Jobs in the United States

25+ jobs

Save this search

Added 1 min ago
Systems Test Engineer
Raydar
San Francisco, CA
Added 1 min ago
Senior Software Engineer
Raydar
San Francisco, CA
- Design test suites and evaluation methods that score accuracy, technical correctness, source traceability and practical value.
Added 1 min ago
AF
Test Engineer I (58338)
ATS FAMILY
COLORADO SPRINGS, CO
- $70,000 to $80,000 USD / year
Creates test report containing procedures used, photographs, and other documentation and data.
Added 2 mins ago
GO
Systems Engineer
G2 Ops, Inc.
Virginia Beach, VA
- $90,000 to $140,000 USD / year
…challenges. We are seeking a motivated, collaborative Senior Systems Engineer to support the Navy's AEGIS Weapon System and associated combat system elements, with a focus on Model-Based…
Added 2 mins ago
GO
Systems Engineer
G2 Ops, Inc.
Arlington, VA
- $100,000 to $140,000 USD / year
…challenges. We are seeking a motivated, collaborative Senior Systems Engineer to support the Navy's AEGIS Weapon System and associated combat system elements, with a focus on Model-Based…
Added 3 mins ago
Engineering Technician VI
Trinzic
Townsend, GA
Consults with supervisor or professional engineer to solicit advice on unusual or controversial problems or policy matters. Completed work is reviewed for compliance with overall project…
Added 3 mins ago
Electrical Engineer Asc - E1
Lockheed Martin
Kings Bay, GA
Lockheed Martin is seeking an entry level Electrical Engineer within the Test Engineering organization to support the Fleet Ballistic Missile (FBM) Program located at Strategic Weapons…
Added 3 mins ago
S
Assembly MES Engineer
Siemens
Peachtree Corners, GA
- $70,894 to $121,533 USD / year
The MES Assembly Engineer is responsible for the maintaining and enhancing technology deployments relevant to the assembly of products. The MES Assembly Engineer will be part of a team that…
Added 3 mins ago
Field Welding Engineer / NDE Coordinator
Bechtel
Thacker Pass, NV
…support. You will manage, inspect, and monitor the welding test lab, the rod room, the weld heat treatment program, and the laboratory quality plan. Your technical advice will help ensure…
Added 3 mins ago
RF / Radar Systems Engineer (EW test / Threat research / Threat intelligence)
Insight Global
Smyrna, GA
-Configure, operate, and troubleshoot RF test equipment and simulation tools in laboratory and test environments
Added 3 mins ago
Network Security Engineer
Georgia Systems Operations
Tucker, GA
Engineer Secure, Resilient Network Services That Support Mission-Critical Operations
Added 3 mins ago
Senior Logistics Specialist
Leidos
Warner Robins, GA
…of Mission Critical Computer Resources (MCCR) and Automatic Test Equipment (ATE) software for all assigned prime system and equipment for all echelons of maintenance…
Added 3 mins ago
Parts, Materials, and Processes Obsolescence Engineer
a.i. solutions
Huntsville, AL
…nature when working towards completion of his/her tasks. The engineer will support the Missile Defense Agency (MDA) Quality, Safety and Mission Assurance (QS) Directorate providing Parts,…
Added 3 mins ago
Associate Manufacturing Test Engineer (2nd shift)
Carrier
Kennesaw, GA
The Associate Manufacturing Test Engineer will create the roadmap for the entire production test environment and develop implementation strategies. The primary roles and responsibilities of…
Added 3 mins ago
T
Physical Security Engineer
TEKsystems
Alpharetta, GA
- $55 to $65 USD / hour
This role supports global physical security technology infrastructure for LexisNexis Risk, a division of RELX. The engineer will administer and maintain enterprise access control systems,…
Added 3 mins ago
Program Quality Engineer Staff - E4
Lockheed Martin
Marietta, GA
Prior product design, manufacturing planning, quality engineering/assurance, inspection, and test and/or supply chain management experience
Added 3 mins ago
T
Devops Automation Engineer
TEKsystems
Augusta, GA
- $60 to $63 USD / hour
As the DevOps Automation Engineer, the individual will be responsible for designing, implementing, and managing automation solutions that enhance the efficiency, reliability, and…
Added 3 mins ago
PT
NC Engineer
PDS Tech Commercial
Savannah, GA
- $58.68 USD / hour
Engineer the Future of Aerospace Manufacturing!
Added 3 mins ago
Automation Engineer 4 (SDET/API automation)
U.S. Bank
Atlanta, GA
The Automation Engineer tests, creates, implements and desktop automations. Performs design, scripting, testing, implementing, maintaining and modifying automations of moderate complexity,…
Added 3 mins ago
Lead Software Engineer (Full Stack)
U.S. Bank
Atlanta, GA
Added 3 mins ago
O
Associate Support Engineer
Oracle
Atlanta, GA
- $21.3 to $45.05 USD / hour
…delivery and product certification to research, re-create, and test technical issues for assigned product area(s) reported by customers to identify a resolution, with minimal…
Added 4 mins ago
ND
Enablement Engineer
NTT Data Americas, Inc.
Atlanta, GA
- $70 to $80 USD / hour
…now. NTT DATA's Client is currently seeking an AI Enablement Engineer to join their team in Charlotte, North Carolina (US-NC), United States…
Added 4 mins ago
Software Engineer II
Amentum
Atlanta, GA
The Software Engineer II will perform full stack development with C# program, ReactJS, MVC, Linq, and rest API development in NET Core platform. This position is US remote teleworking…
Added 4 mins ago
RS Qual Eng II
Gulfstream
Savannah, GA
Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of Gulfstream suppliers or facilities…
Added 4 mins ago
EG
Workday Adaptive Planning Engineer
Eliassen Group
Atlanta, GA
- $65 to $75 USD / hour
Our client is seeking a Workday Adaptive Planning Engineer to design, build, and maintain financial planning and forecasting solutions. The role partners with FP&A, Accounting, and Finance…

Actalent

CNC Programmer

Greenville, SC, United States

Pay and BenefitsThe pay range for this position is $45.00 - $50.00/hr.

Apply About employer

Applications open in a new tab.

Job details

Pay: Pay and BenefitsThe pay range for this position is $45.00 - $50.00/hr.
Posting language: English
Posted: Nov 5, 2026

Original job description

Job Title: CAD/CAM CNC ProgrammerJob DescriptionThis Manufacturing Engineer role focuses on setting up, programming, and operating CNC lathes in a heavy-duty shop environment that supports large-scale power generation equipment and their subassemblies. You will work directly with advanced CNC machinery, interpret complex engineering blueprints, and ensure that close tolerance requirements are consistently achieved. The position combines hands-on machining, CNC programming, and continuous improvement activities within a modern, well-invested facility serving the growing energy sector.Responsibilities

Set up and operate CNC lathes in a shop environment to support production of large-scale power generation components and subassemblies.
Read, interpret, and edit CNC programs to ensure quality, throughput, and equipment efficiency goals are consistently achieved.
Utilize G and M code experience to program and adjust CNC lathes, ensuring accurate and efficient machining operations.
Interpret engineered blueprint drawings and work instructions to determine machining requirements and sequence of operations.
Apply a solid understanding of geometric dimensioning and tolerancing (GD&T) to meet design intent and ensure parts conform to specifications.
Set up and safely use various inspection tools and gauges, including inner diameter (I/D) and outer diameter (O/D) micrometers, calipers, Pi-tape, bore gauges, Tri-mics, and thread gauges.
Verify that close tolerance requirements in the range of approximately 0.0005" to 0.005" are consistently achieved by the machines.
Determine optimal machining feeds, speeds, and tool selections to balance part quality, tool life, and production efficiency.
Program and operate CNC lathes using Mazatrol controls, including vertical turning lathes, for large and complex components.
Follow detailed blueprints and work instructions to program lathes for the manufacture and service of large-scale power generation equipment and their subassemblies.
Contribute to lean manufacturing initiatives by identifying waste, improving workflow, and supporting standardized work practices.
Support continuous improvement efforts by recommending process enhancements, tooling changes, and programming optimizations.
Collaborate with engineering and production teams to troubleshoot machining issues and ensure that quality and delivery targets are met.

Essential Skills

Proven experience setting up and operating CNC lathes in a production or heavy-duty shop environment.
Demonstrated ability to read, interpret, and edit CNC programs to improve quality and efficiency.
Hands-on experience with G and M codes for CNC programming and machine operation.
Strong blueprint interpretation skills, including the ability to understand complex engineered drawings.
Working knowledge of geometric dimensioning and tolerancing (GD&T) and its application in machining.
Ability to set up and accurately use inspection tools and gauges such as I/D and O/D micrometers, calipers, Pi-tape, bore gauges, Tri-mics, and thread gauges.
Capability to achieve and maintain close machining tolerances in the range of approximately 0.0005" to 0.005".
Experience determining appropriate machining feeds, speeds, and cutting tools for various materials and operations.
Familiarity with Mazatrol controls and operation of vertical turning lathes.
Experience following blueprints and work instructions to program and run CNC lathes for large-scale equipment.
Preferably an associate degree or machinist-related certification with 3+ years of relevant experience, or 4+ years of experience without a formal degree or certification.
Experience in lean manufacturing and continuous improvement practices.

Additional Skills & Qualifications

Associate degree in a technical, manufacturing, or machining-related field, or a machinist-related certification (preferred).
At least 3+ years of machining or CNC lathe experience with a relevant degree/certification, or 4+ years of experience without formal credentials.
Experience working with large-scale power generation equipment, such as components for gas or wind turbines.
Exposure to heavy-duty plant engineering environments and large, complex systems.
Demonstrated participation in lean manufacturing initiatives and continuous improvement projects.
Comfort working with advanced equipment, systems, and controls in a high-precision manufacturing setting.

Work EnvironmentThe role is based in a heavy-duty plant engineering environment focused on large systems for the power industry, including gas and wind turbine components and related subassemblies. You will work in a large, modern facility that is receiving significant investment and ongoing work, providing access to advanced CNC equipment, Mazatrol-controlled lathes, vertical turning lathes, and sophisticated inspection tools. The facility supports the growing energy sector, including applications for data centers, electric vehicles, and other large-scale power generation needs. The environment emphasizes lean manufacturing, continuous improvement, and collaboration across engineering and production teams. Work is performed in a shop setting around large machinery and heavy components, with appropriate industrial attire and safety gear required in accordance with plant safety standards.AC Job Type & LocationThis is a Contract position based out of Greenville, SC. Pay and BenefitsThe pay range for this position is $45.00 - $50.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits

available for this temporary role may include the following:

Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & LocationThis is a Contract position based out of Greenville, SC. Application DeadlineThis position is anticipated to close on Nov 19, 2026. Workplace TypeThis is a fully onsite position in Greenville,SC.About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

San Francisco Fair Chance Ordinance:

Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):

We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Apply About employer

Report this job