Jobs in the United States

25+ jobs

Save this search

Added 53 mins ago
Sr. Apparel Product Developer
Varsity Brands, LLC
Farmers Branch, TX
…driving the development of seasonal products from concept through production readiness. You will be the expert for your category and will work with internal / external teams where you are…
Added 1 hour ago
G
Senior Maintenance Technician
Grundfos
Brookshire, TX · Houston, TX · Katy, TX
- $26.05 to $34.5 USD / hour
Support new assembly projects, engineering works, and production equipment setup while driving automation, yield improvement, and cost reduction initiatives
Added 1 hour ago
G
Senior Maintenance Technician
Grundfos
Brookshire, TX · Houston, TX · Katy, TX
- $26.05 to $34.5 USD / hour
Support new assembly projects, engineering works, and production equipment setup while driving automation, yield improvement, and cost reduction initiatives
Added 1 hour ago
Interconnect Hardware Engineer
NVIDIA Corporation
North District, IL
Work with Design and Manufacturing Engineering teams to develop the most robust test solution for mass production
Added 1 hour ago
Senior Hardware System Engineer
NVIDIA Corporation
North District, IL
NPI to Mass Production Expertise: A track record of solving technical problems during the transition from prototype to high-volume manufacturing.
Added 1 hour ago
Senior System Management Architect
NVIDIA Corporation
North District, IL
Cross-Functional Leadership: Collaborate tightly with Production teams, Hardware and Firmware Engineering, NIC FW/Driver teams, and QA to translate your architectural specifications into…
Added 1 hour ago
Senior System Management Architect
NVIDIA Corporation
North District, IL
Cross-Functional Leadership: Collaborate with Production, Hardware and Firmware Engineering, ASIC FW/Driver teams, SW/NOS teams and QA to translate architectural specifications into…
Added 1 hour ago
Senior Hardware Engineer
NVIDIA Corporation
North District, IL
Our Networking team in Israel is looking for an expert system/board designer to join the Hardware NVLINK Group. The team leads the development of GPU networking infrastructure for NVIDIA…
Added 1 hour ago
Senior Opto-Mechanical Failure Analysis Engineer
NVIDIA Corporation
North District, IL
We are looking for a Senior Opto-mechanical failure analysis expert to join our mechanical engineering department as a key player in the development of next generation high-performance…
Added 3 hours ago
A
Engineering Manager
Actalent
Taunton, MA
- $130,000 to $160,000 USD / year
Partner with Design Engineering teams to transition products from design into production.
Added 6 hours ago
EC
Product Line Applications Engineer
Eaton Corporation
Arden, NC
- $113,000 to $165,000 USD / year
The Product Line Application Engineer serves as the technical expert for medium voltage motor controls and rives product lines, supporting customers, sales teams, engineering,…
Added 6 hours ago
Manufacturing Process Control Engineer APVD/PCVD
US0767 Prysmian Cables and Systems Usa LLC
Claremont, NC
As a world leader in telecom cable systems, the Prysmian Group's Claremont fiber manufacturing plant is seeking a highly motivated, self-starter, developing leader to join the engineering…
Added 8 hours ago
Staff Mechanical Engineer
Empirical Systems Aerospace, Inc.
San Luis Obispo, CA
…Staff Mechanical Engineer will produce 3D models, drawings, and engineering documentation; perform structural and thermal analyses; and collaborate closely with internal teams, suppliers,…
Added 9 hours ago
Senior Equipment Engineer, AMZL
Amazon.com Services LLC
Nashville, TN · Bellevue, WA
We are looking for a hands-on leader with experience in any of the following areas; Production Part Approval Process (PPAP), Manufacturing/Mechanical Plant Engineering, First Article…
Added 9 hours ago
DM
Assembler
Dexter Magnetic Technologies
Elk Grove Village, IL
- $18 to $19 USD / hour
Added 10 hours ago
SA
Senior In-Process Quality Inspector
Saab Automobile AB
Enterprise, OR
- $28.8 to $34.57 USD / hour
Validate visually and dimensionally that the product meets requirements as specified in engineering drawings.
Added 10 hours ago
TT
Associate Director, Technical Operations - Drug Product
Travere Therapeutics
Denver, CO
- $150,000 to $195,000 USD / year
Education/Experience Requirements: * Bachelor's degree in Chemistry, Pharmaceutical Sciences, Biochemistry, Chemical Engineering, or other related discipline required. Equivalent…
Added 10 hours ago
TT
Associate Director, Technical Operations (Small Molecule CMC)
Travere Therapeutics
Denver, CO
- $150,000 to $195,000 USD / year
…technical oversight for small molecule API development and manufacturing activities conducted at Travere CDMOs. This role is a critical contributor within Technical Operations (CMC) and…
Added 11 hours ago
Manufacturing Equipment Engineer, Energy (Night Shift)
Tesla, Inc.
BUFFALO, NY
What to ExpectThe Night Shift Equipment Engineer on the Production Engineering team will be a part of operating, sustaining, and improving the manufacturing equipment at Tesla's Gigafactory…
Added 13 hours ago
Ergonomist / Occupational Safety Engineer, BlueOval Battery Park Michigan
Ford Motor Company
Marshall, MI
This role will partner with Production, Manufacturing Engineering, Industrial Engineering, Material Planning & Logistics, Safety, Medical, and the Local Ergonomics Committee to identify,…
Added 13 hours ago
Process Quality Engineer, Process Quality Control, BlueOval Battery Park Michigan
Ford Motor Company
Marshall, MI
…once-in-a-lifetime opportunity to launch a state-of-the-art manufacturing facility from the ground up. Imagine: you, at the forefront of the electrification movement, helping to bring the…
Added 13 hours ago
Product Development Engineer - Exterior Structural Castings
Ford Motor Company
Dearborn, MI
…execution and industrialization phase of the program, generate Core engineering documentation to continuously improve our casting systems, support other less experienced engineers with CAD…
Added 13 hours ago
Controls Implementation Engineer
Ford Motor Company
Dearborn, MI
In this role, you’ll support the implementation of controls solutions for powertrain manufacturing equipment, including CNC machining and related electrical systems. You’ll work with…
Added 13 hours ago
Exterior Structural Casting Technical Specialist
Ford Motor Company
Dearborn, MI
10 years’ experience in automotive engineering and/or manufacturing (or like industry), including direct team leadership responsibility for the delivery of structural castings.
Added 13 hours ago
Laser Welding Engineer
Ford Motor Company
Dearborn, MI
You will work closely with cell engineering, pack design, manufacturing, controls/automation, quality, and supplier partners to deliver robust, scalable laser welding solutions for Ford’s…

Actalent

Case Engineer

Kingsville, MO, United States

The pay range for this position is $80000.00 - $120000.00/hr.

Apply About employer

Applications open in a new tab.

Job details

Pay: The pay range for this position is $80000.00 - $120000.00/hr.
Experience: At least 3 years of experience in manufacturing engineering, process engineering, or ammunition/munitions engineering.
Posting language: English
Posted: Oct 17, 2026

Original job description

Job Title: Case Engineer

Job Description

The Case Engineer develops and improves manufacturing processes used to produce metallic cartridge cases across multiple calibers. This role serves as a technical subject-matter expert for case-forming operations, production equipment, process safety, and manufacturing optimization. By working closely with Operations, Quality, Program Management, and external stakeholders, the Case Engineer supports reliable production, consistent product quality, and compliance with energetic and industrial manufacturing requirements.

Responsibilities

Develop, implement, and optimize manufacturing processes for metallic cartridge cases, including case draw, neck, trim, ream, wash, and related operations.
Create, update, and maintain detailed work instructions, standard operating procedures, process documentation, and supporting forms for both energetic and non-energetic manufacturing processes.
Serve as a subject-matter expert in metallic case manufacturing and identify, evaluate, and source equipment required to process and produce metallic components.
Set up, optimize, and support production equipment and manufacturing lines, including draw presses, forming presses, trim machines, wash lines, and other specialized machinery.
Develop process hazard analyses and safety procedures in alignment with BATFE and OSHA requirements and support compliance with DoD 4145 energetic safety standards and DoD 5100 security standards.
Conduct research, experimentation, and process development activities to improve component processing, performance, quality, and manufacturability.
Design, implement, and lead non-destructive and destructive testing programs to evaluate components and support exploratory efforts on new munitions, devices, components, and systems.
Support Program Management and Quality Assurance by preparing and delivering technical reports and by participating in Physical Configuration Audits, First Article Acceptance Tests, and Lot Acceptance Tests.
Collaborate with cross-functional teams to drive continuous improvement initiatives in metallic forming and cartridge-case manufacturing processes.
Provide hands-on troubleshooting support for manufacturing equipment and processes to resolve production issues and enhance operational efficiency.

Essential Skills

Bachelors degree in Engineering or a closely related technical discipline.
At least 3 years of experience in manufacturing engineering, process engineering, or ammunition/munitions engineering.
Hands-on experience developing, implementing, or improving manufacturing processes for metallic components or similar precision-manufactured products.
Practical experience with metallic forming or cartridge-case manufacturing processes, including drawing, forming, necking, reaming, and washing.
Experience setting up, optimizing, and troubleshooting manufacturing equipment such as draw presses, forming presses, trim machines, and wash lines.
Proven ability to develop clear and accurate work instructions, standard operating procedures, and other technical process documentation.
Strong knowledge of continuous improvement principles applied to manufacturing processes.
Technical understanding of metallic component forming and cartridge-case manufacturing in an ammunition or munitions environment.
Awareness of safety practices and regulatory considerations related to energetic and industrial manufacturing operations.

Additional Skills & Qualifications

Experience in ammunition or munitions manufacturing environments.
Experience in research and development focused on improving manufacturing processes, product performance, and quality.
Familiarity with non-destructive and destructive testing methods for metallic components and munitions.
Ability to support technical reporting and formal test events such as Physical Configuration Audits, First Article Acceptance Tests, and Lot Acceptance Tests.
Exposure to compliance frameworks and safety standards relevant to BATFE, OSHA, DoD 4145 energetic safety, and DoD 5100 security.
Strong problem-solving skills and the ability to work autonomously while proposing and implementing process improvements.
Interest in working with proprietary new product lines and contributing to the development of specialized munitions manufacturing capabilities.
Closest market comparison: Manufacturing Engineer or Process Engineer with specialization in metal forming and munitions.

Work Environment

This position is based on-site at a small ammunition facility located outside the city, offering a combination of office and production floor work. The Case Engineer spends time in a technical office setting for documentation, analysis, and collaboration, as well as on the manufacturing floor working directly with equipment such as draw presses, forming presses, trim machines, and wash lines. The environment supports hands-on engineering, close interaction with operations and quality teams, and the opportunity to work autonomously on a proprietary new product line while contributing to continuous improvement in a specialized manufacturing setting.

Job Type & Location

This is a Contract to Hire position based out of Kingsville, MO.

Pay and Benefits

The pay range for this position is $80000.00 - $120000.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Kingsville, MO.

Application Deadline

This position is anticipated to close on Oct 30, 2026.

Workplace Type

This is a fully onsite position in Kingsville,MO.

About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Apply About employer

More about this job

Skills

Manufacturing processes
Program management
Regulatory compliance
Documentation
Security regulations
Research
Quality assurance
Process improvement
Troubleshooting
Process engineering
Reporting
Problem solving
Work independently
Collaboration

Report this job