Jobs in the United States

25+ jobs

Save this search

Added 1 min ago
CO
WATER UTILITY MECHANIC III (WATER UTILITY MECHANIC I-III)
City of Long Beach
Long Beach, CA
- $28.86 to $49.78 USD / hour
Added 5 mins ago
Operator II
St. Jude Medical, Cardiology Division, I
AZ
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 5 mins ago
Operator II
St. Jude Medical, Cardiology Division, I
AZ
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 5 mins ago
Senior Operator
St. Jude Medical, Cardiology Division, I
MN
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 7 mins ago
AL
Operator II
Abbott Laboratories
Scottsdale, AZ
- $14.85 to $29.65 USD / hour
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 7 mins ago
AL
Operator II
Abbott Laboratories
Scottsdale, AZ
- $14.85 to $29.65 USD / hour
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 7 mins ago
AL
Senior Operator
Abbott Laboratories
Minnetonka, MN
- $16.45 to $32.95 USD / hour
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 12 mins ago
Inspection Operator II (Conversion Artillery)
General Dynamics Ordnance & Tactical Systems
Hampton, AR
Coordinates calibration of test equipment and fixtures.
Added 12 mins ago
Inspection Operator II
General Dynamics Ordnance & Tactical Systems
Hampton, AR
Coordinates calibration of test equipment and fixtures.
Added 12 mins ago
Inspection Operator I
General Dynamics Ordnance & Tactical Systems
Hampton, AR
Coordinates calibration of test equipment and fixtures.
Added 16 mins ago
Switchboard Operator, Fiscal Services, PRN
Northwest Florida Community Hospital
Chipley, FL
Job Title: Patient Information / Switchboard Operator
Added 17 mins ago
Operations Supervisor
Catalent
St. Petersburg, FL
Responsible for monitoring on-time completion of all operator training requirements.
Added 20 mins ago
Line Op 2 - NIGHTS - NC - Entry Level Position
Paragon Films Inc
Township of Taylorsville, NC
POSITION SUMMARY: The Line Operator 2 serves as the front line of the production operation and is responsible for the basic operations of the extrusion lines and will assist with training…
Added 21 mins ago
RC
Forklift Operator PT
R+L Carriers
Wayland, MI · Grand Rapids, MI
- From $24.03 USD / hour
R+L Carriers has an immediate need for Part-time Forklift Operator at our Grand Rapids, MI service center. As a Forklift Operator, you will be tasked with moving all different types of…
Added 25 mins ago
A
Cnc Operator
Aerotek
Desoto, TX
- $52,000 to $60,840 USD / year
Translate written and verbal instructions into computer commands so the machines can perform the correct functions.
Added 30 mins ago
UC
Forklift Operator
USG Corporation
Aliquippa
- $26.85 to $34.32 USD / hour
· Ability to apply basic computer skills required for data entry and reporting.
Added 35 mins ago
BA
Director, Data Analytics & Intelligence
Bloom Ads Global Media
Woodland Hills, CA
- $125,000 to $150,000 USD / year
Design and oversee campaign measurement, test-and-learn programs, geo experiments, holdout tests, A/B tests, incrementality studies, and other causal measurement approaches.
Added 40 mins ago
PRINT OPERATOR | THUR-SAT
PCI Group Inc
Pineville, NC
Print all letter jobs as they are spooled to the OCE, Ricoh and/or Xerox printers. This includes re-prints, samples, and test jobs for programming.
Added 45 mins ago
Operator II
St. Jude Medical, Cardiology Division, I
AZ
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 45 mins ago
Operator II
St. Jude Medical, Cardiology Division, I
AZ
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 45 mins ago
Senior Operator
St. Jude Medical, Cardiology Division, I
MN
Works with a variety of production equipment, small hand tools, test equipment, and precision measuring instruments. Also uses standard office equipment such as telephone, fax/copier, and a…
Added 45 mins ago
SO
CDOC Only/General Maintenance-Mechanical Captain CSLTS III (Canon City)
State of Colorado
Cañon City, CO
- $6,484 to $9,080 USD / month
…monitors and operates Building Automatic System (BAS) and other computer/microprocessor based systems such as electronic work order…
Added 45 mins ago
Distribution System Operator I - PA Distribution Operations - Reading-Pottsville Pk
FirstEnergy
Reading, PA
…of the correct answers. It's important to take the practice test as you would the actual one, with similar intensity and concentration. You must have Adobe Acrobat Reader on your…
Added 46 mins ago
Security Technology Engineer
Texas Instruments
Dallas, TX
Support the consolidation of regional Security Communications Centers into the GSOC, ensuring standardization, interoperability, resiliency, and a consistent operator experience
Added 47 mins ago
A
Controls Engineer
Actalent
Kansas City, MO
- $40 to $45 USD / hour
Design logic for control systems and smart displays, ensuring clear operator interfaces and reliable functionality.

Actalent

Controls Engineer

Kansas City, MO, United States

$40 to $45 USD / hour

Apply About employer

Applications open in a new tab.

Job details

Pay: $40 to $45 USD / hour
Experience: 5+ years of industry experience working for a systems integrator, including control panel and circuit design.
Posting language: English
Posted: Nov 2, 2026

Original job description

Job Title: Controls EngineerJob DescriptionThe Controls Engineer designs, programs, and commissions industrial automation control systems from concept through start-up. This role combines detailed electrical and controls design work with on-site integration, commissioning, and support at manufacturing facilities, with a strong focus on automotive applications and systems integration.Responsibilities

Perform the complete design of automation control systems, including electrical and controls architecture for industrial applications.
Review project specifications, internal standards, and industry standard practices to ensure compliance and alignment with customer requirements.
Develop non-standard control system designs when required by project scope or customer needs.
Follow internal and customer standards for hardware, software, and documentation throughout the design and implementation process.
Create system map layouts and define the sequence of operations for automated equipment and processes.
Develop complete drawing packages, including control panel layouts, wiring diagrams, and field device schematics.
Program PLC logic and design HMI screens to meet functional and operational requirements.
Specify control panel and field materials by creating detailed electrical bills of materials.
Assist with installation oversight at customer facilities to ensure proper implementation of designed systems.
Support system startup and debugging at customer sites, resolving issues and optimizing performance.
Provide launch and standby support during production ramp-up to ensure reliable operation of control systems.
Perform system integration activities, including start-up, commissioning, and rework of automation systems.
Review cycle time studies and dimension switch layouts to validate system performance and ensure design meets production goals.
Design logic for control systems and smart displays, ensuring clear operator interfaces and reliable functionality.
Apply knowledge of system architecture, including non-standard materials, control panel power requirements, and power distribution.
Review and interpret specifications, internal hardwired and logic standards, general specifications, and scope of work documents.
Assist with installation and debugging activities independently, without requiring additional technical support.
Collaborate with project teams while also working autonomously to meet project deadlines and quality standards.
Travel to customer manufacturing facilities for on-site design validation, integration, commissioning, and support.
Perform physical tasks on job sites, including climbing ladders, walking job sites, and carrying a laptop while inspecting equipment and systems.

Essential Skills

Relevant bachelors or associate degree in engineering or technology, or equivalent relevant work experience with a technical degree.
5+ years of industry experience working for a systems integrator, including control panel and circuit design.
Hands-on experience with non-standard designs, system map layouts, and sequence of operations for automated systems.
Experience reviewing cycle time studies and designing dimension switch layouts to meet production requirements.
Ability to create complete design packages, including design logic, entry logic, and smart display designs.
Strong knowledge of system architecture, including non-standard material selection, control panel power requirements, and power distribution.
Ability to review and apply specifications and standard practices, including internal hardwired and logic standards, general specifications, and scope of work.
Proficiency with RSLogix 5 and RSLogix 5000 for PLC programming.
Proficiency with RSNetWorx for network configuration and diagnostics.
Experience with DriveExecutive and related drive configuration tools.
Ability to assist with installation and debugging independently, without additional technical support.
Ability to work both independently and in a team-oriented environment.
Willingness and ability to travel to customer sites as needed.
Ability to climb a two-story ladder safely.
Ability to walk a mile in approximately 20 minutes and cover a reasonable distance on foot at job sites.
Ability to lift up to 30 pounds without difficulty, including while carrying a laptop computer.

Additional Skills & Qualifications

Experience in automotive manufacturing environments and systems integration.
Familiarity with Ford NextGen standards.
Familiarity with GM G12 standards.
Proficiency with Microsoft Office Suite for documentation, reporting, and communication.
Experience with start-up, commissioning, and rework of complex automation systems.
Strong problem-solving skills and the ability to troubleshoot electrical and controls issues under time constraints.
Effective communication skills for working with cross-functional teams and customer personnel.
Comfort working autonomously in the field while maintaining alignment with project objectives and standards.

Work EnvironmentThe role combines office-based design work with on-site activities at manufacturing facilities. A portion of responsibilities involves working at a computer to create electrical and controls designs, system map layouts, sequence of operations, drawing packages, PLC logic, HMI screens, and start-up processes. The remainder of the role takes place on customer sites, typically at automotive and industrial manufacturers, performing controls integration, commissioning, start-up, debugging, and rework of automation systems. The work environment includes time on the plant floor around industrial equipment, requiring the ability to climb ladders, walk significant distances, and carry a laptop while inspecting and troubleshooting systems. Travel to various customer locations is required, and work may occasionally occur during off-hours or production downtime to support installation and launch activities. Attire is typically appropriate for both office work and industrial environments, with adherence to standard safety practices and personal protective equipment requirements at job sites. Job Type & LocationThis is a Contract to Hire position based out of Kansas City, MO. Pay and BenefitsThe pay range for this position is $40.00 - $45.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits

available for this temporary role may include the following:

Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & LocationThis is a Contract to Hire position based out of Kansas City, MO. Application DeadlineThis position is anticipated to close on Nov 16, 2026. Workplace TypeThis is a fully onsite position in Kansas City,MO.About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Apply About employer

Report this job