Rf Engineer
- Brooksville, FL, United States
Pay and BenefitsThe pay range for this position is $50.00 - $80.00/hr.
Applications open in a new tab.
Job details
- Pay
- Pay and BenefitsThe pay range for this position is $50.00 - $80.00/hr.
- Posting language
- English
- Posted
Original job description
Job Title: Staff RF Electrical Engineer (Aerospace)Job DescriptionThis role offers an experienced RF electrical engineer the opportunity to own complex aircraft electrical and RF integration projects from concept through production, installation, testing, and sustainment. You will design and integrate electrical and RF systems into aerospace platforms while meeting customer, regulatory, and airworthiness requirements. The position combines detailed aircraft electrical design, RF and radar system integration, hands-on testing and troubleshooting, and cross-functional liaison support across engineering, manufacturing, quality, and customers. You will serve as a technical leader and subject-matter expert, guiding teams and driving projects to successful certification and deployment.Responsibilities
- Lead the design and integration of aerospace electrical and RF systems from conceptual design through final design, production, installation, and testing.
- Own detailed aircraft electrical design activities, including wire routing and shielding, harness diagrams, block diagrams, schematics, aircraft interfaces, and component selection.
- Develop and maintain electrical documentation such as wiring schematics, wiring interconnects, harness drawings, and aircraft interface drawings using CAD tools.
- Perform Electrical Load Analysis, failure-mode analysis, and other electrical-system analyses to support airworthiness, reliability, and certification requirements.
- Integrate avionics, sensors, RF and radar systems, electrical and electromechanical equipment, and other complex aircraft subsystems into new and existing platforms.
- Generate and execute bench and aircraft test plans, including qualification tests, flight-test support, and customer-site installation testing.
- Use test equipment such as meters, oscilloscopes, data acquisition systems, signal generators, and other RF and electrical test instruments to validate system performance.
- Troubleshoot electrical and RF anomalies, interpret and correlate test data with engineering requirements, and implement corrective actions.
- Prepare airworthiness and certification documentation, including test plans, technical reports, and analyses that support regulatory and customer approvals.
- Provide hands-on liaison support to engineers, inspectors, mechanics, technicians, and Material Review Board processes to resolve design, production, and installation issues.
- Support on-aircraft installation, integration, and verification of wiring, harnesses, RF systems, and associated equipment at company and customer sites.
- Contribute to proposals, pricing estimates, and project planning for new and existing aerospace and defense programs.
- Lead and mentor engineering team members, providing technical direction and acting as a technical authority for aircraft electrical and RF integration.
- Collaborate with cross-functional teams, customers, and regulatory stakeholders to ensure designs meet system interface standards and aircraft certification requirements.
- Support quality inspection and manufacturing processes to ensure electrical and RF designs are producible, maintainable, and compliant with applicable standards.
Essential Skills
- 1020 years of aerospace electrical equipment and system integration experience, including taking designs from conceptual level through production and aircraft installation.
- 1020 years of experience creating aerospace wiring interconnects, wiring schematics, and wiring harness drawings.
- Strong in integrating avionics, sensors, RF and radar systems, electrical and electromechanical equipment, and complex aircraft systems.
- Deep understanding of aircraft wiring and harness design, including wire routing, shielding, aerospace connectors, strain relief, and aircraft installation requirements.
- 10+ years of electrical design experience using CAD software such as AutoCAD, with the ability to create aircraft interface drawings, electrical schematics, wiring interconnects, and harness documentation.
- Experience generating Electrical Load Analyses, test plans, and Failure Modes Effects and Criticality Analyses (FMECA).
- Knowledge of aircraft design, analysis, certification, and regulatory requirements, including airworthiness documentation.
- Hands-on experience with test equipment such as meters, oscilloscopes, data acquisition systems, and other electrical and RF test instruments.
- Experience with aerospace wiring and installation requirements, EMI/EMC considerations, environmental standards, and aerospace connectors.
- Proficiency in troubleshooting electrical and RF anomalies and correlating test data with engineering requirements.
- Strong communication skills and demonstrated team-leadership experience in an engineering environment.
- Proficiency with Microsoft Word, Excel, and Teams for documentation, reporting, and collaboration.
Additional Skills & Qualifications
- Experience with RF co-site analysis and mitigation of RF interference issues.
- Knowledge of Radio Frequency (HERF) considerations and associated safety and design practices.
- Familiarity with system interface standards used in aerospace and defense applications.
- Detailed knowledge of military aircraft certification requirements and processes.
- Aerospace and defense programs, including exposure to radar, RF systems, and related technologies.
- Experience with project management activities such as planning, coordination, and status reporting.
- Exposure to firmware, quality inspection, and manufacturing processes related to aerospace hardware.
- Experience working with Department of Defense (DoD) programs and standards.
- Hands-on experience with RF test equipment, including calibration and use of signal generators and related instruments.
- Experience contributing to technical proposals and pricing efforts for engineering projects.
Work EnvironmentThis is a full-time, onsite role based in Brooksville, Florida, USA. The position operates primarily in an engineering and laboratory environment with direct access to aircraft hardware, test equipment, and production areas. You will work closely with cross-functional teams, including engineering, manufacturing, quality, and test personnel, and regularly interact with customers and regulatory stakeholders. The role involves less than 10% travel, with occasional domestic and international trips to support installation, training, and testing at customer sites. Relocation support is available for qualified candidates. The organization offers health, dental, and vision benefits, and provides opportunities to work across both established products and new-product development, with high technical ownership over aerospace electrical and RF integration throughout the product lifecycle. Job Type & LocationThis is a Contract to Hire position based out of Brooksville, FL. Pay and BenefitsThe pay range for this position is $50.00 - $80.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & LocationThis is a Contract to Hire position based out of Brooksville, FL. Application DeadlineThis position is anticipated to close on Nov 30, 2026. Workplace TypeThis is a fully onsite position in Brooksville,FL.About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.
Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.
More about this job
Skills
- Troubleshooting
- Documentation
- Data acquisition systems
- Troubleshoot
- Inspection
- Manufacturing processes
- Maintain electronic equipment
- ICT system integration
- Use CAD software
- Autodesk AutoCAD
- EMI
- Communication skills
- Team leadership
- Microsoft Word
- Microsoft Excel
- Microsoft Teams
- Reporting
- Collaboration
- Project management
- Firmware
- Communicate with customers