Jobs in the United States

25+ jobs

Save this search

Added 5 mins ago
TA
Sr. Space Based Environmental Monitoring (SBEM) Strategic Architect
The Aerospace Corpor
Colorado Springs, CO
- $151,300 to $226,900 USD / year
The Defense Systems Group (DSG) provides analysis-based decision support to senior leaders on space architectures, policy and strategy, technology development, warfighter capability…
Added 5 mins ago
TA
Flight Dynamics Engineer
The Aerospace Corpor
Colorado Springs, CO
- $132,900 to $249,600 USD / year
…innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of…
Added 5 mins ago
TA
2027 Trajectory Optimization Engineer
The Aerospace Corpor
Colorado Springs, CO
- $86,600 to $150,400 USD / year
…innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of…
Added 5 mins ago
TA
MEO Missile Warning & Tracking (MWT) SEIT Engineer
The Aerospace Corpor
Colorado Springs, CO
- $117,300 to $175,900 USD / year
The Defense Systems Group (DSG) provides analysis-based decision support to senior leaders on space architectures, policy and strategy, technology development, warfighter capability…
Added 5 mins ago
TA
MEO Missile Warning & Tracking (MWT) Lead SEIT Engineer
The Aerospace Corpor
Colorado Springs, CO
- $151,300 to $226,900 USD / year
The Defense Systems Group (DSG) provides analysis-based decision support to senior leaders on space architectures, policy and strategy, technology development, warfighter capability…
Added 23 mins ago
SCADA Commissioning Engineer
GE Vernova
Boston, MA
GE Vernova is seeking a skilled SCADA System Engineer to lead and execute pre-commissioning, commissioning, integration, testing, and maintenance activities for Supervisory Control and Data…
Added 23 mins ago
Manufacturing Engineer 2 - Unmanned Underwater Vehicles (UUV) 31057
HII
Pocasset, MA
The Manufacturing Engineer II supports the development, documentation, and execution of manufacturing processes for Unmanned Underwater Vehicles (UUVs) in a defense contracting environment.…
Added 29 mins ago
Modeling & Simulation Systems Engineer (3/4) (Principal or Sr. Principal)
CORP-Corporate Office
United States
Northrop Grumman Aeronautics Systems has an opening for a Modeling & Simulation Systems Engineer to join our team of qualified, diverse individuals within our Research and Advanced…
Added 55 mins ago
Sr. Compliance Engineer - Supervisory
METROPOLITAN UTIL DIST
Omaha, NE
…Position Summary Under limited supervision, the Sr. Compliance Engineer - Supervisory is responsible for managing various aspects of District regulatory compliance efforts, interactions and…
Added 1 hour ago
Staff High Voltage System Architect and Simulation Engineer
Ford Motor Company
Allen Park, MI
The Staff. HV System Design and Simulation Engineer will contribute to the advanced development of the High Voltage (HV) system architecture in Ford’s Universal EV (UEV) platform. In this…
Added 1 hour ago
Product Development Engineer- Power Conversion EVSE D&R
Ford Motor Company
Dearborn, MI
The Electrified Powertrain Power Conversion EVSE D&R Engineer will own the design, release, packaging, and certification of Electric Vehicle Supply Equipment (EVSE) for future model battery…
Added 1 hour ago
PT Forward Model Quality Engineer
Ford Motor Company
Dearborn, MI
…Ford's Powertrain Engineering organization as a hands-on quality engineer. You will work closely with Product Development, Manufacturing and Service teams to help make sure our V6 and V8…
Added 1 hour ago
Product Development Engineer - Systems Engineering
Ford Motor Company
Dearborn, MI
This position is for an Internal Combustion Engine Propulsion and Thermal Systems Engineering (IPTSE) Engine Systems Engineer on an Engine Powerpack Team. The successful candidate will be…
Added 1 hour ago
Product Development Engineer – Wiper/Washer (Subject Matter Expert)
Ford Motor Company
Dearborn, MI
A role for Wiper and Washer Systems within Global Body Exterior Ornamentation team responsible for technical content, strategy & processes. In this role, you will serve as the Subject…
Added 1 hour ago
DevOps and Automation Engineer – ICPE
NVIDIA Corporation
North District, IL
We are looking for a creative, independent, and hands-on DevOps and Automation Engineer to join the IC Test and Product Engineering group in NVIDIA Networking Business Unit. NVIDIA…
Added 1 hour ago
EC
Quality Manager
Eaton Corporation
Westminster, SC
- $113,000 to $165,000 USD / year
…requirements, which provide concise assessment points, systematic control methods and utilize available systems for prioritizing…
Added 1 hour ago
CIVIL ENGINEER
Air Combat Command
Shaw AFB, SC
Added 2 hours ago
Senior Fuel Equipment and Auxiliary Engineer
Babcock Power Services
Marlborough, MA
…power Generation industry. The Sr. Fuel Equipment / Auxiliary Engineer is responsible for design of combustion system equipment including burners, valves, heaters, filters, hoses, and their…
Added 2 hours ago
Sr. Electrical Engineer
Babcock Power Services
Marlborough, MA
8+ years’ applicable experience in control systems and electrical systems design and start up, and application in an industrial plant environment,
Added 2 hours ago
Enterprise Security Systems, Senior Engineer II
Sempra
San Diego, CA
Leads complex technical work within a specialty and solves ambiguous problems that span multiple systems. Designs integrated solutions and provides authoritative direction on major change…
Added 2 hours ago
GA
Sr Staff Applications Operations Engineer - Engineering Tools Automation & AI Ops
GE Aerospace
Saint Louis, MO
- $131,000 to $174,000 USD / year
+ Minimum 5 years of professional experience in Application Operations or systems administration supporting enterprise or engineering applications
Added 2 hours ago
GA
Sr Staff Applications Operations Engineer - Engineering Tools Automation & AI Ops
GE Aerospace
Kansas City, MO
- $131,000 to $174,000 USD / year
+ Minimum 5 years of professional experience in Application Operations or systems administration supporting enterprise or engineering applications
Added 2 hours ago
Principal Automation Engineer Optical Inspection SME
J&J Family of Companies
Wilson, NC
Senior Automation Engineer will lead internal team members, suppliers, OEMs, system integrators, Digital/IT partners, automation-system owners, and cross-functional stakeholders to deliver…
Added 2 hours ago
M
Critical Environment Electrical Engineering
Microsoft
ON, CA
- $85,800 to $169,300 CAD / year
Understanding of electrical theory and practical application via your maintenance & operation of critical electrical equipment. (Paralleling switchgear, redundant UPS systems, DC battery…
Added 2 hours ago
AI/ML Engineer
Avalore, LLC
Arlington, VA
The AI/ML Engineer will design, build, and maintain AI/ML lifecycle core services and products. This person will create utilities and ensure seamless function of orchestration capabilities…

ASML US, LP. (US30)

Senior Electrical Engineer- PCBA Designer

San Diego, CA, United States

$143,063-209,825 Pay scales are determined by role, level, location and alignment with market data.

Apply About employer

Applications open in a new tab.

Job details

Pay: $143,063-209,825 Pay scales are determined by role, level, location and alignment with market data.
Posting language: English
Posted: Nov 2, 2026

Original job description

Introduction to the job Help develop the highly reliable electronic systems and connectivity solutions that enable ASML’s EUV source and lithography technology.

As a PCBA Designer at ASML, you’ll lead the design, development, integration, and validation of complex electronic connectivity solutions. You’ll help shape electrical architectures involving PCBAs, cabling, interconnects, racks, and subsystem integration while ensuring designs meet demanding EMC, signal integrity, safety, and reliability requirements. Working in multidisciplinary teams, you’ll guide designs from concept through qualification and production while helping define the technologies and engineering practices that support future ASML systems.

Role and responsibilities You’ll serve as a senior technical leader for electronics connectivity and EMC, working across engineering disciplines and with suppliers to develop robust hardware solutions for complex semiconductor manufacturing equipment.

As Senior Electrical Engineer - PCBA Design Engineer, you’ll:

Lead development of electrical connectivity architectures, including PCBAs, cables, harnesses, racks, cabinets, and subsystem interconnects.
Define and maintain electronic hardware requirements, specifications, interface definitions, and validation plans.
Design, review, and qualify PCBAs used in control, monitoring, and communication applications.
Perform electrical architecture trade studies to optimize performance, reliability, manufacturability, serviceability, and cost.
Drive EMC/EMI compliance throughout the product development lifecycle, including design reviews, mitigation strategies, and qualification testing.
Define design rules and layout constraints for signal integrity, grounding, shielding, high-speed interfaces, and EMC performance.
Support schematic capture, component selection, design verification, and root-cause analysis.
Lead troubleshooting and failure-analysis activities at the board, module, and system levels.
Collaborate with system architects, software engineers, mechanical engineers, manufacturing engineers, suppliers, and development partners to deliver robust electronic solutions.
Review supplier designs and provide technical guidance on electrical design, EMC performance, and qualification readiness.
Contribute to technology roadmaps involving connectivity, electronics reliability, and high-speed communication interfaces.
Provide technical guidance in technologies including cPCI, PCIe, PLC, EtherCAT, Ethernet, photodetectors, differential signaling, wideband circuits, high-speed embedded computing, VHDL, distributed signal acquisition, and signal integrity.
Support project planning activities and communicate technical risks, project status, and mitigation plans to stakeholders and management.
Mentor and coach junior engineers and project teams.
Transfer technical knowledge to Manufacturing, Service, and Support organizations.
Perform other duties as assigned.

Education and experience To help us solve some of the most complex electronics challenges in the semiconductor industry, you’ll need significant experience developing high-reliability electronic hardware and integrating electronics into complex systems.

As Senior Electrical Engineer - PCBA Design Engineer, you’ll need:

Bachelor’s degree in Electrical Engineering; an advanced degree is preferred.
At least 10 years of industry experience in electronic hardware development.
At least 5 years of experience designing PCBAs and electronic modules for semiconductor, industrial, aerospace, medical, automotive, or similarly demanding applications.
Strong knowledge of analog and digital circuit-design fundamentals.
Knowledge of FPGA design technologies.
Demonstrated experience developing electrical connectivity solutions, including cabling, harnesses, racks, enclosures, and interconnect systems.
Strong experience with PCBA design, schematic capture, component selection, design review, design validation, and hardware release.
Hands-on experience with EMC/EMI design techniques, qualification testing, and emissions and immunity testing.
Experience defining grounding, shielding, filtering, and signal integrity strategies for complex electronic systems.
Experience troubleshooting analog and digital electronics at the board, module, and system levels.
Experience using laboratory equipment such as oscilloscopes, logic analyzers, spectrum analyzers, network analyzers, and communication bus analyzers.
Experience with schematic capture and hardware design tools. Experience with Capital, XPedition, Altium Designer, or similar platforms is preferred.
Familiarity with high-speed and digital communication interfaces such as Ethernet, SPI, I2C, UART, RS-232, RS-422, RS-485, and PCIe.
Understanding of reliability engineering concepts such as MTBF, HALT, ALT, and DFMEA.
Experience with configuration management and engineering change processes.
Experience collaborating with suppliers and outsourced development partners.

Experience with the following is a plus:

EMC certification and compliance testing to IEC, EN, CISPR, FCC, CE, or equivalent standards.
High-speed digital PCB design and signal integrity analysis.
Functional safety principles and electronics safety requirements.
Hardware qualification in regulated or high-reliability product environments.
Semiconductor capital equipment, industrial automation, motion control, or precision mechatronic systems.
Leading technical investigations involving EMC-related field issues.
SAFe Agile methodologies.

Skills Working at the cutting edge of technology means solving problems that cross traditional engineering boundaries. You’ll collaborate with multidisciplinary teams and global partners, balancing electrical performance, reliability, manufacturability, serviceability, safety, and cost.

To thrive in this job, you’ll need the following skills:

Strong technical leadership and systems-thinking capability.
Deep understanding of electronic connectivity, EMC, grounding, shielding, signal integrity, and electrical integration principles.
Strong knowledge of analog and digital electronics.
Hands-on hardware design experience spanning requirements definition, detailed design and review, component selection and evaluation, procurement, validation, and release.
Excellent troubleshooting, problem-solving, and root-cause analysis skills.
Ability to identify technical risks and drive timely resolution.
Ability to communicate complex technical concepts effectively to technical and non-technical audiences.
Strong written communication skills, including the development of technical specifications, design documentation, validation plans, and engineering reports.
Ability to mentor, influence, and provide technical direction to engineering teams.
Ability to establish effective working relationships with global stakeholders, suppliers, and development partners.
Strong ownership, accountability, and decisiveness.
Strong customer focus and commitment to product quality.
High attention to detail and commitment to engineering excellence.
Ability to work independently with limited supervision while providing technical leadership across multiple projects.
Ability to work effectively as part of a multidisciplinary team in a fast-paced, dynamic environment.

Other Information

This position is located on-site in San Diego, CA . It requires onsite presence to attend in-person work-related events, trainings and meetings and to further ensure teamwork, collaboration and innovation.
A flexible workplace arrangement may be available to employees working in roles conducive to remote work (up to two days a week).
Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
Occasionally lift and/or move up to 20 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves for entire duration of shift.
While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.

The current base annual salary range for this role is currently:

$143,063-209,825 Pay scales are determined by role, level, location and alignment with market data. Individual pay is determined through interviews and an assessment of several factors that that are unique to each candidate, including but not limited to job-related skills, relevant education and experience, certifications, abilities of the candidate and pay relative to other team members. The Company offers employees and their families, medical, dental, vision, and basic life insurance. Employees are able to participate in the Company’s 401k plan. Employees will also receive eight (8) hours of vacation leave every month and (13) paid holidays throughout the calendar year. For more information, please contact the Recruiter or click on this link Compensation & Benefits in the US.

All new ASML jobs have a minimum application deadline of 10 days.

This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology.

Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company.

Need to know more about applying for a job at ASML? Read our frequently asked questions.

Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company’s reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML’s process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

Apply About employer

Report this job