Jobs in the United States

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 12 mins ago
F
Test and Validation Engineer, High Voltage
Fluidstack
Austin, TX
- $210,000 to $270,000 USD / year
- Write the acceptance tests every production unit must pass, and the end-of-line test each unit runs before it ships.
Added 45 mins ago
BS
Engineering Leader - Optical Communications
Bright Silicon Technologies
Pleasanton, CA
- $175,000 to $275,000 USD / year
Lead system integration and validation across the LDA, vendor-provided modems, sensors, electronics, optics, and embedded software and firmware. Coordinate development and test plans…
Added 1 hour ago
AT
Process Engineer - Advanced
Agilent Technologies
Frederick, CO
- $103,200 to $161,250 USD / year
Support Validation activities including review of Factory Acceptance Test and Site Acceptance Test (FAT/SAT) protocols and participating in FAT/SAT execution, review of installation,…
Added 1 hour ago
J
DevOps Engineer
Jobgether
Remote, United States
- $115,000 to $155,000 USD / year
This position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a DevOps Engineer based in the United States.
Added 1 hour ago
Senior Machine Learning Engineer, Evaluation & Reliability
Bask Health
Remote, United States
We're looking for a Senior Machine Learning Engineer, Evaluation & Reliability to design, build, and maintain the systems that measure and improve the quality of Bask Health's AI-powered…
Added 1 hour ago
AI Sr Staff Engineer
Synopsys
Sunnyvale, CA
…benchmarks in a paper. The difference between a model that ships and one that gets shelved is usually in the evaluation framework, the data pipeline, or the post-training strategy, and you…
Added 1 hour ago
FPGA Engineer
Sovera Corporation
Remote, United States
As an FPGA Engineer at Sovera, you’ll design, develop, and test the digital systems behind our satellite network. Your work will support safety-critical logic, sensors, cryptography, and RF…
Added 1 hour ago
Principal Foundry Interface Design Engineer, HBM
Micron Technology, Inc.
Folsom, CA · Richardson, TX
Plan and implement technology evaluation test chips.
Added 1 hour ago
MT
NAND Custom Test Circuit Design Engineer
Micron Technology, Inc.
San Jose, CA
- $148,000 to $252,000 USD / year
As a NAND Custom Test Circuit Design Engineer, you will collaborate with Micron’s various design and verification teams all over the world and support the efforts of groups such as Product…
Added 1 hour ago
Sr Software Engineer II
Principal Financial Group
Des Moines, IA
Experience incorporating AI coding assistants (e.g., Cursor, Claude) into daily workflows to enhance delivery speed, test generation, and code quality, backed by rigorous review and…
Added 1 hour ago
J
Platform Engineer
Jobgether
Remote, United States
- $104,934 to $164,896 USD / year
This position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a Platform Engineer based in the United States.
Added 1 hour ago
Software Engineer – Mainframe (COBOL/PL1)
State Farm
Bloomington, IL · Dunwoody, GA · Richardson, TX · Tempe, AZ
This is an opportunity to do more than maintain existing applications. You'll solve complex business and technical problems, develop and enhance critical Fire capabilities, troubleshoot…
Added 1 hour ago
Test Engineer - Level 2 or Level 3
SP - Space Components
United States
Northrop Grumman’s Space Sector is seeking a Test Engineer - Level 2 or Level 3 to join our MEP Team in San Diego, California. This position is 100% onsite and cannot accommodate…
Added 1 hour ago
Product Engineer
Ensign-Bickford Aerospace & Defense Company
Moorpark, CA
The Manufacturing Engineer (ME) is the technical lead of the manufacturing processes of internal and external projects and is responsible for the implementation and execution of successful…
Added 1 hour ago
EU
EMV Product Test Engineer
Experis USA
Chicago, IL
- $45 to $50 USD / hour
Our client is seeking a EMV Product Test Engineer to join their team. As a EMV Product Test Engineer, you will be part of the Engineering team supporting Product Testing and Quality…
Added 1 hour ago
Simulation Engineer
Experis USA
Auburn Hills, MI
Our client, Automotive Technology is seeking a Simulation Engineer to join their team. As a Simulation Engineer, you will be part of the Virtual Vehicle Development organization supporting…
Added 1 hour ago
EU
Hardware Engineer - Python Automation & Board Bring-Up
Experis USA
Phoenix, AZ
- $59 to $63 USD / hour
Our client is seeking a Hardware Engineer - Python Automation & Board Bring-Up to join their team in Phoenix, Arizona. As a Hardware Engineer - Python Automation & Board Bring-Up, you’ll…
Added 1 hour ago
Robotics Test Engineer
Experis USA
Logan, UT
Our client is seeking a Robotics Test Engineer to join their team. As a Robotics Test Engineer, you will be part of the Engineering & Quality organization supporting an agile test team. The…
Added 2 hours ago
R-D Engineer II - CST - Fort Worth, TX (Onsite)
PSM Medtronic PS Medical Inc
Fort Worth, TX
Join our Neuroscience portfolio as an R&D Engineer II supporting the Medtronic Midas Rex product portfolio, with an initial focus on sustaining engineering for capital equipment. You will…
Added 2 hours ago
PN
Post Doctorate RA - Materials/Chemical Engineer
Pacific Northwest National Laboratory
Richland, WA
- $69,000 USD / year
Candidates must have received a PhD within the past five years (60 months) or within the next 8 months from an accredited college or university
Added 2 hours ago
Senior FPGA Prototyping Engineer
K2 Space
Remote, United States
We are seeking a Senior FPGA & Silicon Bring-up Engineer to accelerate the development of next-generation communications ASICs. You will own FPGA prototyping, firmware enablement,…
Added 2 hours ago
Journeyman Model Based Systems Engineer
Sabre Systems LLC
Patuxent River, MD
Must have a have a Technical BS or BA degree · Must have an active DoD Secret Clearance or higher
Added 2 hours ago
AI Platform Engineer
Avesis, LLC
Remote, United States
The Junior AI Platform Engineer assists with building, testing, and supporting enterprise AI solutions that use Retrieval-Augmented Generation (RAG), vector search, Azure AI services, and…
Added 2 hours ago
Production Engineer Cell Assembly (m/f/x)
Skeleton Technologies
San Jose, CA
Travel to China to conceptualize, define and test the new production line.
Added 2 hours ago
Senior ASIC Design Verification Engineer
K2 Space
Remote, United States
We are seeking a Senior ASIC Design Verification Engineer whose role will be to verify the functionality, performance, and robustness of our custom silicon designs. You will help define the…

Actalent

Industrial Engineering Analyst

Austin, TX, United States

$60 to $65 USD / hour

Apply on careers.actalentservices.com About employer

Applications open in a new tab.

Job details

Pay: $60 to $65 USD / hour
Experience: 7+ years of experience in industrial engineering analytics, manufacturing modeling, or operations analysis.
Posting language: English
Posted: Nov 9, 2026

Original job description

Job Title: Industrial Engineering Analytics EngineerLocation: Austin, TX Job DescriptionThe Industrial Engineering Analytics Engineer leads the development and application of advanced analytical models to improve manufacturing efficiency, capacity planning, and cost optimization in large-scale production environments. This role builds and manages integrated industrial engineering models that connect capacity, labor, material flow, and cost of goods sold to enable data-driven decision-making across factory and site operations. The position combines strong industrial engineering fundamentals with advanced analytics, simulation, business case development, and AI-driven systems to support both tactical and strategic manufacturing decisions.Responsibilities

Develop and own integrated industrial engineering models that connect capacity, labor, material flow, and cost of goods sold to support factory planning and operations.
Build and maintain capacity models that compare target, forecast, and gated capacity, incorporating cycle time, overall equipment effectiveness (OEE), yield losses, and bottleneck analysis.
Develop labor models to optimize headcount, utilization, and labor cost across production systems.
Create and evaluate business cases for capital investments, including ROI, IRR, NPV, and detailed cost-benefit analysis.
Lead cost of goods sold (COGS) modeling, including labor, overhead, scrap, and process-driven cost components.
Develop and track scrap and yield models, quantify cost impact, and identify opportunities for improvement.
Design and maintain OEE models that capture availability, performance, and quality to drive operational efficiency and continuous improvement.
Support factory layout, site planning, and material flow decisions through data-driven insights and modeling.
Perform scenario analysis and sensitivity studies to evaluate production strategies and capacity expansion plans.
Utilize and develop factory simulation models (such as FlexSim, AnyLogic, and similar tools) to analyze throughput, bottlenecks, and overall system performance.
Support factory ramp-up, equipment installation, and operational readiness through model validation and performance tracking.
Collaborate with manufacturing, operations, supply chain, finance, and engineering teams to align models with real-world constraints and business needs.
Translate complex analytical outputs into clear, executive-level insights and recommendations for stakeholders.
Work closely with MES and controls teams to integrate shop-floor data with industrial engineering models, ensuring accurate OEE measurement and enabling real-time, scalable dashboards for operational visibility and executive decision-making.
Introduce and implement AI-driven tools and platforms to enhance industrial engineering analytics and decision-making.
Design and manage scalable data models and data architecture for industrial engineering, capacity, labor, and cost analytics.
Develop standardized systems, frameworks, and governance for data modeling, analytics, and reporting across the organization.
Automate data collection, validation, and reporting pipelines using AI and advanced analytics tools.
Enable predictive analytics and intelligent decision-making for capacity, throughput, and cost optimization.
Establish best practices for data quality, model standardization, and system integration.
Build scalable models and analytics systems that support both tactical and strategic manufacturing decisions.
Manage multiple projects and priorities in a fast-paced environment while meeting deadlines and quality standards.

Essential Skills

Bachelors degree in Industrial Engineering, Mechanical Engineering, Operations Research, or a related field.
7+ years of experience in industrial engineering analytics, manufacturing modeling, or operations analysis.
Solid understanding of manufacturing systems, capacity planning, and industrial engineering principles.
Proven experience building end-to-end industrial engineering models integrating capacity, labor, cost, and material flow.
Hands-on experience with material flow optimization and warehouse integration.
Experience with factory simulation tools such as FlexSim, AnyLogic, or comparable platforms.
Demonstrated experience in business case development, including ROI, IRR, and NPV analysis.
Knowledge of COGS modeling, cost structures, and financial impact analysis.
Advanced proficiency in data analysis tools, including Excel (advanced modeling), Python, SQL, and Power BI/Tableau or similar reporting and dashboard tools.
Strong analytical and problem-solving skills with a data-driven mindset.
Ability to translate complex analysis into clear, executive-level insights and recommendations.
Ability to work effectively across cross-functional teams and influence decision-making.
Attention to detail combined with a systems-level understanding of manufacturing operations.
Ability to manage multiple projects and priorities in a dynamic, fast-paced environment.

Additional Skills & Qualifications

Familiarity with AI and machine learning applications in manufacturing analytics.
Experience introducing and implementing AI-driven tools and platforms to enhance industrial engineering analytics.
Experience designing scalable data models and data architecture for capacity, labor, and cost analytics.
Experience in developing standardized frameworks and governance for data modeling, analytics, and reporting.
Experience automating data collection, validation, and reporting pipelines using advanced analytics tools.
Familiarity with lean manufacturing and continuous improvement methodologies.
Strong communication skills to translate complex data into actionable insights for technical and non-technical stakeholders.
Ability to build scalable models and analytics systems that support both tactical and strategic decisions.

Job Type & LocationThis is a Contract position based out of Austin, TX. Pay and BenefitsThe pay range for this position is $60.00 - $65.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits

available for this temporary role may include the following:

Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & LocationThis is a Contract position based out of Austin, TX. Application DeadlineThis position is anticipated to close on Nov 20, 2026. Workplace TypeThis is a fully onsite position in Austin,TX.About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Apply on careers.actalentservices.com About employer

More about this job

Skills

Industrial engineering
Decision making
Process improvement
Supply chain management
MES
Data models
Data modelling
Reporting
ICT system integration
Mechanical engineering
Research
Develop business case
Data analysis
Microsoft Excel
Python
SQL
Microsoft Power BI
Tableau
Problem solving
Attention to detail
Lean manufacturing
Communication skills

Report this job

Work requirements

Jobs in the United States