Electrical engineer jobs in Prairieville, LA and nearby (37 jobs)

Electrical engineer jobs within 25 miles of Prairieville, LA. Nearby towns and cities are included. Distances are straight-line, not driving distances.

Counted Nov 9, 2026

Hiring at a glance

View jobs

Open jobs: 37
Employers: 21

Advertised starting pay

Not enough comparable pay figures yet.

Employer-advertised starting pay, not employee salaries. Currencies and pay periods stay separate.

Where work happens

Remote: 0%0 listings
Hybrid: 5%2 listings
On-site: 16%6 listings

Not specified: 78% (29 listings)

Employers hiring include Worley (9), Enercon Services Inc. (5), Northstar Energy Services (3).

Sources & calculation notes

These figures describe the listings on this role page at the date shown, not the whole job market. Listings can change.

Employer-listed minimums from at least 10 listings per currency and pay period. These are advertised starting amounts, not employee salaries. Jobs without a minimum and unusual amounts are excluded.

Hybrid and on-site classifications may be inferred from descriptions. Check the original ad. How we count

Electrical engineer jobs in Prairieville, LA and nearby

Within 25 miles

Save this search

Added 3 days ago
Undergraduate Rotational Electrical Engineer
Worley
Baton Rouge, LA
Added 3 days ago
Undergraduate Rotational Electrical Engineer
Worley
Baton Rouge, LA
Added 3 days ago
Graduate Electrical Engineer
Worley
Baton Rouge, LA
Added 4 days ago
Electrical Engineer V
Hargrove and Associates, Inc
Baton Rouge, LA
Job Scope: Generally responsible for performing all aspects for complete design of complex electrical and instrumentation engineering assignments. This level requires extensive progressive…
Added 4 days ago
Electrical Engineer
Atalco Gramercy Operations
Gramercy, LA
We are seeking a highly motivated Electrical Engineer to join our team at an alumina refinery. This role is critical in driving equipment reliability, managing change processes, and…
Added 5 days ago
Lead Instrumentation Engineer
LED FastStart
Baton Rouge, LA
Position DescriptionThis Lead Instrumentation Engineer position is for a direct-hire working for HGA in the Baton Rouge, LAoffice. You will work with other project leads, managing…
Added 9 days ago
A
Electrical Engineer
Actalent
Baton Rouge, LA
- $45 to $75 USD / hour
Job Title: Electrical Systems EngineerJob DescriptionWe are seeking an Electrical Systems Engineer responsible for managing multi-part systems, including board-level interfaces, harness…
Added 13 days ago
Field Electrical Engineer
Southern Power Systems
Baton Rouge, LA
Added 13 days ago
Electrical Design Engineer
Enercon Services, Inc.
Baton Rouge, LA
Become a part of ENERCON as a Mid-Level Electrical Design Engineer. We are seeking talented Electrical Engineers to join our Nuclear Design Group.
Added 13 days ago
Electrical Design Engineer - Senior & Principal
Enercon Services, Inc.
Baton Rouge, LA
Become a part of ENERCON as a Senior or Principal Electrical Design Engineer. We are seeking talented Electrical Engineers to join our Nuclear Design Group.
Added 18 days ago
Principal Instrumentation Engineer
Worley
Baton Rouge, LA
Added 18 days ago
Principal Instrumentation Engineer
Worley
Baton Rouge, LA
Added 23 days ago
Electrical Engineer I
Hargrove Engineers & Constructors
Baton Rouge, LA
Added 24 days ago
Senior Electrical Engineer
Worley
Baton Rouge, LA
Added 24 days ago
Senior Principal Electrical Engineer
Búsqueda de puestos
Baton Rouge, LA
Added 25 days ago
Senior Electrical Engineer
Worley
Baton Rouge, LA
Added 25 days ago
Senior Principal Electrical Engineer
Worley
Baton Rouge, LA
The Sr. Principal Electrical Engineer serves as a senior technical leader responsible for researching, developing, designi
Added 26 days ago
Electrical Engineer
ALACUS Air Liquide Large Industries U.S. LP
Baton Rouge, LA
Added 27 days ago
Staff Electrical Engineer - Nuclear Design Group
Enercon Services, Inc.
Baton Rouge, LA
Added 27 days ago
New Graduate- Associate Electrical Engineer - Nuclear Design Team
Enercon Services, Inc.
Baton Rouge, LA
Added 27 days ago
ES
Intern - Electrical Engineer - Nuclear Design Team
Enercon Services, Inc.
Baton Rouge, LA
- $24 to $28 USD / hour
Added 27 days ago
Lead Electrical Engineer IV
CDI Engineering Services
Baton Rouge, LA
Added 27 days ago
Instrumentation Engineer V
CDI Engineering Services
Baton Rouge, LA
Added 27 days ago
Electrical Engineer
Trilon Group
Baton Rouge, LA
Waggoner Engineering, Inc. is seeking an experienced Electrical Engineer to join our team in Baton Rouge, Louisiana. This position will support the planning, design, and delivery of…
Added 28 days ago
Control Systems - Engineer Lead
John H. Carter Company
Baton Rouge, LA

Bascom Hunter Technologies

CONTROL SYSTEMS ENGINEER

Baton Rouge, LA, United States

Apply About employer

Applications open in a new tab.

Job details

Experience: This role is intended for new graduates and engineers with approximately 0–3 years of experience.
Posting language: English
Posted: Oct 8, 2026

Original job description

Bascom Hunter is seeking an Associate Control Systems Engineer to support the modeling, development, integration, and verification of control systems for aerospace and defense applications. This role is intended for new graduates and engineers with approximately 0–3 years of experience. Working under senior engineering guidance, you will develop dynamic system models, implement and tune control algorithms, support Model-in-the-Loop (MIL) and Hardware-in-the-Loop (HIL) testing, and participate in system integration and verification. Assignments will increase in scope and independence as technical capability develops. Control architecture, safety-critical decisions, and final verification approaches remain subject to senior technical review.

Responsibilities

Control Systems Development

Develop dynamic models using MATLAB, Simulink, Simscape, and Stateflow for thermal, fluid, mechanical, electrical, and electromechanical systems.
Translate system requirements into measurable control and software requirements.
Develop and tune control algorithms including feedback control, sequencing, state logic, limiters, protection functions, fault handling, and actuator commands.
Support control strategies for motors, compressors, fans, pumps, valves, heaters, sensors, and related equipment.
Analyze system dynamics, stability, transient response, operating limits, and control authority.
Develop block diagrams, state diagrams, interface definitions, and control-system documentation.

Modeling, Simulation, and Verification

Develop and execute MIL simulations across nominal, transient, boundary, and fault conditions.
Support SIL and HIL testing and real-time simulation as programs mature.
Develop test scenarios, automated scripts, and data-analysis tools.
Analyze simulation and test results to identify instability, performance limitations, model discrepancies, or unexpected behavior.
Correlate analytical models with laboratory and system-test data.
Support requirements-based verification and document test results, anomalies, and acceptance evidence.

Integration and Testing

Work with systems, software, electrical, mechanical, FPGA, and test engineers to integrate controls with production-representative hardware.
Support bench, subsystem, and system-level testing of sensors, actuators, controllers, motor drives, and related equipment.
Assist in troubleshooting controls, communications, timing, sensor, actuator, and integration issues.
Participate in prototype builds, laboratory testing, system-performance testing, and qualification activities.
Support resolution of differences between model predictions and physical system behavior.

Engineering Process and Documentation

Maintain models, requirements, interfaces, test artifacts, and technical documentation under configuration control.
Support requirements traceability from system requirements through implementation and verification.
Participate in design reviews, peer reviews, Test Readiness Reviews, and engineering change activities.
Support implementation of model-based designs into embedded software and review generated or manually developed C/C++ code where applicable.
Learn and apply applicable aerospace development processes and standards, including DO-178C, DO-331, and MIL-STD-882, as required by the program.

Required Qualifications

Bachelor’s degree in Mechanical, Electrical, Aerospace, Controls, Mechatronics Engineering, or a closely related discipline.
Approximately 0–3 years of relevant experience; prior full-time engineering experience is not required.
Foundational understanding of dynamic systems, feedback control, and classical control concepts.
Academic, project, internship, or professional experience with MATLAB and Simulink.
Ability to interpret technical requirements, engineering data, plots, schematics, and control diagrams.
Strong problem-solving, technical communication, and documentation skills.
Ability to work effectively within a multidisciplinary engineering team.
U.S. citizenship required with ability to obtain a U.S. Government security clearance.

Preferred Qualifications Experience or exposure in one or more of the following areas is beneficial:

Simscape, Stateflow, or other physics-based modeling tools.
PID, feedforward, gain-scheduled, state-space, or supervisory control development.
MIL, SIL, or HIL simulation and testing.
Real-time platforms such as Speedgoat, dSPACE, or National Instruments.
Embedded controls, real-time systems, microcontrollers, or C/C++.
Sensors, actuators, motor drives, compressors, pumps, valves, fans, or other electromechanical systems.
MATLAB or Python-based data analysis and test automation.
Aerospace or defense development standards including DO-178C, DO-331, MIL-STD-882, DO-160, or MIL-STD-461.

Additional Information All positions at Bascom Hunter are subject to background investigations. Employment is contingent upon successful completion of applicable background screening, including criminal-history and identity verification. Bascom Hunter is an Equal Opportunity Employer and complies with all applicable federal, state, and local employment laws.

Apply About employer

More about this job

Skills

Control systems
ICT system integration
The MathWorks MATLAB
The MathWorks Stateflow
Documentation
SIL
Data analysis
Hardware testing methods
Troubleshooting
Perform laboratory tests
C
C++
Mechatronics
Problem solving
Communication skills
dSPACE
Python
Test automation

Report this job