Jobs in the United States

25+ jobs

Save this search

Added 1 min ago
T
Product Engineer
TSMC
Camas, WA
- $92,220 to $135,480 USD / year
Previous hands-on experience in IC design and test development, or experience with process integration.
Added 3 mins ago
Quality Engineer Level II
Blue Origin Personnel, LLC
Huntsville, AL
This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply…
Added 3 mins ago
Aerospace Systems Engineer II - Blue Ring Space Vehicle Requirements & Verification Architect
Blue Origin Personnel, LLC
Denver, CO · Huntsville, AL · Reston, VA
5+ or more years of space system development or test engineering experience
Added 3 mins ago
GN&C Engineer III - Blue Ring
Blue Origin Personnel, LLC
Denver, CO
As a Guidance, Navigation and Control (GN&C) Engineer, you will directly contribute to the design, development, implementation and testing of the Blue Ring GN&C subsystem. In a fast-paced…
Added 3 mins ago
Lunar Operations Mechanical Engineer – Analysis
Blue Origin Personnel, LLC
Space Coast, FL
This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply…
Added 3 mins ago
FPGA Electrical Engineer III
Honeybee Robotics, LLC
Los Angeles, CA
Honeybee Robotics' Exploration Systems division is seeking an Electrical Engineer specializing in Field Programmable Gate Arrays (FPGAs). In this role you will be interfacing with…
Added 3 mins ago
Senior GNC Hardware Engineer - Blue Ring
Blue Origin Personnel, LLC
United States
As a Senior GNC Hardware Engineer you will directly contribute to the planning, selection, development, sourcing and acceptance of GN&C hardware for Blue Ring. In a fast-paced dynamic…
Added 3 mins ago
Electrical Engineer Level III, Launch Infrastructure Developmen
Blue Origin Personnel, LLC
Space Coast, FL
As part of a hardworking team of specialists, technicians, and engineers perform as an AC power systems engineer for ground systems. You will design, develop, and test AC power systems for…
Added 6 mins ago
Electrical Design Engineer
Simplexity Product Development
Seattle, WA
Simplexity Product Development is seeking a Generalist Electrical Design Engineer with new product development experience to sit on site with other Simplexity team members, alongside client…
Added 6 mins ago
Senior Mechanical Design Engineer
Simplexity Product Development
North Reading, MA
As a Senior Mechanical Design Engineer, you will work with teams designing subsystems for a range of products, tools, and equipment, including robotics, mechanisms, and biotech…
Added 8 mins ago
Digital Failure Analysis Engineer (Dallas/Richardson)
Texas Instruments
Richardson, TX
…Convert failing silicon into actionable root cause by integrating test and characterization data, DFT-enabled observability, volume scan diagnosis, and targeted physical analysis (such as…
Added 9 mins ago
IA
Quality Assurance Engineer II
Inductive Automation LLC
Folsom, CA
- $115,000 to $125,000 USD / year
The Quality Assurance Engineer II develops and executes tests for all aspects of Ignition. Under the guidance of a Quality Assurance Group Manager, they are responsible for developing,…
Added 9 mins ago
Senior Research Engineer
Zap Energy
Everett, WA
Zap Energy is currently seeking a Senior Research Engineer to help develop the next generation of Z-pinch fusion devices. The Senior Research Engineer will be involved at all stages of…
Added 12 mins ago
Senior AI Engineer, Finance AI & Automation
BMO Bank N.A.
Chicago, IL
BMO is hiring a Senior AI Engineer to design, build and run production-grade AI solutions across Finance. You will own solutions end to end:
Added 12 mins ago
Sr. Software Dev Engineer
Amazon Kuiper Manufacturing Enterprises LLC
Redmond, WA
This Software Development Engineer will have the opportunity to be a member of the Hardware Validation Team working within the wider Electrical Engineering Team. This highly collaborative…
Added 15 mins ago
Test Engineer II
Sierra Nevada Company, LLC
Southern Pines, NC
…us in championing and protecting explorers and heroes! As a Test Engineer II, you will play a crucial role in developing and executing complex test plans and procedures for various…
Added 15 mins ago
Test Engineer II
Sierra Nevada Company, LLC
Southern Pines, NC
…us in championing and protecting explorers and heroes! As a Test Engineer II, you will play a crucial role in developing and executing complex test plans and procedures for various…
Added 15 mins ago
Systems Engineer I/II - Network
Novo Nordisk
Clayton, NC
Plan, prepare, test & execute backup & recovery procedures for supported servers
Added 15 mins ago
Sr Automation Engineer
Corning Incorporated
Hickory, NC
Actively participate / direct all phases of the project including initiation, design/development, equipment build, factory acceptance, production start-up support, training of plant…
Added 15 mins ago
Test and Qualification Engineer
Corning Incorporated
Hickory, NC
Corning is seeking a Test and Qualification Engineer to design, build, and automate optical test systems that support the performance and qualification of fiber optic products. In this…
Added 15 mins ago
Sr Project Manager - AI Data Centers
Jacobs
Cary, NC
Lead schedule development in P6, MS Project, or comparable tools; coordinate critical-path milestones across BOD, 30%/60%/IFC design, permits, procurement, construction, commissioning, and…
Added 15 mins ago
Network Security Engineer Master
GovCIO
Raleigh, NC
GovCIO is seeking a highly experienced Master Network & Security Engineer to lead the design, operation, troubleshooting, and continuous improvement of enterprise network-security…
Added 15 mins ago
C
Senior Java Full Stack Engineer – Spring Boot & AWS
Cognizant
Raleigh, NC
- $86,000 to $99,000 USD / year
As a Senior Java Full Stack Engineer – Spring Boot & AWS , you will make an impact by designing and delivering scalable, secure, cloud-based applications using Java, Spring Boot, React, and…
Added 15 mins ago
MLOps Automation Engineer Lead
Huntington National Bank
Charlotte, NC
Experience in configuration management, test-driven development, and release management
Added 17 mins ago
Entry-Level Application Engineer – Semiconductor Test
Advantest
San Jose, CA
We are seeking a motivated Entry-Level Application Engineer to join our System Applications Engineering team. This role is ideal for a recent graduate or early-career engineer interested in…

Ametek, Inc.

Supplier Quality Engineer

Binghamton, NY, United States

Apply About employer

Applications open in a new tab.

Job details

Education: Bachelor’s degree
Posting language: English
Posted: Nov 3, 2026

Original job description

The Supplier Quality Engineer (SQE) ensures that external suppliers consistently provide materials, components, processes, and services that meet AMETEK, customer, contractual, and regulatory requirements. The role provides technical supplier-quality leadership for radio-frequency (RF) amplifiers, printed circuit board assemblies (PCBAs) used in aircraft electronic “black box” equipment, PCBA manufacturing processes, electric motors, and starter-generators. The SQE protects product conformity and delivery performance through supplier qualification, process and product audits, risk-based surveillance, data analysis, corrective action, and cross-functional collaboration across PDS locations. This position can be based in either Binghtamon, NY or Wichita, KS.

Essential Duties & Responsibilites:

Lead supplier quality activities from source selection and qualification through ongoing performance monitoring, development, and, when necessary, disqualification.
Plan and conduct supplier QMS, process, and product audits against ISO 9001, AS9100, AMETEK requirements, purchase-order flowdowns, drawings, specifications, and approved manufacturing processes.
Assess supplier capability for RF amplifier assemblies and aircraft electronics, including RF-sensitive workmanship, shielding/grounding, connector and cable integrity, component control, configuration control, test discipline, traceability, and environmental or acceptance-test compliance.
Evaluate PCBA manufacturing controls for SMT and through-hole assembly, soldering, rework/repair, cleanliness, ESD controls, moisture-sensitive devices, special process controls, inspection, functional test, and design-for-manufacturability risk.
Evaluate manufacturing controls for AC/DC motors, generators, and starter-generators, including winding, insulation systems, soldering/brazing, varnish or impregnation, balancing, machining, assembly, electrical test, mechanical test, and final acceptance.
Review supplier processes, control plans, PFMEAs, inspection plans, manufacturing instructions, test procedures, calibration controls, capability studies, and objective evidence to verify effective process control.
Monitor supplier performance using defects, escapes, receiving rejects, complaints, corrective-action status, delivery impact, and trend data; develop and maintain supplier scorecards and risk-based priorities.
Initiate and manage supplier containment and Supplier Corrective Action Requests (SCARs). Validate root cause, correction, corrective action, implementation evidence, and sustained effectiveness using structured methods such as 5-Why, fishbone, 8D, DMAIC, and FMEA.
Lead supplier-related root cause and corrective action for production disruptions, customer escapes, field returns, and repeat nonconformances; coordinate recovery plans with Operations, Materials, Engineering, Receiving Inspection, and Quality.
Support new product introduction and supplier transitions by reviewing producibility, quality planning, inspection and test readiness, first article requirements, documentation, and capacity or process risks before production approval.
Review First Article Inspection packages in accordance with AS9102 and applicable customer requirements; support APQP/PPAP activities when contractually or internally required.
Ensure applicable quality and regulatory requirements are accurately flowed to suppliers and lower-tier sources, including control of changes, nonconforming product, counterfeit-part prevention, records, special processes, and customer-specific requirements.
Support the Approved Supplier List (ASL), supplier risk assessments, source inspections, deviation or concession reviews, MRB activities, and escalation of risks affecting conformity, compliance, or delivery.
Provide technical guidance and training to suppliers and internal teams on quality requirements, audit findings, defect prevention, and continuous improvement.
Support internal audits and third-party, customer, or regulatory audits as assigned. Maintain clear, complete, and audit-ready records of supplier evaluations, audits, corrective actions, approvals, and performance decisions
Support multiple PDS locations and product lines; travel to supplier sites as required. Perform other duties as assigned
Initiate supplier containment, increased inspection, controlled shipping, or other risk-control actions when product conformity may be affected
Issue SCARs, identify required objective evidence, and reject inadequate or ineffective responses
Recommend supplier approval, conditional approval, probation, development plans, suspension, or disqualification based on documented performance and risk
Escalate supplier quality or compliance risks that may affect safety, airworthiness, regulatory compliance, customer requirements, production, or delivery.
Up to 50% travel required

Position Requirements:

Education:

Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, Quality Engineering, or a related technical discipline required.
Equivalent relevant education and extensive supplier/manufacturing quality experience may be considered in accordance with company policy.

Experience:

Five to seven years of progressive quality, supplier quality, manufacturing engineering, or process engineering experience in a regulated manufacturing environment.
Demonstrated experience auditing to ISO 9001 and/or AS9100 and evaluating compliance through objective evidence.
Hands-on experience with at least two of the following product/process areas: RF amplifiers or RF electronics; aerospace PCBAs/electronic black boxes; SMT/PTH PCBA manufacturing; electric motors; generators or starter-generators.
Aerospace industry and multi-site supplier quality experience strongly preferred.
Demonstrated ability and willingness to use AI tools to improve productivity, decision-marking, work quality, and to reduce costs. The successful candidate must be able to identify appropriate AI use cases and critically evaluate AI-generated outputs

Technical Knowledge & Skills:

Working knowledge of ISO 9001 and AS9100 requirements, process-based auditing, risk-based thinking, corrective action, internal auditing, and supplier auditing.
Ability to read and interpret engineering drawings, schematics, bills of material, specifications, acceptance criteria, purchase-order flowdowns, inspection/test records, and manufacturing documentation.
Knowledge of PCBA manufacturing processes, including SMT, PTH, soldering, rework, ESD, cleanliness, component traceability, automated/manual inspection, and functional test. Familiarity with applicable IPC workmanship standards is preferred.
Knowledge of RF amplifier or RF electronics manufacturing and test concepts, including grounding, shielding, interconnect integrity, configuration control, and verification against defined acceptance criteria.
Knowledge of electro-mechanical manufacturing processes applicable to motors, generators, and starter-generators, including winding, insulation, impregnation, balancing, machining, assembly, and performance testing.
Proficiency in supplier audits, FMEA, control plans, SPC, process capability, MSA, 8D, 5-Why, fishbone analysis, Lean Manufacturing, and data-driven problem solving.
Familiarity with AS9102 First Article Inspection, APQP/PPAP principles, FAA requirements, and customer-specific aerospace quality flowdowns preferred.
Strong analytical, written, verbal, presentation, negotiation, and relationship-management skills; able to communicate clear expectations while maintaining productive supplier partnerships.
Proficiency with Microsoft Word, Excel, PowerPoint, and quality data or ERP systems. Ability to organize multiple priorities, maintain accurate records, and meet critical deadlines.
Must be self-directed, detail-oriented, able to work well under pressure, and effective as a member of cross-functional and geographically dispersed teams.

Certifications:

Certified Quality Auditor (CQA), Certified Quality Engineer (CQE), AS9100 Aerospace Auditor, or equivalent auditor training is preferred.
Lead auditor training to ISO 9001 and/or AS9100 is strongly preferred.

Apply About employer

More about this job

Skills

ISO 9001
Manufacturing processes
Regulatory compliance
Assembly
Inspection
Machining
Test procedures
Control engineering
Documentation
Process improvement
Internal auditing
Electrical engineering
Mechanical engineering
Process engineering
Auditing
Electric motors
Read engineering drawings
SPC
Lean manufacturing
Problem solving
Negotiation
Microsoft Word
Microsoft Excel
Microsoft PowerPoint
ERP

Report this job