Jobs in the United States

25+ jobs

Save this search

Added just now
Visualization Engineer
CAE USA Inc
Arlington, TX
Added just now
Sr AI & Automation Engineer
INSPYR Solutions
Deerfield Beach, FL
Senior engineer responsible for designing, building, and operating AI and automation solutions that streamline high-volume operational work across the enterprise.
Added just now
Network Engineer Senior
Applied Research Solutions
Jbsa Lackland, TX
Applied Research Solutions is seeking a full-time Network Engineer Senior, at Lackland AFB-San Antonio, TX.
Added just now
ELECTRONICS ENGINEER
U.S. Air Force - Agency Wide
Kirtland AFB, NM
…focused on component evaluation, system validation, and hardware-software integration of test, assessment, and experiment instrumentation equipment. Responsibilities - Embedded Systems…
Added 1 min ago
RF Electrical Engineer (R&D Engineer 1/2)
Los Alamos National Laboratory
Los Alamos, NM
This position will be filled at either the R&D Engineer 1 or 2 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if…
Added 1 min ago
Linux Systems Administrator
Fuse Engineering LLC
Laurel, MD
We are seeking a highly skilled Systems Administrator / Infrastructure Engineer to support, maintain, and optimize complex enterprise infrastructure environments. The ideal candidate will…
Added 1 min ago
R&D Engineer 1
Los Alamos National Laboratory
Los Alamos, NM
Added 1 min ago
Nuclear Facilities Engineer 2/3 (Mechanical Project Engineer)
Los Alamos National Laboratory
Los Alamos, NM
This position will be filled at either the Nuclear Facilities Engineer 2/3 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be…
Added 1 min ago
Systems R&D Engineer 2/3
Los Alamos National Laboratory
Los Alamos, NM
This position will be filled at either the R&D Engineer 2 or 3 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if…
Added 1 min ago
R&D Engineer 2/3
Los Alamos National Laboratory
Los Alamos, NM
This position will be filled at either the R&D Engineer 2 level or the R&D Engineer 3 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined…
Added 1 min ago
Cleared Senior/Principal RD Systems Engineer - Mobile Guardian Transporter Quality, Hybrid
Sandia National Laboratories
Albuquerque, NM
Added 1 min ago
Software Engineer II - Marketplace Efficiency (Bidding)
Indeed
Albuquerque, NM
As a Software Engineer II at Indeed, you will design and build software that powers shared platforms, servic
Added 1 min ago
Cleared Senior/Principal RD Systems Engineer - Surety Systems Engineering, Onsite
Sandia National Laboratories
Albuquerque, NM
Added 1 min ago
EC
Lead Power Systems Controls Engineer
Eaton Corporation
Albuquerque, NM
- $97,000 to $143,000 USD / year
Added 1 min ago
Senior Financial Planning & Analysis Manager
Cornerstone OnDemand
Albuquerque, NM
Added 1 min ago
O
Principal Site Reliability Automation Developer - US REMOTE
Oracle
Santa Fe, NM
- $102,300 to $209,500 USD / year
Added 1 min ago
O
Senior Platform Software Engineer - OCI
Oracle
Santa Fe, NM
- $92,500 to $209,500 USD / year
Oracle Cloud Infrastructure (OCI) is looking for a Senior Platform Software Engineer to join the PKI team responsible for building and operating cloud-scale Public Key Infrastructure…
Added 1 min ago
Staff Full-stack Engineer - Shopping (Remote-eligible)
Capital One
Santa Fe, NM
As a Staff Engineer at Capital One, you will be part of a community of technical experts working to define the future of banking in the cloud. You will work alongside our talented team of…
Added 1 min ago
Senior Software Engineering
Pearson
Santa Fe, NM
As an Senior Software Engineering, you will serve as a senior technical owner and hands-on engineer responsible for designing, building, operating, and evolving scalable software solutions…
Added 1 min ago
Senior Staff Engineer - Agentic Identity
Cisco
Santa Fe, NM
Added 1 min ago
Frontend Engineer
GN Hearing
Santa Fe, NM
Help create seamless digital experiences that support people on their hearing journey. As a Frontend Engineer , you will build and evolve customer-facing web experiences for Jabra Enhance,…
Added 1 min ago
C
Senior QA Automation Engineer - Playwright & Selenium
Cognizant
Santa Fe, NM
- $50,000 to $92,500 USD / year
We are seeking a Senior QA Automation Engineer - Playwright & Selenium to join our Quality Engineering team supporting critical financial applications. The ideal candidate will have strong…
Added 1 min ago
Sr Site Reliability Engineer -Remote US
SitusAMC
Santa Fe, NM
Added 1 min ago
Core Senior .NET Software Engineer
Evolent
Santa Fe, NM
Added 1 min ago
Supply Chain Capacity Engineer
Meta
Santa Fe, NM
Meta is seeking a Planning & Capacity Engineer to join the Infrastructure Supply Chain and Engineering (ISCE) Planning team to focus on planning optimization for all of Meta’s…

Actalent

Composites Engineer

Greenville, SC, United States

Pay and BenefitsThe pay range for this position is $43.26 - $52.88/hr.

Apply About employer

Applications open in a new tab.

Job details

Pay: Pay and BenefitsThe pay range for this position is $43.26 - $52.88/hr.
Posting language: English
Posted: Nov 4, 2026

Original job description

Description

We are looking for a composites engineer with a few years of hands-on experience who is ready to own parts and processes from start to finish. You'll lead the engineering work on assigned components across design, process development, manufacturing, and testing, working closely with production, quality, and program teams.

This is still a hands-on role. Expect to split your time between engineering work (CAD, analysis, documentation) and the production floor (process development, first-article builds, troubleshooting). You'll make technical decisions with less day-to-day oversight, help develop newer engineers and technicians, and represent engineering to customers on your parts.

Key Responsibilities:

Own the design and development of composite parts and assemblies, from concept through production release, including design-for-manufacturability and tooling input. Develop, qualify, and improve manufacturing processes including hand layup, vacuum bagging, autoclave and oven cure, resin infusion, trimming, and finishing. Perform structural analysis (hand calculations and FEA) and material evaluations independently, bringing complex problems to senior engineers for review. Lead prototype and first-article builds, run root-cause investigations on production issues, and drive corrective actions that reduce defects, cost, and cycle time. Write and maintain work instructions, process specifications, and quality documentation, and review documents prepared by Engineer I staff. Support the material review process by evaluating and dispositioning nonconforming parts and materials. Plan material and part test programs, analyze results, and present findings to internal teams and customers. Serve as the engineering point of contact for assigned parts or programs, coordinating with design, production, quality, and customers on technical, cost, and schedule commitments. Mentor Engineer I staff and technicians, and share composites knowledge across the team. Follow safety and compliance standards, and lead by example in keeping the work area safe and organized.

Skills

composite manufacturing, corrective action plans, gd&t, root cause analysis, solidworks, cad software, abaqus, ansi, as9100, as9102, catia, composite, fibersim, finite element model, nastran, ultrasonic testing, x ray

Top Skills Details

composite manufacturing,corrective action plans,gd&t,root cause analysis,solidworks,cad software

Additional Skills & Qualifications

Experience with composite design and analysis tools such as CATIA Composites Design, Fibersim, or FEA packages (Abaqus, ANSYS, Femap/Nastran). Experience with mechanical testing methods (tensile, compression, flexural, interlaminar shear, etc.) and nondestructive inspection (ultrasonic, X-ray, etc.). Experience working within AS9100 quality systems, including first article inspection (AS9102) and material review. Experience with tooling design or process qualification for new parts. A master's degree in a related field, which may count toward the experience requirement.

Experience Level

Intermediate Level

Job Type & LocationThis is a Contract to Hire position based out of Greenville, SC. Pay and BenefitsThe pay range for this position is $43.26 - $52.88/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits

available for this temporary role may include the following:

Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & LocationThis is a Contract to Hire position based out of Greenville, SC. Application DeadlineThis position is anticipated to close on Nov 18, 2026. Workplace TypeThis is a fully onsite position in Greenville,SC.About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Apply About employer

Report this job