 (Management of Weight Handling equipment); observe critical lifts
Ensure construction contractors conduct monthly site safety self-evaluations and submit the information with the pay vouchers/invoices; perform worksite safety assessments, as needed
Take appropriate, timely action to ensure construction contractor compliance with safety and health requirements, including leading safety stand-downs, as required, and recommending dismissal of key construction contractor staff from the project due to non-performance or recurring violations
Ensure reporting of contractor significant incidents/near misses with a focus that corrective actions have been taken
Perform cursory review/QA of Contractor’s Significant Incident Reports (CSIRs) and OSHA Form 300 (Contractor’s Log of Work-Related Injuries and Illnesses)
Provide additional support (as needed) in mishap investigations where property damage is >$500,000, injury and/or occupation injury results in fatality or permanent partial/total disability, or three or more personnel are hospitalized for inpatient care because of a single mishap

Technical Support

Support extensive contact with key construction contractor representatives to promote an atmosphere of partnering and cooperation, and to resolve problems and maintain the construction schedule quickly
Coordinate temporary utility and communication hook-ups for contractors, and coordinate utility outages and road closures
Coordinate lay-down area and storage areas, as required
Coordinate excavation, hot work, burn, and other construction-related permits, as needed, subject to local restrictions
Provide support as a point of contact for the Supported Command interface/coordination in the field
Support collateral equipment installation and phone/data/communication connections
Assist with the investigation of potential latent defects
Assist with the coordination of the installation of cylinders/cores, keying system, and turnover of keys to the owner/occupant and coordination of the facility system training for the owner/occupants/PW shops personnel
Review pre-final contract drawings and specifications (particularly Division 01 administrative requirements) and technical RFPs, respectively
Perform on-site visits to review constructability and compatibility with actual field conditions
During design development and constructability reviews, provide technical knowledge of local conditions, including availability of construction materials and skilled labor; for problems found, make solution recommendations for designer consideration
Actively participate in partnering sessions, depending on the nature and scope of the construction contract
Facilitate effective relationships and processes between contractors, Support Command, and government team members
Support the review of all Government-approved technical and administrative submittals, including, but not limited to, the schedule of prices, contractor's baseline critical path schedule, accident prevention plan, activity hazard analyses, safety and health plan, QC plan, test plans/reports, performance verification tests of major systems, etc.
Investigate engineering problems that may arise on construction contracts, such as unforeseen conditions, contractor requests for information (RFIs), and dimension conflicts; make recommendations for solutions to the NAVFAC CM
Support preliminary scheduling meeting and review 3-week look ahead schedules (as applicable); review updates of the baseline schedule with the CM to determine if contractor is ahead, on or behind; review the critical activities to ensure the work on the construction contract remains focused on completion in the most reasonable time; as necessary (particularly when a contractor is falling behind schedule), participate in the bi-weekly look ahead meetings with the construction contractor to review project scheduling problems or concerns
Review and annotate, as required, the contractor's daily reports
Assure environmental compliance by the contractor and coordinate EPA jobsite visits, when required
Review and verify the accuracy of as-built drawings in support of invoice payments
When applicable, coordinate with NAVFAC CM and issue a non-compliance notice to the contractor
Arrange and coordinate pre-final and final acceptance inspections and track completion of punch list items
Support the closeout process, including delivery of as-built drawings, warranties, operations & maintenance (O&M) manuals, and spare parts turnover

Key Qualifications

US Citizenship and theability to obtain/maintain a NACI/CAC are required
Certification: Must successfully complete the US Army Corps of Engineers (USACE) Construction CQM Certification within 60 days of start date
Must be familiar with crane safety requirements and NAVFAC P-307 (Management of Weight Handling equipment)

Experience & Education

Experience: A minimum of 5 years of verified experience as a Quality Control Manager working for General Contractors on NAVFAC or US Army Corps of Engineers (ACOE) projects OR 10 years of verified foreman experience in one or more of the following trades: Concrete, Mechanical, Electrical, Masonry, or Carpentry on commercial/industrial/military projects; residential expertise does not qualify
Education: Aminimum of a High School diploma is required

Physical Requirements and Work Environment The physical demands and work environment may vary based on the position, assigned duties, and work location. Employees must be able to perform the essential functions of the position, with or without reasonable accommodation.

Remain in a stationary position for extended periods
Use computers, telephones, and other office equipment
Move throughout offices, facilities, and project sites
Reach, grasp, handle equipment, and operate controls
Communicate effectively and review documents, equipment, and site conditions
Lift and carry materials or equipment weighing up to 50 pounds when required by the assignment
Stand or walk for extended periods and occasionally climb, kneel, or crouch
Navigate uneven or rough terrain when required
Work indoors and outdoors in varying weather conditions
Occasionally enter confined spaces or work at heights when required
Wear required personal protective equipment
Work in environments that may include noise, dust, fumes, chemicals, electrical hazards, construction activity, or other site specific conditions

Limitations and Disclaimer This job description describes the general nature and level of work associated with the position. It is not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions. Employees may be assigned other job related duties consistent with applicable law. The duties and requirements described above are representative of those that may be necessary to perform the essential functions of the position, with or without reasonable accommodation.

Compensation, Benefits & Perks

Competitive compensation packages ($90,000-$110,000) This range represents good-faith compensation for the position at the time of posting. Individual compensation is determined based on several factors, including job responsibilities, relevant experience, education, certifications, technical skills, security clearance status, geographic location, market conditions, internal equity, and contract-specific requirements.
Participation in the Employee Stock Ownership Plan – BB&E is 100% employee-owned!
Discretionary bonus
*Medical, Dental, and Vision Insurance with health care concierge
*Employer provided Short-Term & Long-Term disability
*Employer-provided Life insurance
*Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits
*Generous PTO plus 11 paid holidays
Traditional & Roth 401(k) options with fully vested employer match
Tuition reimbursement & professional development
Employee referral program
Employee discounts
Employee Assistance Program (EAP)
Home ownership benefits
Pet insurance discount

*Applies only to full-time employees *BB&E is an Equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

Apply About employer

Report this job